Used Deckel Maho Dmu 50 for sale (318)

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm workpiece weight 200 kg total power requirement 17,00 kW Kdjdpfsw Tm R Uex Aadew weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door. Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Ksdpfx Aewl R Dqoadjdw Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Kodpfsvtnm Hjx Aadedw Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: Kjdpfjv Sy Sfex Aadodw - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, DECKEL MAHO DMU 80P General Data Measurements width 3400 mm Measurements depth 2200 mm Measurements height 2400 mm Machine weight 12000 kg Main Drive Kedpjvbg Sqjfx Aadsdw Number of spindles 1 Spindle speed range 18000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 5 Movement Unfpvoddib X-Axis Movement 800 mm Y-Axis Movement 700 mm Z-Axis Movement 600 mm Table Outer length 800 mm Outer width 700 mm C-axe (table) simultaneous 0-360° B-axe swivel head two position vertical or horizontal (not simultaneous) Machine have new spindle was replaced in 2019. we include 30 tools sk40 Application Types Milling

Condition: used, Universal Machining Center Machine type: DMG Deckel Maho DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2500 x 2000 mm Top table: 2800 mm diameter Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun Kdedpfx Aaswa Aihodsw

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Kdedpfx Aexwlgzjadsw Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, DMG UNIVERSAL MACHINE CENTER DMU80P hi-Dyn Year 2001 X800 Y700 Z 600mm Heidenhain iTNC530 NC Rotary Table Ø900x630mm Kdodpfxew A Dy To Aadow NC B axis Milling Head Spindle 18,000rpm ATC 180 – HSK-A63 Roto Clear window Spindle thru' coolant 40 bar Selling Cheap Cheap sales - 50.000,00 USD

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus Kdsdpfjxqrh Ejx Aadjw weight of the machine ca. 12,5 t

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Kdsdpfx Aaew E Rnpjdsw Milling

Condition: reconditioned (used), Year of construction: 2004, With MILL PLUS iT CNC control Year of manufacture: 2004 Travel distances: X 1000 Y 1000 Z 1000 mm Speed range: 0 – 8,000 rpm stepless (SK 50) Including the following accessories: - NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Kdsdpfsxn Aibjx Aadsw - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine slots, double gripper (SK 50) - Fully enclosed safety cabin with sliding doors and interior lighting - Coolant high-pressure system – 40 bar - Chip conveyor - Rotoclear - 3D probing system Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - Chip-blowing pistol - 50 tool holders SK 50 - 3 height-adjustable machine mounts - Transport device - Operating manuals

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm NC-rotary table ø 900 x 630 mm Kedpfx Aasw Eyhfodsdw spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration

Condition: used, Year of construction: 2002, x-travel 1100 mm y-travel 710 mm z-travel 710 mm Control Heidenhain iTNC 530 Number of working hours ca. 79.360 h spindle hours ca. 34.555 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Kjdpjxgicfefx Aadjdw Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Ksdpfx Aasxvw Hqsdodw Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2012, operating hours: 51,149 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 600 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, spindle speed (min.): 18,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 120, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Pallet changer including 2 pallets 630x630 Control: Siemens 840D HSK63 spindle, 18,000 rpm Tool magazine for 120 tools Measuring probe: Heidenhain 3D quickSET preparation Four-color signal light Blow air through spindle center Scraper belt chip conveyor with slotted screen Internal coolant supply with 980L tank Rinsing gun for chip flushing Kjdpjxv Ak Usfx Aadedw Operating mode 4 C-axis: direct drive, integrated balancing system Extended chip flushing Swiveling tool laser measurement Operating hours: 51,149h, spindle hours: 26,121h Spindle NEW from Kessler including measurement protocol Viewing windows NEW, bellows NEW OPTION Milling / Turning package NC rotary milling table, C-axis with direct drive and integrated balancing system Motor spindle 20-18,000 rpm Power: 35/25 kW (40/100% duty cycle) Tool holder HSK-A63 Spindle clamping for turning mode Reinforced cabin version for FD 3D probe for turning tools Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert assembly – all from a single source. Billing based on individual terms and contract period. Contact us for your personal offer.

Condition: used, Year of construction: 2008, x-travel 750 mm y-travel 600 mm z-travel 520 mm tool taper SK40 control i-TNC 530 weight of the machine ca. ca. 9 t DMGDMU 70 Built in 2008 5-axis universal milling machine DMU 70 Travel range X/Y/Z 750/600/520 mm 24 m/min rapid traverse Spindle speed 14,000 rpm Tool holder SK 40 according to DIN 69871 Tool changer 30 magazine slotsTool measurement Kdsdpfx Asxv Ealjadew Blum laserInfrared probe Heidenhain TS 640 Control Heidenhain iTNC 530

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: Ksdpfexn Aczsx Aadedw - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm Kdjdotqqmhspfx Aadsw z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3500 mm Measurements depth 3000 mm Kdodpfx Aajxuw D Hsdjw Measurements height 2500 mm Main Drive Spindle speed range 18000 Tool taper HSK-63A Number of axis 4 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 26,000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 26,000 mm/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 20,000 mm/min Table Table load 400 kg Tools Number of index 20 This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. Application Types Milling

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Kdjdsxvrbiopfx Aadew Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: ready for operation (used), Year of construction: 2000, Available immediately from Swiss toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Ksdpfexxuyajx Aadsdw Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Travels X/Y/Z: 350/240/340 mm Infinitely variable spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servo drives for X/Y/Z axes Rotation range: 360 degrees Table clamping plus 105° / minus 150° Weight: 2 tons Includes holders, hydraulic vice Price: EUR 5,500 plus VAT ex location.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Kodpfx Aasxtmpiododw Stock number: 1039-8700 Machine type: Vertical Machining Centre Manufacturer: DECKEL MAHO Model: DMU 125 T Year of manufacture: 1998 Control: Heidenhain TNC 426 Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex-site Additional information: CNC Vertical Machining Centre DECKEL MAHO - DMU 125 T - ICS (internal coolant supply) WE OFFER YOU: • Workshop-inspected machines • Free loaded onto truck • NO auction fees • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details Travel paths: X-axis travel: 1,250 mm y-axis travel: 880 mm z-axis travel: 800 mm Control: Heidenhain TNC 426 Main spindle: • Spindle speed range: max. 12,000 rpm • Main spindle drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Worktable: • Clamping surface: 1,500 x 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool changer: • Number of tool pockets: 30 positions • Max. tool diameter: 80 mm • Max. tool diameter with adjacent pockets empty: 160 mm • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total tool weight: 100 kg Feed rates: • Rapid traverse (X / Y / Z): 15 m/min • Feed rate: 10,000 mm/min Total power consumption: 29 kW Machine weight approx.: 16.0 t Space requirements approx.: 7.0 x 5.0 x 3.3 m Accessories • Documentation • Chip conveyor • Coolant system • High-pressure cooling • Internal coolant supply • Tool changer • Touch probe (Heidenhain) • Electronic handwheel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, Control Unit Brand HEIDENHAIN Model Mill Plus Main Drive Spindle speed range 18000 Number of axis 3 Kdjdpfsxulb Hjx Aadew Movement X-Axis Movement 880 mm Y-Axis Movement 630 mm Z-Axis Movement 630 mm Tools Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800 Kdsdpsxur Sxjfx Aadjw

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, Control Unit Brand DECKEL MAHO Model Millplus V400 Main Drive Number of axis 3 This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Application Types Milling Kdedjxr Rztspfx Aadjw