Used Gauge for sale (1,862)

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Bledpfjzycf Tjx Abtsl Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Sold separately.

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 530 ki Multi Gauge-Type 816 000 E3,5.2 - 3 System - 50" - 20 Yarn Bodpfeyaypdox Abtjll 26 units available for this model

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. Bsdpfx Abjzvhx Rstsll INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17.650.001, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Pressing force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: CNC Power: 34 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 pcs. Blsdpfjzxdtcsx Abtsl EQUIPMENT Tools Documentation CE marking CE certificate

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Bsdpfxszyanlj Abtoll Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane system, overhead crane, bridge crane, gantry crane Load capacity / lifting capacity: 3.2t - 3,200 kg Gauge: 13,600 mm, overall dimensions approx. 13,800 mm Year of manufacture: 2000 Bodpfx Abszv Du Ietsll Lifting height: 6 m Overall height from top of crane to hook: approx. 1,050 mm Head beam length with buffer: approx. 2,450 mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire with your postal code. Collection is preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm Bsdpfszv H Anox Abtell With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), Year of construction: 2009, pressure 40.0 t chamfer lenght 1250 mm distance between columns 890 mm work stroke 100 mm dayligth 300 mm column arm 200 mm table width 140 mm Bedpfx Aszyvbhjbtoll ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 90.0 mm/sec tank 63.0 l total power requirement 3.0 kW weight of the machine ca. 2000 kg range L-W-H 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) * incl. digital display for gauge position * movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) * handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred Bedpfx Aszv H Ecobtell

Condition: used, Year of construction: 1985, Altendorf panel saw F 45, Year of manufacture: 1985 Machine number: 85-4-122 Motor: 5.5 kW / 400 Volt Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1250 mm Raising/lowering and tilting up to 45° via handwheel Bjdpjzx R N Dsfx Abtell Spindle speeds: 3, 4, 5 and 6000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Table extension: 800 mm Miter gauge

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Bsdey Ufk Repfx Abtjll Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Bledpfjzx Ergox Abtel Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 520 ki C Multi Gauge-Type 818 000 C E1,5.2, 2 System - 50'' - 12 Yarn) 48 units available for this model Bodpoyaqt Hsfx Abtsll

Condition: used, functionality: fully functional, Digital Height Gauge TRIMOS type TVM 600 Blodpfxozm Swrs Abtol Travel: 600 mm Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Bjdpfx Ajzf Upbobtoll Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Bjdpfszx D Tcsx Abtsll Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: CR2340 89/221260, Demag ELKE bridge crane, overhead crane, crane, crane system, crane runway Payload / lifting capacity: 3.2 - 3200 kg Track gauge: approx. 14,000 mm, overall width: approx. 14,200 mm With floor control and fine positioning Demag PLV168 wire rope hoist, 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1100 mm Head beam length with buffer: approx. 220 cm Bedjzf Uphspfx Abtoll Crane is dismantled and immediately available Good used condition We also have pillar-mounted jib cranes and wall-mounted jib cranes available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Pickup is preferred.

Condition: repair required (used), functionality: limited functionality, Electronic depth gauge. Bsdpfjzgbgcex Abtjll

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Bljdpezgbypsfx Abtjl Load capacity / lifting capacity: 2t - 2000 kg Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: new, functionality: fully functional, working height: 600 mm, Mitutoyo 192-614-10 Digimatic is a high-precision digital height gauge with a rigid double-column design for accurate and stable measurements. It offers a 0–600 mm measuring range, switchable 0.005/0.01 mm resolution and ±0.05 mm accuracy. Equipped with a clear LCD display, fine/coarse adjustment and Digimatic data output. Bledpszulbaofx Abtel New, in original package. Two are available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Bodex Azrdspfx Abtsll Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: good (used), Year of construction: 2011, Well-maintained, used plate shear from Schechtl. Bsdezyirmopfx Abtsll Type: MSC 400 NC Capacity: 4040 x 2.5 mm (aluminum 4 mm, stainless steel 1.5 mm) Electrically adjustable back gauge up to 750 mm with a support table for delivering the cut sheet at the front. The machine was refurbished by Schechtl in 2023.

Condition: good (used), Year of construction: 2011, Well-maintained, used CNC swiveling bending machine by Schechtl. Blodpfx Ajzykyxjbtsl Type: MAE 400 CNC Capacity: 4040 x 2 mm (Aluminum 3 mm, Stainless steel 1.25 mm, Copper 2.5 mm, Zinc 3.5 mm) Electrically adjustable back gauge up to 1000 mm Machine was refurbished by Schechtl in 2023.

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) Bsdpezv S Nmjfx Abtell - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. Bedpfx Aozxxifebtsll *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.