Used Dedusting for sale (181)

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Guodpfx Ajx A Exush Dsk Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: excellent (used), System is like a new, very high quality. Including: 5 inch tube 31m, 4 inch tube 40m and 3 inch tube 41m Lot of standard radius elbows for these 3 diameters, standard 90 degree ty's, standard reducing couplings, compression couplings, threaded inlet valves etc. Gsdpfxex Anthj Ah Douk

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details Gjdpfxohk Dfrj Ah Djuk With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. Godpfxexzup Tj Ah Dsuk THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, Gsdpfxsvfxqys Ah Douk 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow Godswanf Uspfx Ah Djuk 2,100 Pa negative pressure, 65 dB, H3 certified 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, COMPLETE AUTOMATIC EPS-POLYSTYRENE PRODUCTION LINE (5 trucks/550 m3/12 hours) General information: Guedpovlw R Esfx Ah Djk Capacity: 5 trucks – 550 m3 / 12 hours Manufacturer: Made in Germany – Goettex GmbH Complete EPS production line for white and graphite material Includes all spare parts and accessories as well as pipework. Includes: - Block mould (transport carriage with chain conveyor, fully automatic cycle, touch panel, insulated, vacuum system) 2.67 m3, Height: 2080 mm – Width: 1270 mm – Depth: 1070 mm - Steam tank 5 m3 with parts - Working (loader) silo 1 for white material, automatic level control - Working (loader) silo 2 for gray material, automatic level control - Silo system with fully automatic level control (7 units) 86 m3 × 7 pcs, Height: 6000 mm with cone, Width: 4000 mm, Depth: 4000 mm - Pre-expander 1, capacity 1.1 ton/hour - Pre-expander 2, capacity 1.1 ton/hour - Mixing station 1 for white material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Mixing station 2 for gray material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Air tank (200 liters) - Octabin container holder (for 1 Octabin or 1 Big-Bag) - Cutting line with automatic wire adjustment, Complete line consists of 3 sections: 1) Block Start table 2) Vertical section 3) Horizontal section, with automatic wire adjustment, with EPS recycling grinder - Packing machine with ink printer, Cycle time: 12 sec/package, Film feed via 2 rolls up to 350 m3 – with Touch panel – Ink printer with 2 colors - Dedusting unit 1 for white recycling, connected to the grinder with powder flowing into the sack - Dedusting unit 2 for gray recycling, connected to the grinder with powder flowing into the sack - Compressor for all machines - Cooling tower for vacuum system All PLC and frequency inverters are SEW and Toshiba. With full pipe system. All fans and electric motors are integrated with frequency inverters and SEW gearboxes. The complete production line includes the processing of both white and graphite raw materials. Full software support and spare parts supply available. Relocation of the complete technology to the customer's site is performed by a professional company. After transport and assembly, full system commissioning and training are included in the price. 5-10 working days for 2 persons.

Condition: new, Year of construction: 2025, We offer you: Paint wall TPW1515 Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. Gjdpsg Sikrofx Ah Djuk We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Guedpfx Aecdy I Tsh Dsk Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: used, functionality: fully functional, Year of construction: 1991, Ammann MEA 160/240 asphalt mixing plant Base year 1991 Mixing tower complete Screening machine fully refurbished in 2024 -Drying drum with burner, year 2011 -Dedusting/filter unit Ammann, exhaustor, chimney, year 2011 Gusdoxyu A Rspfx Ah Dsk -4 x bitumen tanks with thermal heating/pumps -RC addition -Elevated RC addition with drum -Discharge silo Ulrich -Ammann control system, year 2024

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume Guodpfxeff Sbio Ah Dok *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY Gsdpfx Ajvzqtxoh Djuk 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: new, Year of construction: 2025, TM2015 spray booth Working dimensions (mm): 2000 (w) x 1500 (h) x 450 (d) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1,5 kW fan power, • Capacity 7600 m³/h, • 950 Pa compression, • Right or left side discharge, Gjdpfx Asd S N S Hoh Dsuk • 3 stage air filtration, • The degree of filtration at the level of 98%, • Explosion-proof Ex fan, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2007, Used Al-ko clean air dust extractor, Intake nozzle: 160 mm Motor rated power: 2.2 kW / 3-phase Voltage: 400 V / 50 Hz Nominal air volume flow: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 litres Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Guedpfxew Aptls Ah Dsk Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale Gedpfxscdrzde Ah Douk

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz max. volume flow: 4900 m³ / h Gujdpfxjcdr Ene Ah Dek Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Gujdpfx Ajhkzt Nsh Dsk Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Gedpfjcdy I Rsx Ah Deuk Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Guedpfx Aecnw T Ijh Dsk For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: excellent (used), Year of construction: 2016, Technical data POWER UNIT 200 P used - Excellent condition - • Inlet diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. air flow: 3010 m³/h • Rated air flow: 2262 m³/h • Vacuum: 2174 Pa • Filter surface area: 13.7 m² • Filter cleaning: compressed air cleaning Gjdpfsw Tqndjx Ah Deuk • 2 discharge containers (roll containers): each 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version: left Location: Ex-stock Bitburg - Immediately available -

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Gjdpfx Aov Sk Tmeh Douk Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: good (used), Year of construction: 2000, Gebr. Esta Dustomat 62 Suction nozzle Ø: 160 mm Main motor: 3 kW Guedpsvk Drtjfx Ah Dek Item description: mobile, CE mark, 3 KW, Ø=160 mm, Filter cleaning mobile separation container, Nominal volume flow 1,850 m³ / h Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Gjdow T U Uzjpfx Ah Djuk Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Gedpfx Aohkzttjh Djuk Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Gedpfx Ahebuvbre Douk Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg