Used Deburring System for sale (35,234)

Condition: good (used), Year of construction: 2007, I am selling a Kelch Seca 04E measuring device. Hodpfx Ajug T Hmjgwsfd

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Hodpfx Agetqpd Hjwjfd

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Hfodpfx Ajyt Ihbogwsd Further information can be found in the attached PDF.

Year of construction: 2025, operating hours: 300 h, condition: new, functionality: fully functional, We offer delivery and installation of the equipment in countries within the European Union. We can also provide videos demonstrating the equipment in operation. 6 Seats – Fully Installed – Ready for Use Price USD 24,500 Turnkey 5D Cinema Attraction, Ready for Operation A fully operational 6-seat 5D motion cinema system, manufactured by Movie Power Company Ltd. (China), is available for sale. The system is already imported into the European Union (Bulgaria), installed, tested, and functioning. Live demonstrations on site are available. This enables the buyer to begin operating immediately, without any waiting period for production or international shipping. Key Benefit for the Buyer The system is already imported into the EU, saving the buyer significant costs and time associated with: • International shipping • Customs clearance • Import duties • Delivery lead time (typically 2–3 months) All these expenses have been covered by the seller. Manufacturer The equipment is produced by Movie Power Company Ltd., one of the leading Chinese manufacturers of motion cinema and immersive entertainment systems. Their installations operate globally in: • Theme parks • Amusement parks • Shopping malls • VR arcades • Entertainment centers Included Equipment Hfodpfx Agjyrig Aowsd The system is a complete turnkey 5D cinema attraction, comprising: • 6 motion simulator seats (two 3-seat platforms) • Dual Epson projection system • 3D metal projection screen (16:9) • Cinema control system • Professional audio system • 20 pairs of 3D glasses • 60 HD 5D movies Special Effects The cinema includes synchronized environmental effects: • Wind • Rain • Snow • Bubbles • Lightning • Smoke • Vibration • Leg sweep • Back push • Ear blowing • Back poke These effects deliver a fully immersive cinema experience. Space Requirements Approximate installation area: 6 m × 4 m × 3.5 m height Warranty The equipment is still covered by the manufacturer’s warranty.

Condition: good (used), Year of construction: 2006, power: 3 kW (4.08 HP), Zentner Soltec Screen Washing Unit ST 100 Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of manufacture: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Hsdpfx Agjyrndgewofd Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Enclosed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Special features: – EX safety signs present – Integrated exhaust/ventilation system – Compact design with separate control cabinet Location: Schierling Viewing possible by appointment.

Condition: excellent (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C165’ Object of sale: 1 x Canon imagePRESS C165 with the following equipment: incl. Staplefinisher W1 Pro Hfsdpfx Aewkqxxsgwod Not the right equipment? It is no problem to configure the machine according to your wishes. Please contact us! Counter readings: Total: Approx. 80,775 pages Colour: Approx. 53,342 pages Black: Approx. 27,433 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: Hfedoxzqa Ujpfx Agwed You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, In this offer you are purchasing a used "Plockmatic RCT II" brush trimmer Object of sale: Hfjdpfx Ajqyb U Sogwed 1 x Plockmatic Trimmer RCT 2.0 Rotation, creasing and 2-sided trimming For various Xerox models Counter readings: Total: Approx. 987 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Machine type: Vibratory bowl feeder / Parts feeding systems Hfsdpfx Agjytqgmjwjd Design: Bowl feeders and linear tracks Version: Multiple feeding systems available Conveying system: Vibratory bowl feeder with linear track Feeding unit material: Stainless steel / Metal construction Function: Automatic feeding and orientation of plastic parts Application area: Injection molding automation / Assembly systems / Packaging lines Buffering system: Bowl container for parts storage Integration: Component of automated production lines CE marking: Available Further information, technical specifications, and quantity upon request.

Condition: used, suction capacity: 5,000 m³/h, filter area: 108 m², Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Device dimensions: Filtration unit: Width: 1.95 m Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Hfjdpoxx R Nkefx Agwjd Width: 1.40 m x 1.25 m Height: 1.25 m

Condition: good (used), mileage: 5,45,100 km, power: 309 kW (420.12 HP), first registration: 02/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,080 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Bluetooth - Digital tachograph - Tachograph (control unit) - Fixed - Halogen headlights - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Additional brake system = Remarks = Number of axles: 3, Configuration: 6x2, Unladen weight: 9580 kg, Gross weight: 26000 kg, Total tank capacity: 390 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen headlights, Lane departure warning system, Air conditioning, Heated seats, Bluetooth, Engine power: 309 kW (414 HP), Fuel: Diesel, Euro: 6, Transmission: Automatic, Transmission type: ZF, Gears: 12, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steering; Left tyre tread: 6 mm; Right tyre tread: 5 mm Axle 2: Twin tyres; Inner left tread: 7 mm; Outer left tread: 5 mm; Inner right tread: 13 mm; Outer right tread: 12 mm Axle 3: Lift axle; Left tyre tread: 11 mm; Right tyre tread: 11 mm Weights Curb weight: 9,580 kg Payload: 16,420 kg Gross vehicle weight (GVW): 26,000 kg Functional Loading platform height: 125 cm Hodpfx Agjyupcpjwjfd Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good prices • Professional transaction • We speak many languages • We understand our customers • Import and transport support • (Export) license plates issued quickly • Professional technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 5,53,669 km, power: 350 kW (475.87 HP), first registration: 06/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 8,500 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Bluetooth - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Halogen lighting - Hydraulic system - Short cab - Manual adjustment - PTO (Power Take-Off) - Pump - Radio/Cassette - Reversing camera - Fabric upholstery = Remarks = Number of axles: 4, Configuration: 8x4, Total tank capacity: 390 liters, Trailer coupling, Kingpin diameter: Special, Fifth wheel: Fixed, Number of differential locks: 2, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen, Bluetooth, Flashing lights, Engine power: 350 kW (469 hp), Fuel: Diesel, Euro standard: 6, Transmission type: Telligent, Gearbox: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Pump, Hookloader height: 131 cm, Central locking, Seating configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: MB, 12-speed, Automatic Axle configuration Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 9 mm; Tyre tread right: 12 mm Axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Tyre size: 315/80R22.5; Dual tyres; Inner left tread: 12 mm; Outer left tread: 12 mm; Inner right tread: 13 mm; Outer right tread: 12 mm Axle 4: Tyre size: 315/80R22.5; Dual tyres; Inner left tread: 5 mm; Outer left tread: 6 mm; Inner right tread: 4 mm; Outer right tread: 7 mm Functional Loading height: 131 cm Hodpfx Asyupa Iegwsfd Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers for used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: Hfodsvb Hanepfx Agwed - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel Hedpfxevb E Uqs Agwjfd - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Power per blast turbine: 22 kW Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Hfjdpfx Aoyua D Rsgwjd Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Feed via external rail system CE marking

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station Hfodpfxjv Ihdzo Agwod The machine has been checked, is functional, We can send a video.

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm Hfjdpfx Agoytgrxewjd -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors Hfedpfoynmw Rox Agwjd * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table Hodpfx Agoynmwkowsfd 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Hfsdox U Amispfx Agwod Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: new, Technical data: Number of spindles: 23 Max. workpiece size: 885 x 3000 mm Distance between first and last drill: 704 mm Distance between the centres of each spindle: 32 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Operating pressure: 6 - 7 bar Hfjdpfx Aoyub D Sjgwod Motor power: 1.5 kW Air consumption: 10 l/cycle

Condition: used, machine/vehicle number: 006376, Max. panel width: 1000 mm Hfedpfjyqxypox Agwjd Max. panel length: 2500 mm Length of conveyor: 10000 mm Panel return for edgebander: Left

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Availability: short-term Hfsdpfxjw Nadmo Agwed Location: Flörsheim

Condition: good (used), mileage: 7,48,274 km, power: 353 kW (479.95 HP), first registration: 04/2019, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, onboard computer, power assisted steering, power mirror, second fuel tank, spoiler, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: Tyre size: 385/55R22.5; Steering Rear axle 1: Tyre size: 315/70R22.5; Double wheels Rear axle 2: Tyre size: 385/55R22.5; Steering Weights Empty weight: 10.268 kg Carrying capacity: 15.732 kg GVW: 26.000 kg Hsdpfxjyucdyo Agwjfd Maintenance, history and condition APK (MOT): tested until 06/2026 Technical condition: good Visual appearance: good

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Hjdpfx Asyhxkmegwsfd Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven