Used Deckel Maho Dmu 50 for sale (334)

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: Dujdpfx Asxxamxogfor X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: Dujdpfx Aox Tapfogfsr SK40 DIN 2079 Draw bolt DIN 69 872 Tool changer: 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, Control Unit Brand HEIDENHAIN Model Mill Plus Main Drive Spindle speed range 18000 Number of axis 3 Movement X-Axis Movement 880 mm Duedpfx Asx D Iunsgfsr Y-Axis Movement 630 mm Z-Axis Movement 630 mm Tools Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2003, DECKEL MAHO - DMU 125P HI-DYN - 2003 - 3+2 axis - system heidenhain TNC530 Duedpfxoyulc So Agfor - moves X/Y/Z=1250/880/800 mm - C and B axis - rotary table 1250x1000 mm - table load 2000 kg - spindle RPM 20-18000 - spindle motor 28 kW - spindle running hours 29217 - weight 7500 kg

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor Dedpfxoyrir Ss Agfour

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430M, This 4-axis DECKEL MAHO DMU 60 T was manufactured in 2001. It features a Heidenhain TNC 426/430M control, a working area of 630x530x630 mm, and a spindle speed of 12,000 rpm. The swivel B axis can rotate 180 degrees, and it includes two tool magazines with 12 positions each. Consider the opportunity to buy this DECKEL MAHO DMU 60 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Dsdpfx Aoyaqdxjgfsur Technical Machine Benefits • Milling time: 29633 hours/ machine on time: 79606 hours • Swivel b axis: 180 degrees • Two tool magazines with 12 positions each / laser tool measurement for length and diameter "blum" • Spindle speed: 12000 rpm • Working area dimensions: 630x530x630 mm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information. Dsdpoyair Iofx Agfeur Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Dsdsx T Dgnepfx Agfsur Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Dujdpfx Ageymcvmefer Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: 426m, number of axes: 3, This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Additional equipment Dodpfxox D E Ewo Agfeur • Vise • Angle table • Various mounts • Royal presetting device Machine Benefits Technical Machine Benefits • Installation dimensions: approximately 2000 mm x 3000 mm • In 2013, axes overhauled and spindle ground • Linear guide y-axis (replaced) • Cylindrical head screw m. Inskt. (replaced) • Ball screw drive y-axis (replaced) • Axial angular contact ball bearing zklf 3080 2rs (replaced) • Spindle cone (reground by external company) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V Dedpfjx D Nalsx Agfsur • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Duedpfx Aox D Nwkogfer Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Dujdpfx Agoyk S Hpofor Year of manufacture: 2001

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Duedpjyq Rpcefx Agfsr Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Duodpfx Agsyq Rm Iofor Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Dsdpfx Asym Nb Asgfsur Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Dodpfx Agsu Hf Rysfour Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Dodpfex Dlf Rsx Agfjur Handwheel Heidenhain TS 642 probe

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Dusdpfx Aeym Rnkegfjr Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Dedpjym Sdysfx Agfjur Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) Dedpfjvt D D Usx Agfour - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock Dedpfxjxn Aczs Agfeur With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Spindle: replaced on 14.11.2018, approx. 17,000 hours Technical data: Travel paths: Dusdpfx Aeylk Sysgfjr X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Coolant system: available

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Duodpfxsw I R I He Agfor For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, For sale is a 5-axis machining center from Deckel Maho, type DMU 35 M, with two manual rotary axes. The machine is in very good, immediately operational condition and, due to its compact size, is particularly space-saving. Technical specifications: Year of manufacture: 1999 Control system: Siemens 840D ShopMill X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Feed rate: Continuous up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y, and Z axes Clamping surface: Ø 400 x 280 mm Rotation range: 360° (mechanical) Dsdpfewal Aqex Agfsur Table clamping: +105°/-150° (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamps: pneumatic/mechanical Space requirement: 3,800 x 3,600 x 2,100 Transport dimensions: approx. 2,000 x 1,700 x 2,100 Weight: 1,600 kg Electronic handwheel, chip tray Tool holders and vices are not included in the offer; these can be offered separately if required. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website