Used Deburring Machine for sale (63,704)

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit Nodpfjppgcyjx Aa Djwb for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, Model Name Nedpfx Aek Au Droa Dswb B3 Entgrat-/Anfasmaschine

Condition: new, Model Name Nedpjk D Nyisfx Aa Dowb Anfassystem UZ12 ULTRALIGHT

Condition: new, Model Name Anfassystem B22 ZERO Nwedpfjk Au Dvjx Aa Djb

Condition: used, Year of construction: 2000, diameter of brush 250 mm width of brush 80 mm turning speed range 1500 / 3000 U/min voltage 380 Volt total power requirement 2,0 / 3,0 kW weight of the machine ca. 175 kg dimensions of the machine ca. 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely Nwsdoxaa Ifjpfx Aa Dob - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : ?machineno=1008-9238987

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses Nwsdpsxaamnjfx Aa Djb - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" Nodpfxoxab Hpe Aa Djwb - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,8 x 1,4 x 1,4 m Nwsdpfx Aox N Nc Tsa Dsb

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories Nwjdpfov N I Hlsx Aa Djb

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 5300 kg This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information. Nsdjx D S A Nepfx Aa Dewb Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm total power requirement: 31,3 kW Nwsdexc E Icjpfx Aa Deb weight of the machine ca.: 4 t dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m

Condition: used, Year of construction: 2015, Technical details: Nodpfxol Ha Ubo Aa Dswb weight of the machine ca.: 4 t

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm Nwsdpfx Aoxxl Sgea Dob gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB Nedex Uwlaspfx Aa Dowb 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. Nsdpfxjx U D Dpj Aa Djwb The F200 XL is a 3-station machine and comes standard with the brush height tracking system designed by Q-Fin. In combination with the simple button system, this ensures that setting up and working with the F200 is self-explanatory, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with continuously adjustable speed on the conveyor and on the brush(es) and/or grinding head(s), making all possible operations and results achievable. You determine the desired finish yourself. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, enabling even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is not without reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. It has been checked, tested and is working 100% properly. The F200 XL is a 3-station machine suitable for deburring, grinding and/or rounding small sheet metal parts. This deburring machine has a grinding unit as its first processing station, followed by two cup brushes. The grinding belt removes burrs or gives the product a nice line finish. The brushes ensure the desired rounding of the product and give the surface an even finish. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure Nwsdpsx U Dx Hefx Aa Djb effective fixation of the products to be processed on the transport table, allowing even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is with good reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. Nodpox Uz Ilefx Aa Djwb On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. It has been checked, tested and is working 100% properly. Nwodpfsx Ux Rwsx Aa Djb Removing slag is a labour-intensive task that often still involves the use of a hammer and chisel. Alternatively, an electrically powered hand-held machine can be used for this purpose. Due to the heavy load during operation, both for the operator and the hand-held machine, these hand-held machines need to be replaced regularly. This results in high costs, additional waste and possible health problems for the operator. Manual slag removal is time-consuming and stressful for both the operator and the machines, leading to high costs and wear and tear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding. The removed residue is collected in a container and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed with touchscreen controls for ease of use. The slag is effectively removed by two counter-rotating slag removal rollers, which strike the product twice per revolution. The result is a flat product that is ready for further finishing.

Condition: good (used), Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h Nwodpfx Aasx Ivycs Deb

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1400 mm Measurements depth 2600 mm Measurements height 1800 mm Machine weight 2000 kg Additional Equipment Aperture Width: 1000 mm Material Throughput: Automatic Adjustment Medium: Electrical brush block This LISSMAC SBM-M 1000 B2 deburring machine was manufactured in 2012. It features an automatic material throughput with an aperture width of 1000 mm and can handle sheet thicknesses up to 20 mm. The machine is equipped with a powerful brushing motor and offers an infinitely variable feed adjustment. Weighing 2000 kg, it's designed for robust and precise deburring operations. If you are looking to get high-quality deburring capabilities consider the LISSMAC SBM-M 1000 B2 machine we have for sale. Contact us for more information. Nwjdpox D R Iqofx Aa Deb Application Types Grinding

Condition: used, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 120 mm, overall weight: 4,200 kg, power: 49.8 kW (67.71 HP), 12 months warranty Nwodpjx Svwvsfx Aa Dob

Condition: ready for operation (used), Year of construction: 2000, working width: 1,300 mm, total height: 2,240 mm, overall weight: 2,300 kg, product length (max.): 2,070 mm, General Data Machine weight 2300 kg Measurements height 2240 mm Dimensions Machine Length 2070 mm Technical Specification Nsdox D E Hzspfx Aa Dswb Working Width 1300 mm This Fladder 300 Gyro was manufactured in 2000. It features a working width of 1300 mm, six brush heads, and a rotating and oscillating sanding unit. Equipped with two vacuum fans and a vacuum conveyor belt, it ensures efficient material handling. The motor power is 7.5 kW, and it offers an infinitely variable feed speed of 2 - 8 m/min. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum Nwjdpfsx H Tvfsx Aa Dob or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: excellent (used), Year of construction: 2025, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted. Njdpefhb N Sefx Aa Dewb

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Nsdogkwckepfx Aa Dswb