Used Debarking System for sale (40,533)

Condition: used, mileage: 1,16,700 km, power: 323 kW (439.16 HP), first registration: 08/2023, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,970 mm, fuel: diesel, fuel tank capacity: 500 l, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 8,700 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, General Information Year of manufacture: 2023 License plate: 40-BVR-7 Gkjdpfsyhnnwox Adksd Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 12,153 kg Payload: 18,347 kg Gross vehicle weight (GVW): 30,500 kg Functional Pump: Yes Condition Damage: none VOLVO FM 430 6X2 READY-TO-DRIVE, ACCIDENT-FREE + HYVA T22-62-S ROLL-OFF TIPPER EURO 6 L PACKAGE, 430 HP 6X2 DRIVE, LAST AXLE LIFTABLE AND STEERABLE AIR SUSPENSION WHEELBASE 465 CM I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE NEW MODEL FM CABIN, AIR CONDITIONING, NAVIGATION, TOUCHSCREEN, LANE ASSIST TOW HITCH HYVA T22-62-S ROLL-OFF TIPPER TOOLBOX AND NET BOX HYDRAULIC CONTAINER LOCKING SYSTEM VAB COVERING SYSTEM FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: reconditioned (used), functionality: fully functional, Log debarker CAMBIO 35. Gkedpfxezwdgmj Adked Equipped with a PIRAMY knife system and a new hydraulic roller tensioning system. Recently underwent a major overhaul.

Condition: used, Schatz Advanced Assembly System, Crankshaft Assembly Station, Assembly Workstation Schatz Assembly System Length: 5450 mm Height: 3000 mm Tilting stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist 1 x Schatz 907500 System without Advantech TPC-1260 TE touch panel PC Gkedjihiiijpfx Adked More assembly systems in other sizes – new and used – can be found here.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas Godpfsz D Uvpex Adkjkd The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: excellent (used), power: 49 kW (66.62 HP), fuel type: diesel, first registration: 09/2018, = Additional Options and Accessories = - Enclosed cabin = Notes = Hydraulic chain excavator Caterpillar 308E2 CR with CW10 digging bucket – 7,405 operating hours = Further Information = Gsdps Aiigxofx Adkekd Year of manufacture: 2018 Operating hours: 7,405 Empty weight: 8,360 kg Quick coupler system: Yes CE marking: Yes Technical condition: very good Reference number: 77 Serial number: CAT0308EVFJX11423 = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2005, Carton erector Pextor Booster Carton sealer Glupex Handle applicator Flexrain Mapp VO3 Transport Fa. Federspiel Filling machine Rapak 1230 E Aseptic for 3 and 5 liters 10 liters should be hot-filled Aseptic filling machine for wine Capacity: 3 liters: 16 bags/min 5 liters: 15 bags/min 10 liters: 12 bags/min Running time: 5,800,000 cycles Year of construction of the complete line: 2005. The line is currently dismantled but can be inspected. Gedpfx Ao Ai H Aysdkskd Operated by 1 person.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 25C862, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 25C862-OC - UPC Code: 00755652654278 - General industry - sealants, adhesives, silicones - Application: Beading and encapsulation - Maximum flow rate: 9 L/min - Maximum working pressure: 207 bar - Air inlet: 1/2" - Mixing ratio 1:1 - Pressure ratio 36:1 - For 20 L drums - Second-hand product, fully inspected Gksdsza Utqspfx Adksd

Condition: new, functionality: fully functional, Brand: Graco Reference: UF2191 UPC Code: 00769946265422 Application: Gkodpfx Adsx Dl E Reksd – Metering, mixing, and dispensing systems – Suitable for bonding, sealing, encapsulating, gasketing, and syringe filling – Compatible with most two-component materials Key industries: – Product assembly – Automotive (components and electronics) – Consumer electronics – Medical sector – Sporting goods – Home appliances Mix ratio: 1:1 to 12:1 depending on selected cylinders Current configuration: 10:1 (Piston 1 LCC800 / Piston 2 LCC080) Maximum output: 2–70 cm³ Maximum working pressure: 207 bar Power supply: 100–240 V, 50/60 Hz Condition: Fully serviced, second-hand unit Warranty: 1 year Shipping: Delivery or in-store pickup VAT: 21% NOT included (available with VAT included) VIES/TAX ID companies: VAT refund possible Imports: Customs duties and tariffs to be paid by the buyer (Incoterm: DAP)

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, retarder, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Intarder - Air conditioning - PTO (Power Take-Off) - Rearview camera - Tow hitch EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP INTERCHANGE SYSTEM DUMP TRUCK + MIXER MAN TGS 41.480 BB 8x4 EURO 6e EuromixMTP mobile mixer + dump truck Vehicle data Year of manufacture: 2026 New vehicle MAN TGS 41.480 8x4 BB CH Concrete mixer chassis Wheel arrangement: 8x4 Permissible total weight: 41,000 kg Wheelbase: 2,505 mm Engine: MAN D2676 353 kW (480 hp) 2,450 Nm torque Emission standard: Euro 6e MAN TipMatic 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Cab NN (narrow, medium-length, standard height) Cab color: Pure white (RAL 9010) Engine & Drivetrain MAN D2676 Euro 6e engine 480 hp / 2,450 Nm MAN TipMatic automatic transmission Efficiency driving program Manoeuvre program Idle Speed Driving Rocking function High-performance engine brake MAN PriTarder with MAN EVBec Heated fuel filter Gsdjym S Ufepfx Adkskd Fuel pre-filter with water separator Gearbox PTO, switchable Preparation for engine PTO Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 8,000 kg Rear axles 13,000 kg Differential locks on both rear axles Axle ratio i = 3.63 Front, rear and second rear axle stabilizer Emergency steering pump Steel rims 9.00 x 22.5 Tires 315/80 R22.5 Tire pressure monitoring system (TPM) Tire temperature display Tire pressure display for trailer Wheel nut covers Cab & Comfort Cab NN Air-suspended comfort driver's seat with armrests Co-driver's seat with storage box Multi-function steering wheel 12.3-inch professional instrument cluster Digital tachograph MAN Media System Advanced with navigation MAN SmartSelect control MAN sound system Smartphone integration (Apple CarPlay/Android Auto) Dump Truck Equipment: (also as 3-sided dump truck) EuromixMTP TMK 16m³ TMK 18m³ TMK 20m³ dump truck (HARDOX) Semi-circular shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear wall pivoting Spare wheel holder with winch Aluminum fenders Versatile lighting options Access steps to the tipper body (Access steps: Inside the tipper body) EuromixMTP scissor tipper stabilizer Mobile Mixer Equipment (ALSO AS EM 9m³) Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off dump trucks • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian) • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: ...

Condition: used, Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot dishwasher that can wash with or without granulate. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a pass-through model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinner technology. Gkodpfx Adsf Hp Tpjksd Steam reduction as standard Save energy and drying time with the ECO-FLOW liquefaction system. No pre-washing or manual scrubbing thanks to powerful washing with water and granulate. High hygiene and fast drying with spin cycles. Heat recovery and a condensation battery reduce steam in the room. Complete dishwashing system with loading table and cart. Easy maintenance – can be performed from the front or from the side. Effective dishwashing and high capacity with a double washing system. You can find more dishwashers in our shop. International shipping on request!

Condition: new, Year of construction: 2026, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Gkjdpfx Ajwxlygedkod

Condition: used, Wölco Lupo VPAB-53 Labeling Machine Fully automatic labeling machine for professional labeling Wide-belt multi-labeler Manufacturer: Wölco Machine Type: Lupo VPAB-53 Year of Manufacture: 2011 Connection: 400V Current: 3 x 16 A Power: 2.5 kW Air: 6 bar Gkodpjh N Sa Rofx Adkjd Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine Type: Lupo VPAB-36 Year of Manufacture: 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for continuous industrial operation when precise and variable label printing with position-accurate application is required. Sato S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer, with its robust design, is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED for optimized monitoring of the printing status • Robust design for harsh environments • Very fast printing speed with a maximum printing speed of 16 ips and adjustable speed control for retraction • The printhead can be easily replaced without tools • Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools • Easy loading/unloading to/from an SD card or USB storage device without using the SATO "All In One Tool" application • Supports external printer settings via the SATO "All In One Tool" application or a web browser • Supports a multilingual display menu and the printing of Asian fonts • Supports emulations in standard firmware • Supports various communication interfaces • Supports the SNTP protocol ?v=8RXShKhNsD4&list=PLIoSzgIDE9Judwq07lJFUJWOHG7dJPyms More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Ecat ovo compact EG10 In-Ovo vaccination pressure injection system, embryo injection system. For modern hatcheries, the Egginject® Compact, thanks to its dual-pressure injection system, enables safe in-ovo vaccination. The Egginject dual-pressure injection system is a patented technology that allows for individual adjustment of the injection depth for each individual embryo, regardless of size and age. The compact Egginject allows for vaccination in small and medium-sized hatcheries. - Adaptable to all types of incubation trays. - Reliable and robust design for high loads. - Easy to use: simple and user-friendly. - Can be used as a stand-alone unit or fully integrated into the hatchery automation line. Year of manufacture: 2013 Gedpfx Adjdx Axlekskd Item condition: used

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. Gkodpfxog Ipp Aj Adked System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Gedpjzd Rmgjfx Adkjkd Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Böllhoff Uniquick Vario Screw Feeder   UNIQUICK Feeder Type 360 Plastic sorting container, ∅ 360 mm Quiet and gentle conveying Optimal helix dimensioning depending on the conveyed material (width and height) Integrated and controlled deflector High wear resistance Consistent conveying performance through amplitude control Housed in a sound-insulated enclosure, mounted on a frame Belt width: 20 mm Head diameter of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l   SIM BB-10-C (ws) Belt Bunker Bunker basin, chute: Stainless steel Belt: White, FDA-approved Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC geared motor 230V / 50Hz Bunker with innovative drive to ensure a metered, quiet and gentle feeding of screws and fasteners.   UNIQUICK Multi Modularly expandable 3-way diverter Gkodpfewbr N Hox Adked Distributes the sorted screws to three stationary screw driving machines   Singulation Adapted outlet rail Precise guidance at the head Modular design Few format-dependent parts Reproducibility of the component Sensor monitoring Maintenance-free   Noise reduction Screw conveying in a plastic container Lining with noise-reducing material Air-tight blowing of screws   Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017   Dimensions: HxWxD 1050 x 650 x 650 mm   Technical data   You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics with the "all-round laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. Gsdpfx Ajw U T Ebodkskd It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Functionality: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Gsdpswxv Hkefx Adkekd Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. Gksdpfxoxbck Ee Adksd The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Venjakob RNV 2.0 Exhaust Gas Purification System The system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas supply (the auxiliary burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely decompose into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The purified, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, very little additional gas needs to be supplied. System data Gkodpfx Adozrl Ibokod Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Manufacturing number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / heating value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 - 1,500 dPa Max. combustion chamber temperature: 850 °C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross-connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition wall Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central unit module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection, IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Module designation Fum210/6DP1210-8BC Teleperm XP Binary module Profibus connection interface module IM616 6DP1616-8BA More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request! Gksdpfx Aotzbdkodkjd

Condition: used, Mosca RO-M strapping machine Manufacturer: Mosca Type: RO-M Semi-automatic cardboard strapping Band width: 4 to 12 mm Heat-sealing system Adjustable band tension Control: ecomat 100 Foot pedal for triggering the strapping process Gkedpjtncc Uefx Adksd Table surface: W 640 mm Working height: 830 mm Power connection: 400 V You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing Gkedpoibh Tkjfx Adkjd • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: used, Spray booth water stabilizer Technical data: Gkodpfoiu Hwuox Adksd - Agitator - Pump - Filling neck, Ø 9 cm - Thermostat display - Level indicator - Ø 176 cm, H: 67 cm, thickness 3 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system manufactured in 2019. This automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line includes, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical data & scope of supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift operation (condition appropriate for age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 Gjdozka Sfepfx Adkjkd 1x Thermal post-treatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to the in-house maintenance department, it is at the state of the art. Electrical & mechanical: Mostly in a condition appropriate for age or good condition. Cybersecurity data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!