Used Deckel Maho Dmu 200 P for sale (326)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar Cpedovyr Tdepfx Ag Ret >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: good (used), Year of construction: 2004, operating hours: 64,500 h, functionality: fully functional, machine/vehicle number: 1505709006, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, Machine in good condition, measurement protocol available TECHNICAL DETAILS Travel X: 750 mm Travel Y: 600 mm Travel Z: 520 mm Table Cpjdpewrz Nwjfx Ag Rjt Clamping surface: Ø 700 × 500 mm Central/max table load: 350 kg NC rotary-swivel table: 700 × 500 mm B-axis: 180° C-axis: 360° Spindle Spindle speed: 42,000 rpm Tool holder: HSK E50 Spindle cooler: available Control CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: available Preparation for 3D probe HEIDENHAIN TS 641: without probe BA: 4 Tool management Tool changer: 60 positions Speed Rapid traverse: 50 m/min MACHINE DETAILS Machine dimensions (L × W × H): 3,200 × 2,650 × 2,800 mm Machine weight: 9 t Total power requirement: 50 kVA Power supply: 400 V Operating times Power-on hours: 141,300 h Spindle hours: 64,500 h Control on time: 146,100 h EQUIPMENT - 5-axis simultaneous HSC machining center - NC rotary-swivel table with B and C axes - Chip conveyor present - Electronic handwheel for manual operation - Laser for tool measurement - Prepared for 3D probe HEIDENHAIN TS 641 - Oil mist extraction integrated - Spindle cooling available - No internal coolant (IKZ) available

Condition: good (used), Year of construction: 1999, operating hours: 52,964 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Control: Heidenhain MillPlus Table Table length: 1,100 mm Table width: 650 mm Table load: max. 800 kg Feed rate X-axis: 20,000 mm/min Y-axis: 20,000 mm/min Z-axis: 20,000 mm/min Spindle Spindle mount: 40 ISO / BT / MK Spindle power: 15 kW Speed: max. 12,000 rpm Tool changer Number of tools: 24 Number of controlled axes: 3 MACHINE DETAILS Length: 3,400 mm Width: 2,400 mm Height: 2,800 mm Weight: 8,700 kg Cpjdpewnbqgofx Ag Rst EQUIPMENT - 4th axis - Chip conveyor - Coolant system - Control cabinet

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm Cjdpfx Agewlvi Ee Rjpt tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: excellent (used), Year of construction: 2002, Contouring control : Heidenhain TNC 310 Accessories available Working range X-way 500 mm Y-way 400 mm Z-way 400 mm Main drive Speed continuously programmable 20 - 4'500 rpm. tool holder SK 40 Work table Drive B/C-axis Manual Clamping surface ø 700 x 500 mm Groove distance/size 63/14H7 mm Codpfxsp H S Uxo Ag Rjpt Rotation range 360 Swivel range + 95 / - 10 Dimensions Length 1800 (750 control) mm depth 1800 mm Machine weight 2600 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 11025512744, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 Tool holder: SK 40 Speeds: 20-4,500 rpm Cpsdpfewr D Ehox Ag Rot MACHINE DETAILS Machine weight: approx. 3,000 kg Space requirement: approx. 2.15 x 2.00 x 2.50 m EQUIPMENT - Swivel rotary table - Documentation

Condition: excellent (used), Year of construction: 2004, operating hours: 8,725 h, functionality: fully functional, Deckel Maho DMU 50 EVO with iTNC 530 About the machine: Only 2,684 spindle hours! Like new condition! All hoses (pneumatic, coolant, cooling) have been replaced. The machine has been completely cleaned. The machine has been checked and measured. A geometry inspection report has been issued. Geometry is excellent. Top specifications! - Control system: Heidenhain iTNC 530 - Travel path X-, Y-, Z-axis: 500/420/380 mm - Rapid traverse: 50 m/min - Spindle speed: 20–18,000 rpm - Tool holder: SK40 DIN 69871 - Tool magazine with 32 slots Cpjdpfx Ajxf Ud Sog Rot - Machine weight approx. 6,500 kg - Chip conveyor - Internal coolant supply 40 bar with belt filter (rotary union NEW) - Rinse gun - Coolant/air blast switching (M25) - Heidenhain TS 640 probe - Renishaw tool probe NEW (automatically retracts) - Kinematics Qickset - Network connectivity - Automation interface available Viewing and testing under power on site is, of course, possible. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: good (used), Year of construction: 2001, MACHINE SPECIFICATIONS Control: HEIDENHAIN Machining area: X axis: 500 mm Y axis: 420 mm Z axis: 380 mm Main drive: Speed range: 20 – 18,000 rpm Power (40/100% ED): 35/25 kW Torque (40/100% ED): 130/87 Nm Feeds: Working feeds (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum weight on table: 200 Kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (resol. 0.001º) B-axis travel: 180º (resol. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2.470 mm Machine weight: 5.020 Kg Taper: Taper type: SK 40 (DIN 69871 A) Cjdpexq Hb Tofx Ag Rspt Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Cooling fluid through the chuck Automatic tool changer: ATC-32 - Maximum tool weight / Maximum tool diameter: 6 Kg / 200 mm Chip evacuator Electronic handwheel: HR-410 High capacity cooling system: Interlit SUK-200-900 Equipped with Reninshaw probe interface: probe included

Condition: ready for operation (used), Year of construction: 1996, operating hours: 24,128 h, functionality: fully functional, travel distance X-axis: 530 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain Millplus Speed: 8,000 rpm Power: 15 kW Torque: 130 Nm Tool holder: SK40 NC swivel rotary table B-axis: 180°, 16 rpm C-axis: 360°, 18 rpm Clamping surface: Ø500 × 380 mm Table load (max.): 200 kg T-slot spacing / size: 63 / 14 H7 mm Center hole: Ø30 H7 mm Max. torque (rotary axis): 1,000 Nm Max. table top rotation (rotary axis): 18 rpm Max. swivel torque: 1,100 Nm Swivel speed: 16 rpm Movement and position measurement Rapid traverse in X/Y/Z axis: 30 m/min Displacement measuring system: Direct in X/Y/Z (glass scales) Tool magazine Tool magazine: 24-station Max. tool length from spindle nose: 280 mm Max. tool weight with automatic Tool change: 6 kg Max. total tool weight in the magazine: 80 kg Required compressed air: approx. 5.5 - 8.0 bar Compressed air consumption: approx. 7 m³/h Chip management Chip management: Chip tray Cedev Tp Dmspfx Ag Ropt MACHINE DETAILS On-time: 58,886 h Spindle time: 24,128 h Weight: 4,400 kg Installation dimensions: 5.2 x 4.0 x 3.1 m (without peripherals) Transport data: 2.45 x 1.76 x 3.38 m, 3.5 t The zero-point plate on the work table is not included in the scope of delivery.

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min Csdpfxotqqmbo Ag Ropt table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Cpodslbmtnopfx Ag Rjt

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, controller manufacturer: Heidenhain, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Codpfxew N Im As Ag Rept Travel paths X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm C-axis: 360° manual B-axis: +105° / -15° manual MACHINE DETAILS Control: Heidenhain

Condition: reconditioned (used), Year of construction: 2008, Partially overhauled milling machine Axes: 5 Control: Siemens 840 Solutionline Cpedov Acgyspfx Ag Rot Spindle: SK 40 / 18,000 rpm Equipment: 3D Quick Set for kinematic measurement, Heidenhain 3D measuring probe Handwheel Internal cooling system 40 bar Chip tray (no chip conveyor)

Condition: used, Year of construction: 2004, functionality: fully functional, We offer you: Machining Center - universal Manufacturer: Deckel Maho Type: DMU 80 T Cedpfx Agjvx Tido Rjpt Year of manufacture: 2004 Control: Heidenhain MillPlus Technical Data: x-axis: 880 mm y-axis: 630 mm z-axis: 630 mm Max. spindle speed: 12,000 rpm Table size: 1,250 x 700/ ⌀ 800 mm Max. table load: 700/ 500 kg Center drilling: ⌀ 50 mm Tool holder: SK40 Tool changer: 32 (2x16) positions Max. tool diameter: 130/ 80 mm Max. tool length: 250 mm Max. tool weight: 8 kg Feed rate (x/y/z): 20 - 15,000 mm/min Rapid traverse (x/y/z): 30 m/min Machine weight: approx. 10 t Operating hours: approx. 92,738 h Spindle hours: approx. 16,096 h Technical Features: - ICS (internal coolant supply) Accessories: - Chip conveyor - Measuring probe Accessories, depicted tools, and clamping devices are only included in the delivery if mentioned in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Rotary table: NC rotary table diameter 450 mm Cpedju Ra I Iepfx Ag Ret Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Tool changing device Chip conveyor 3D path control

Condition: ready for operation (used), Vertical machining center, travels: X mm630, Y mm560, Z mm560, spindle attachment SK 40, 20-position tool magazine, table mm1000x600 Cpodpswf U Ndofx Ag Ret cnc Heidenhain TNC426

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Cpsdpfx Agsw Tc Nys Rst

Condition: used, Deckel Maho DMU 70 eVolution Cpodpfx Aow Rtd Aog Rst

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 710 mm Cpedpfxswqgrhs Ag Rst Travel Y-axis: 520 mm Travel Z-axis: 520 mm Number of machining axes: 5 Simultaneous CNC axes: 3 Clamping area table: 700 mm Workpiece weight: 350 kg Tool holder: HSK A63 Drive power S1 100%: 15 kW Max spindle speed: 18,000 rpm Spindle type: vertical Max tool diameter: 40 mm Magazine type: chain magazine Number of tool positions: 32 MACHINE DETAILS Overall height: 2,760 mm Overall weight: 6,000 kg Required length: 2,710 mm Required width: 2,750 mm Connected load: 32 kVA Spindle hours: 27,000 h Operating hours: 83,450 h EQUIPMENT - Coolant system - Fully enclosed working area - CE compliant

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Cpedpfxew Ngk Hs Ag Rst Tool changer for 60 tools Automatic head 180/-7° stepless

Condition: excellent (used), Year of construction: 2007, operating hours: 1,380 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (max.): 108 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Speed range: 18,000 rpm Tool holder: HSK-63-A Tool positions: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Csdjwu Evtjpfx Ag Rspt MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary tilting table - Internal cooling (IKZ) prepared for 40 bar - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Condition: ready for operation (used), Year of construction: 2001, operating hours: 17,362 h, functionality: fully functional, machine/vehicle number: 15035703814, travel distance X-axis: 750 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain 426, spindle speed (max.): 18,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Cpsdpfx Aov R Ez Neg Ret C-axis: available B-axis: available Controls Control: Heidenhain 426 Handwheel: Heidenhain HR410 Table Table size: 700 x 500 mm Max. table load: 350 kg Spindle Speed range: 20 - 18,000 rpm Tool holder: SK40 Tool capacity: 32 tools Feed rate & capacity Rapid traverse: 20,000 mm/min MACHINE DETAILS Connected load: 50 kVA On-time: 75,856 h Program runtime: 17,363 h EQUIPMENT - Rotating B and C axes - Coolant tank with Pump - various tools

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool holder: SK40, feed X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot spacing: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control: MillPlus. Documentation available. On-site inspection is possible. Codpfx Ageu T Rils Rjpt

Year of construction: 2000, condition: excellent (used), Controll HeidenHain 3D 430 Spindle Taper SK 40 Power on spindle13 kW CNC Automatic milling head / Gr.-91 to + 12 Grad X – Travel 630 mm Y – Travel 560 mm Z – Travel 560 mm Table Length x Width 1000 x 600 mm Table load 500 Kg Cjdpfx Agjgqbp Ue Ropt Number off controlled axis 4 ATC tool changer 20 Spindle speeds / ranges 18000 Rpm

Condition: used, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller manufacturer: Heidenhain, total height: 2,500 mm, total length: 4,000 mm, total width: 2,200 mm, table load: 200 kg, overall weight: 3,500 kg, Brand: Deckel Maho Model: DMU 50T Serial Nr: 500051 Controller: Heidenhain Table Dimensions: 500x700 Max Weight Table: 200 Kg Machine Course: X: 500mm Y: 400mm Z: 400mm Spindle: Rotation: 9000 mm/min Cone: SK 40 Cpjdpfsw D Hafox Ag Rst Carriage: 16 Positions Fast advances: X, Y, Z: 12 m/min Machine Dimensions: 4000 x 2200 x 2500 mm Machine Weight: 3500 Kg