Used Demag 500 for sale (502)

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm Gbodpfx Aajxc Eiysbeu -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Condition: used, Year of construction: 1991, operating hours: 35,498 h, functionality: fully functional, Equipment: documentation/manual, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume (70mm): 960 cm³ / 860 g Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2x Gsdpfx Asxk Tk Ijabjbu Air valve: 1x Robot interface Equipment 2-circuit core pull / 2-circuit robot interface 5/2 air valve No.1 on moving platen Clamping force control Handling interface, Euromap 12 (32-pin) robot interface Tool protection interface (ejector plate safety) Integrated hot runner control, 2 zones Mould protection Electrical plug combination

Condition: good (used), Year of construction: 2006, functionality: fully functional, clamping force: 2,000 kN, Demag Ergotech Extra 200-600 Plastic Injection Moulding Machine Type: Extra 200-600 Year: 2006 Screw diameter: 45 mm Injection pressure: 1910 bar Shot weight (PS): 291 g Nozzle contact force: 60 kN Clamping force: 2,000 kN Holding force: 2,200 kN Max. opening stroke: 575 mm Mould mounting platens: 860 x 860 mm Max. mould weight: 2,500 kg Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN Gjdpfx Asw H Sw Hsabjbu The machine is in very well-maintained original condition. Complete and detailed documentation is available. Inspection under power can be arranged at short notice. For further questions, please do not hesitate to contact us. Price: ex stock here plus VAT Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Subject to prior sale and errors. We look forward to receiving your order. Additional machines and equipment available from stock – please enquire. We look forward to your inquiry.

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Gjdpfewk T Uisx Aabobu Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 2,03,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical Information Number of cylinders: 6 Dimensions Dimensions (L x W): 1,027 x 255 cm Weights Unladen weight: 47,900 kg Payload: 100 kg GVW: 48,000 kg Functional Mast: Articulated boom Mast length: 64 m CE marking: yes Condition Technical condition: very good Visual condition: very good Gjdpfx Aow I A Dmjabjbu Further information Please contact John de Koning for more information.

Condition: used, Electric Chain Hoist Crane DEMAG Type PM 8 - Manulift Serial No.: 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance suspension to load hook: 700 mm Main lifting speed: 12 m/min. Fine lifting speed: 2 m/min. 1 load strand = 80 kg Manulift hand control located directly at the crane hook Gsdpfx Aaexcbnlsbsbu Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Gbodpfepiarnex Aabju Please ask for your crane runway with cantilever capacity and dimensions.

Year of construction: 1992, condition: good (used), Compressor unit consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min 3,000 rpm 45 kW Digital display Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min Pressure: 75 bar 3,000 rpm 45 kW Refrigerated compressed air dryer Manufacturer: MANNESMANN DEMAG Model: AD160AB Gbedpfxori I Rro Aabju Year of manufacture: 1993 Oil-water separator Model: ÖWAMAT 6 Compressed air receiver Manufacturer: LOHENNER Model: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Operating pressure: 11 bar 91025ä

Condition: good (used), Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: Mannesmann Demag, Gearbox Crane Gearbox -Type: AF08-MTranslation ratio: 36.9:1 -Motor: without electric motor (can be supplied at an additional cost) -Input- shaft: Ø 24 x 25 mm Godpfx Aaexb Rkmjbjbu -Output hollow shaft: Ø 41/45 x 155 mm -Dimensions: 210/200/H360 mm -Weight: 33.5 kg

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Godexhfuaspfx Aabebu Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: used, mileage: 2,21,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Gbjdjwwqbyepfx Aabju Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1988, Field of application: Construction Empty weight: 850 kg SC40ES 30kw 7 bar Gbodpfoxh Hadex Aabsu 3.8m³/min Article nr.: W309539001-veiling Used Compressor mobile Mannesman Demag sc40es

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Shot weight: 2,560 g/PS Control: NC 4 Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 Godpfxjxauyco Aabobu - 4 core pulls

Condition: good (used), functionality: fully functional, -KOM 3025- On offer here is a fully functional ABUS gantry crane. Attention: Special feature: Operation on the crane hook. Technical data: Gbsdpou Hzaqsfx Aabeu maximum load: 160 kg Length of the rail: approx. 13,800 mm Width of the rail: approx. 2,800 mm

Condition: ready for operation (used), approx. 43 pieces = 172 running meters Number of conductors / number of poles: 4 Gjdpfx Aasd Hapkobsbu in standard lengths: 4000 mm for mains voltage up to: 500 V Busbar cross section: 10 mm² Weight: 2 kg / m Load capacity at 100% ED: 60 A

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m Gedpovzhhtefx Aabjbu weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), rotational speed (max.): 2,800 rpm, Demag motor GCH140 D2 Condition: new, price on request Gbedpfjxgg S Dox Aabou ED 100% 10.00 kW 31.5 A 2800 rpm 380V 50 Hz Brake: 19 Nm

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Gbsdpfsxc Inxjx Aabju Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Gjdpfow Ulirsx Aabebu

Condition: good (used), functionality: fully functional,

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Gbodpfx Aaed Hurbjbou Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: good (used), Year of construction: 1965, weight max. 250 kg throat 2.500 mm height 3000 mm Base plate 600 x 600 Column-mounted slewing jib crane from DEMAG Gbodpfxovylh Ie Aabeu Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 25,500 h, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580 mm, displacement volume: 442 cm³, injection pressure: 2,100 bar, injection weight: 393 g, overall weight: 11,000 kg, General Data Year of manufacture: 2009 Weight: 11,000 kg Dimensions (L × W × H): 6.7 × 1.7 × 2.2 m Control system: NC5 Operating hours: 25,500 h Clamping Unit Clamping system: 210/... Clamping force: 210 t Platen dimensions (H × V): 855 × 860 mm Tie bar spacing (H × V): 580 × 580 mm Mold height (min.–max.): 340 – 690 mm (max. increased) Opening stroke: 575 mm Maximum daylight: 1265 mm Ejector stroke: 165 mm Ejector force: 60 kN Ejector coupling: mechanical (automatic engagement, manual disengagement) Injection Unit Injection unit type: …/1000 Screw diameter: 50 mm Screw L/D ratio: 20 Injection volume: 442 cm³ Shot weight: 393 g Specific injection pressure: 2,100 bar Wear-resistant screw; bimetallic cylinder; standard L:D Check valve (RSP), 3-piece, ring type Gjdexc Ifwjpfx Aabjbu Additional Equipment Extended maximum mold height (min. unchanged, max. increased) Mold opening and ejector function only with safety guard closed Programmable injection pressure before screw (multi-point curve – 6 support points) Injection, hold pressure, pre-injection pressure, dosing – adjustable Manual pressure relief for 2 hydraulic core circuits on the moving platen (shared valve)

Condition: good (used), functionality: fully functional, -WAG 865 On offer here is a gantry crane with a maximum load capacity of approx. 125 kilograms. Technical data: Manufacturer: Demag Pillars: 4 Max. Load capacity: approx. 125 kg Number of load lines: 1 Total weight: approx. 125 kg Total length: approx. 4900 mm Height: approx. 3500 mm Width: approx. 2200 mm Gjdpfjuzw Uyjx Aabsbu

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, overall weight: 21,000 kg, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Gbjdpfx Aexc Idteabou Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)