Used Dial Gauge for sale (2,326)

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V Itodpfx Ajttnuwjnijn -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Condition: good (used), Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction Isdsqpl Rxspfx Anistn -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Condition: used, Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan type R2E133-BH66-25 -Voltage: 230V -Speed: 2800 rpm -Power: 24 W Ijdpsmiqntefx Anistn -Dimensions: 205/70/H185 mm -Weight: 1.2 kg

Condition: good (used), Maximum diameter of saw 400mm Maximum saw projection 133mm Crosscut capacity 90° 340 x 133mm Iedpfjrl Sknsx Anijtn Crosscut capacity 45° 290 x 133mm Height of work table 813mm Motor power 4.5Kw Speed of spindle 3000 RPM Spring return for saw unit DC brake

Condition: used, Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm Itsdpfx Aotxkwponijn -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Iedpfxsx Rt Ezs Aniotn Speed 30–1200 rpm with swiveling table

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display * Itsdpfxev A S Efe Anion

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 base plate 1700 x 700 mm feed 4 m/min Itodpszb Raiefx Anion weight of the machine ca. 1,5 t dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 65 mm arm length 1600 mm workpiece height max. 1600 mm surface area 1800x800 mm turning speeds 18-1800 U/min Feed -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ijdpfxsy Tplvo Anijtn If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 14418, controller model: Elgo, working width: 4,060 mm, sheet thickness (max.): 6 mm, overall weight: 9,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 4,060 mm Back gauge depth: 1,000 mm MACHINE DETAILS Control system: Elgo Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,400 x 1,750 mm Weight: 9,500 kg EQUIPMENT Digital display Itjdpfx Ajz Nit Isnisn Pneumatic sheet support system Safety light curtain Design: Swinging beam Drive type: Hydraulic Control: Conventional Back gauge type: Electric Angle adjustment: Motorized Shear gap adjustment: Motorized Table type: Fixed table CE marking

Condition: used, Year of construction: 1984, radial piston motors oil motor Itsdpohpiiqefx Anion RADIAL-PISTON-MOTOR for dimter DKV 5

Condition: used, Clamping plate with T-slots, made of cast iron Base plate for a radial drilling machine Assembly table, assembly station, base plate for a column-mounted swivel crane Itsdpjh R D Uzjfx Anion Length: 1850 mm Width: 915 mm Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top surface milled parallel to the underside = clamping surface - Milled underside, with ribs that lie flat and provide support - Ideal as a base plate Weight: 1140 kg Good condition

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t Itjdpfofkg H Tsx Anien total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Isdpfxevcrmpj Anistn Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Technical details: x-travel: 100 mm y-travel: 450 mm z-travel: 400 mm tool taper: SK 40 - Ø 22mm machine weight approx.: 138 kg dimensions L x W x H: 0,72 x 0,38 x 0,99 m characteristics: - measuring area longitudinal axis z=400mm, diameter x= Ø 200mm, diameter y = fixed - tool holder for SK 40 / SK 45 / SK 50, rotation area 360°, max. tools Ø 220mm, receptive cylinder Ø 80mm - dial gauge holder combinable for longitudinal path X and transverse path Y accessories: Itjdpfxou N Aprs Anisn - 3 pcs tool tapers SK40 + SK45 + SK50 - 2 used dial gauges The device is on sale as described, on sale as is! *

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Itodpjvv Spkofx Anion Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm Itjdpfjtzkmbex Anisn T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Itodpfour H I Nsx Anijn Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Itedpfsu T Ty Hex Anijn Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm Itjdpeu Et Nbsfx Anion - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: used, Radial fan, KASTRUP Manufacturer's No. 27688/1, Year of manufacture approx. 1985 Airflow rate: approx. 4000 m3/h Intake pipe: Ø 250 mm Exhaust outlet: 400 x 120 mm Iedpfx Anedz Sqwsijtn Motor speed: 1440 rpm Motor power: 5.5 kW Power connection: 380 volts, 50 Hz - Metal housing Space requirement L x W x H: 1100 x 900 x 1220 mm Weight: approx. 150 kg Good condition

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Itodpfx Anjr H Sqyoion Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Itsdpfx Aexcf Hfonijn

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Itedoxcitvspfx Anien Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm table-size 1280 x 500 mm surface area ca. 1250 x 480 mm Iodjwugrcspfx Anietn turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm boring chuck Schnellspannfutter 1-13 weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm