Used Deburring Machine for sale (83,897)

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Dwsdpfx Aswfg Hueddsf

Condition: reconditioned (used), Year of construction: 2017, operating hours: 3,862 h, functionality: fully functional, Used machine Year of manufacture: 2017 General Specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outside brush diameter: 350 mm Table opening: 0 – 100 mm Minimum workpiece size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min Electricity 1st Unit – W – sanding belt: 11 kW 2nd Unit – RB – rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Dust extraction at 100 mm WS Sanding belt unit: 2000 m³/h Vacuum pump: 1500 m³/h Dodpfx Adew Dzytedswf Weight: approx. 6000 kg Includes one set of brushes and starter set of sanding belts. New extraction system optionally available. Machine has been technically overhauled (conveyor belt and bearings are new, value approx. €20,000) Immediately available.

Condition: ready for operation (used), Technical characteristics Dwsdpfsundf Dox Addsf knives and milling unit Power and Motors Overall dimensions

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Dsdjwa Ubcopfx Addowf Machine weight: 2,100 kg Grinding equipment Grinding belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers - Dust extraction

Condition: as good as new (ex-display), Year of construction: 2024, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide Dedpfetr Aviex Addswf The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Standard workpiece thickness: 0.8 - 150 mm Dwedpfxepwh Tfs Addsf Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Dodpjtul N Dsfx Addowf

Condition: new, Year of construction: 2023, total length: 13,000 mm, total width: 8,000 mm, total height: 17,000 mm, workpiece weight (max.): 500 kg, overall weight: 600 kg, BMZ Manual Deburring Machine BMZ M1 Thanks to its vacuum table, the BMZ M1 allows for simultaneous deburring of multiple parts by hand. Two different brushes can be installed on the system, and changing the brushes is very quick and easy. Because the brush is positioned parallel to the table, it enables more even grinding. The system's motor weight is balanced, making it ergonomic for the operator. With the BMZ M1, you achieve maximum quality at a minimal cost. Application Areas Edge Rounding Dwsdpsrp Dp Nofx Addjf Deburring Slag Removal Oxide Layer Removal Polishing

Condition: ready for operation (used), Technical characteristics Dsdeundd Hspfx Addswf Welding machine: Welding of a frame (4 x 90° angles) in one automatic work cycle for the positioning of the profiles and digital positioning of the welding heads Fully automatic evacuation system of the welded frames The machine complies with CE safety standards and the four welding heads are equipped with a cover to ensure perfect protection of the operator All types of profiles (programmed KBE and PROFIALIS) Welding capacity: height 200 mm - width 140 mm Dimensions: inside 150 x 250 mm - outside 3150 x 3600 mm Welding parameters are individually adjustable on each welding head Electronic adjustment and control of the welding parameters on the screen Electronic temperature control of the welding plates and the limiting knives with digital display and alarm on the control panel Automatic adaptation of the welding time to the profile section Compensation system per profile piece to eliminate cutting tolerances (+5 / -2 mm) Perfect bead limitation for white, colored or structured profiles Automation - error-free production File from your frame program, barcode reader "Desired size = welded size" allows for optimized cutting of the panels Possibility to generate a production report per period Machine control by PLC - PC of the latest generation Diagnostic system on screen (text and figures) Deburring machine : All types of profiles and combinations Speed and automation: high precision of the tool guides on 4 axes Automation of the control system Electronic recognition of the profile type Selection of the profile type by means of barcode label or online Automatic detection of crossbars High-frequency motors, adjustable speeds without interval All movements and speeds are adjustable from the control panel Selection of grooving or flat finishing as standard on the machine PLC control - PC of the last generation with INTEL processor Diagnostic system on screen Easy programming of new machining and profiles Power and Motors Overall dimensions

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm MACHINE DETAILS Voltage: 3 × 400 V Dwedpfx Adewa T Saedjf Frequency: 50 Hz Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: used, Year of construction: 2019, operating hours: 2,120 h, functionality: fully functional, machine/vehicle number: SN026032, The machine was used in our own production facility in Bad Wurzach, Equipment: mold | mold closing compensation | camera set. As a package with 2 conveyor belts and a WDE 3002 wet extraction unit. Further information on request. The SBM-XL S2B2 grinding and deburring machine is designed for edge rounding and oxide layer removal on both sides of steel parts and stainless steel in a single operation. The LISSMAC system is suitable for processing laser parts. Technical data SBM-XL S2B2: Passage width: max. 1500 mm Processable sheet thickness: 0.5 - 50 mm Load capacity: 300 kg/lfm Voltage: 400 V / 50 Hz Mains form: 3~ PEN / 3~ PE+N Rated current: 74.3 A Rated power: 33 kW Protection class: IP 42 Infinitely variable feed: 0 - 4 m/min. Sheet thickness adjustment: electric Tool setting: electric Dwodpfst Tx Dxox Addof Weight: approx. 4200 kg Dimensions (W/D/H ): approx. 3600/2100/2000 mm

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display Dwjdpfx Adev Hxrgsdsf - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Year of construction: 2007, condition: ready for operation (used), Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible. Dedpfx Adjudy S Dsdewf

Condition: new, functionality: fully functional, working width: 1,300 mm, warranty duration: 12 months, workpiece width (max.): 1,300 mm, RWT deburring machine possible configuration Four-station machine: 1. deburring with contact roller grinding belt 2. cup brush for oxide layer or slag removal 3. cup brush for edge rounding 3. finish sanding via contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) - removes burrs that protrude above the surface of the material, removes scale and corrosion from the surface Planetary disk brush unit (D) - rounds the edges, creates radii and removes the oxide layer on the sides after laser cutting. Rotary unit (A) with finned brushes - deburring and edge rounding without foil removal, surface uniformity. Dwedpfeudal Dex Addef Brush unit made of abrasive fleece (B) - pre-cleans and polishes surface material These deburring machines are used for the following tasks: deburring parts after laser cutting - deburring edges, removing oxide and finishing the surface Deburring of parts after plasma cutting - slag removal, rust removal, removal of material overflows, edge rounding and surface finishing. Deburring of parts after punching - removal of sharp edges, edge rounding and final surface finishing. Deburring of parts after water jet cutting - deburring and rounding of edges, removal of marks after water jet cutting and final surface treatment. Deburring of stainless steel parts covered with foil - deburring and edge rounding without foil removal. Main advantages of the machine: Modular system - we design the machine exactly to your requirements High-quality and uniform deburring of all edges of the product Processing of very small workpieces with the magnetic or vacuum table Very easy operation of the machine thanks to the Schneider Electric touchscreen Grinding, deburring and finishing with one machine Very quick change of tools and rigid machine frame In view of the large number of possible machine configurations, we recommend a personal consultation and free grinding samples at our premises, which we use to assess our customers' requirements and then propose the most suitable machine configuration for the production in question.

Condition: ready for operation (used), Technical characteristics inferior milling countour milling of interior angles with tilting and curved surfaces Dwodpfeundfqsx Addsf Power and Motors Overall dimensions

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, Dodpfxjt D D Nzs Addjwf No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN040890, working width: 1,350 mm, sheet thickness (max.): 120 mm, total length: 3,300 mm, total width: 2,170 mm, total height: 2,260 mm, workpiece weight (max.): 500 kg, overall weight: 5,200 kg, input voltage: 400 V, warranty duration: 12 months, protection type (IP code): IP42, input frequency: 50 Hz, input current: 56 A, GRINDING AND DEBURRING MACHINE FOR HEAVY PLATE. SLAG REMOVAL, DEBURRING, EDGE ROUNDING | Equipment: Tool, magnetic track, conveyor belt cleaning brush, internal lighting, ME 5000, ID key switch, camera set, LiServ, energy measuring package. Available from October 2025. | SMD 335 DRE - P Edition Passage width 1350 mm Processable material thickness 1.0 – 120 mm Load capacity 500 kg/m Voltage 400 V / 50 Hz Power supply 3 + PE / 3 + PEN Rated current 56.0 A Rated power 25.5 kW Protection class IP 42 Feed rate stepless 0.3 – 8.0 m/min Dwodswza Udepfx Addof Weight approx. 5200 kg Dimensions (W/D/H) approx. 2170/3300/2260 mm

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Dodpfeucw Dzjx Addewf

Year of construction: 2016, condition: ready for operation (used), A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible. Dedpfx Aev Sufysddswf

Condition: new, Timesavers Series 12 WW The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm. Dodowqf U Uopfx Addjwf

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,060 mm, Multiple operations in one pass: deburring, rounding, oxide removal, metal slag removal ... Abrasive belt aggregate (K) TopBrush aggregate (4PTB) Working width: 1060 mm Dodpfx Aer Iydgjddowf Fast throughput: rounding at 4 m/min Operator-friendly operation via touch screen. Ex showroom machine!

Condition: excellent (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR with Wet Dust Extractor Surplus to requirements with only 58 hours working time This machine can be re-configured to include deburring top-brushes or barrel brush in place of abrasive belt position 2 or 3 or both 2&3 (position 1 to remove vertical burrs) free of charge - enquire for more information 650mm processing width Wet Dust Extractor included with ducting and installation (installation free in Mainland UK only - for Europe please apply for installation price) Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 3M 237AA Trizact Belts will achieve close to a mirror finish in a dry application on this machine on material over 1mm thick (P2000 FEPA abrasive finish) 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us Dsdpownukmofx Addewf

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Dodpsucw Rbsfx Addjwf The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: as good as new (ex-display), functionality: fully functional, working width: 150 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes and strips. Deburring, rounding and finish grinding. Abrasive belt aggregate (K) TopBrush aggregate (2TB) Dedpfxjr Iyg Aj Addswf Working width: 150 mm Ex showroom machine!

Condition: new, Model Name B3 Entgrat-/Anfasmaschine Dsdpjk Au Drjfx Addewf