Used Cutterheads for sale (131)

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the Lrodpfx Aeul Efmjfzsw gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (timber thickness): 6 to 155 mm - Max. finished timber section: 155 x 230 mm - Min. working length: 480 mm - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6,000 rpm PLANER/MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood with gas struts - Raised operator control panel - 2,500 x 250 mm steel infeed table Floor height: 880 mm Side-entry spring-loaded feed roller Manual table lubrication unit after surfacing 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical spindles, 1 x 7.5 kW each TERSA cutterheads Ø125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø125 x h.240 mm Adjustable exit pressure pad 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller presser FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatic feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER SPECIFICATIONS: - CE marking - Power supply: 380V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stops front/rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Cardan shaft spindle drives - Digital readouts (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower beam for thickness adjustment, Raise/lower motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable cutter/tool dimensions: On bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140 x 12 x 40 mm Lodpfeu Sr Ivex Afzerw - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connector: 1/2" G - Dust extraction, central upper port: Ø250 mm Required air speed: min. 25 m/sec Airflow: 4,500 m³/h - Technical manual included. - Machine fitted with 4 TERSA shafts Footprint: 4,700 x 1,700 x h.1,800 mm Weight: 2,240 kg Please contact us for supply of consumables, accessories, and/or extraction systems.

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Ledpfx Aswz Nzmsfzsrw Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Lodody Hm Dspfx Afzorw Dust extraction outlet 100mm. Machine stand

Condition: new, Year of construction: 2025, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! Lrjdpfsvk Saxjx Afzjw • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: refurbished (used), Year of construction: 2001, machine/vehicle number: 081001, WOODWORKING TENONING MACHINE WITH AUTOMATIC FEED, 4 OPERATIONS Brand: VERTONGEN Model: PENTHO C 4 B Serial No.: 081001 Year: 2001 (Photos taken prior to overhaul, functional testing & cleaning) Automatic cycle woodworking tenoner with manual operator group selection and fine adjustment. MACHINING CAPACITIES: - Max. wood section (thickness x width): 135x230 mm - Max. cutting height: 135 mm MACHINE CONFIGURATION: Table: - Cast iron table 400x600 mm, tiltable up to 60°, positioning by clamping - 2 pneumatic hold-down clamps for wood clamping - Extendable metric stop ruler with double stop, anti-splinter profile, and end support 1) Sawing: cross-cutting - 2.2 kW (3 HP), blade speed 3,000 rpm - Saw blade Ø400 mm, bore Ø30 mm - Cutting depth adjustment 140 mm 2) Top and bottom planing cutterheads with carbide knives: - Cutterhead with W3 carbide knives, Ø160xL140 mm - Top head 3 kW / bottom head 2.2 kW, rotation speed 4,500 rpm - Independent manual fine adjustment for withdrawal or positioning: Top cutterhead axial movement: -40/+35 mm, vertical travel 0-135 mm Bottom cutterhead axial movement: -40/+10 mm, vertical travel 0-80 mm 3) Spindle moulder: - Power 5.5 kW, speed 4,000 rpm - Spindle Ø50 mm, useful length 160 mm Lrsdpfxjwxdb Ns Afzew - Vertical travel 150 mm, horizontal travel 130 mm - Max. tool diameter (tenoning discs) Ø350 mm 4) Shoulder head (cutterhead) for left and right operation: - Power 2.2 kW (3 HP), speed 4,500 rpm - W3 carbide knife cutterhead Ø160xL140 mm - Manual fine adjustment for withdrawal, positioning, and travel OTHER TECHNICAL FEATURES: - Main power supply: 3-phase + N + PE, 400V, 50Hz - Installed power: 15.1 kW (20.5 HP), rated IN 30A - Counters for manual operational adjustments - Pneumatic supply: 6 bar working pressure (for hold-downs) - Dust extraction ports and recommended airflows: 360 (saw) + 2500 (cutterheads) + 1250 (spindle moulder) + 2500 (shoulder head) m³/h Air velocity 25-30 m/s Manifold supplied, 1 connection, flanged edge 280 mm. If shoulder operation is used, provide for branching: 160F/150F/150F flex hoses - CE marking, automatic retraction of guards, braked motors, padlockable main isolator, emergency stop buttons Transport dimensions (LxWxH): 3.70 x 1.70 x h.2 m Weight: 1650 kg