Used Demag Faw 1 for sale (506)

Year of construction: 1983, condition: excellent (used), machine/vehicle number: WR10, Technical data: Duedpfxsrt R Hne Afpen 1x Demag KBK 1 pillar jib crane NL 250KG with Demag PK1 chain hoist Payload at full radius 250KG / 0.25 tonne payload Height: approx. 3.3m UK boom: approx. 2.8m Radiance: 2.7m Hook height: approx. 2.4m Complete weight approx. 600KG incl. dowel plate 80x80cm with 250KG Demag chain hoist incl. bolt, cable carrier, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only after appointment

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Dusdpox D Rqrjfx Afpen • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm Dujdjx D Nwqopfx Afpon • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes Dodpfxjvvtx Ts Afpeun

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. Djdpfjw Ixz Ujx Afpeun The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Dujdjwk Aw Hjpfx Afpen Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Dedpex Uqb Ijfx Afpoun Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Dedpfjygk Eiox Afpsun

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolleys, 3.2 t, complete with hoist PLV168 Very good condition, ready for immediate use 1 unit for €3,300.00 net 2 units for €6,200.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Dusdswafidjpfx Afpon Fine gear 72 DFg refurbished or Hoisting motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Year of construction: 1999, condition: good (used), Demag KBK crane sky crane runway dimensions approx 20 x 6 m Payload / lifting load 1000 KG - 1,0to Dujdpfx Afsct Dhyepon Technical data of the plant: Crane runway from Demag CRC2 rails Mounting height variable, chain length about 4 m System comes complete: -KBK Rails, rail connectors -Fahrwerke, End plates, cable chain, holder / hanger etc incl. double bridge with Demag chain hoist 1to Conditioning is not like the pictures seen electrically driven - no travel drives! Picture shows the same facility with 12x6m Shipping preferred possible pickup by freight Demag KBK1 KBK2 and KBK3 rails are in stock! Shipping via forwarding Truck 450 euros net within about 350 Km please inquire Other measurements or shipping prices, we will be immediately and non-binding offer!

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair Dodpfx Afew H S Avopoun End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) Dedpfx Afsxxrr Tepjun - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Height: approx. 2.7m UK boom: approx. 2.6m Dujdpfxjpwgrfo Afpon Projection: approx. 1.40+1.40m = 2.8m Weight completely approx. 300kg Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: excellent (used), Injection molding technology module TX DAIS RX DAIS Duodpsqxdnlsfx Afpjn 2 STK control card Demag

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min Duodpfev N Ib Nsx Afpon rope diameter: 14 mm connected load: 15,5 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Dusdpfx Afovbh Rhjpon Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: used, Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -with: pantograph -with: control switch Dsdpfxjc Rwcxs Afpsun -Dimensions: 660/330/H340 mm -Weight: 41 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 Dusdec Sxqhjpfx Afpjn -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m Djdod A Hgkspfx Afpoun -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Condition: used, Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 Dodpfx Asc Sxqkjfpjun -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm Dujdpfx Afecb E Tropen -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan Djdpsn Hbb Asfx Afpjun -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 Dedpfx Afsn Hbc Ispsun -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD Dujdpsn H Etfefx Afpen -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC Dsdpfx Afen H Etxopeun -Interface modules: 6ES5 306-7LA11 -Digital output: 6ES5 454-7LB11 5 pieces -Digital input: 6ES5 430-7LA11 3 pieces -Subrack: 6ES5 701-2LA12 -Individual components: see photos -Price/sale: complete -Total dimensions: 480/210/H305 mm -Weight: 11.2kg