Used Diaphragm Accumulators for sale (516)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Zona Artigianale
6,623 km
Drum chipper
Holzmatic engineering
Call
Year of construction: 2023, condition: as good as new (ex-display), Technical data:
Inlet width mm. 650
Chopping height mm. 300
Output approx. 70 - 80 srm/h wood chips
Chipping length approx. mm. 25 to 30
Nedpfjncd Duox Aqvoct
Infeed rollers piece 4
Rotor flight circle mm. 800
Chipping knife piece 2
counter knife piece 1
Feed motors kW 2x4,0 with cardan shaft
weight approx. 7.000 Kg.
infeed : horizontal
Machine base : steel, gas-shielded welded
Rotor : steel, inert gas welded,
dynamically balanced.
Bearing : Oversized roller bearings.
Bearing housing : steel, flanged housing.
Feed rollers : steel, special toothed.
Chip outlet : underneath the machine.
Machine grate : (sieve) for secondary crushing of
excess lengths.
Hydraulic system consisting of:
Hydraulic pump, diaphragm accumulator,
cylinder, pressure gauge, control valves for
lifting of the upper feed roller.
Feeding by 2 gear motors, direct engagement,
NORD GEAR.
Listing
Zona Artigianale
6,623 km
Drum chipper
Holzmatic engineeringTRH500 3W-L
Call
Year of construction: 2023, condition: new, Chopping height max. mm. 200
Infeed width mm. 500
Infeed rollers piece 3
Rotor flight circle mm. 600
Chopping length approx. mm. 20-30
output - output 16 - 20 rm/h chipping
Chipper blade piece 2
Feed motors kW 2x2,2
Ncsdpencd Azefx Aqvjt
Weight approx. net kg 4100
Inlet : horizontal
machine base : steel, inert gas welded
Rotor : steel, inert gas welded,
dyn. balanced.
Bearing : Oversized roller bearings.
Bearing housing : Steel, flanged housing.
Feed rollers : steel, special toothed.
Chip outlet : underneath the machine.
Machine grate : (sieve) for secondary crushing of
excess lengths.
Drive pulley : Matched to main motor
N=1500 min-1
Hydraulic system : consisting of:
Hydraulic pump, diaphragm accumulator,
cylinder, pressure gauge, control valves for
lifting of the upper feed roller.
Feeding : by 2 gear motors,
Make NORD GEAR
Listing
United Arab Emirates
2,608 km
Shacman F3000 truck tractor
ShacmanF3000
Call
Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 12.00R24*11, axle configuration: 6x4, fuel: diesel, color: white, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional options and accessories =
- Climate control
- Intercoolor
= Remarks =
Cabin type: F300 flat roof sleeper cab
Country of origin: CHINA
Displacement: 11.596cc
Torque: 2000/1000-1400
Gcw: 90 Tons
Nodpfx Aqoy Tyifevoct
Brakes: ABS Service brake: With dual-circuit compressed air brakeParking brake: Power spring brake acting on rear wheel
Steering: LH
Construction: Tractor Head
wheelbase: 3175+1400 mm
Air driver seat
Hydraulic cab suspension
Reverse buzzer
Manual cab titling
Manual rear view mirror
Steel bumper
Oil pan protection grid
Fuel anti-theft system
Battery anti-theft system
Extra fuel filter
Front and rear light protection
Extra Fuel Filter
Oil Bath filter
Power Window
Clutch Type: 430 diaphragm-spring type
Front axle: HANDE MAN 9500kg
Rear axle: "HANDE MAN16000kg*2
hub reduction axle with inter-wheel differential and different lock
Rear axle ratio: 4.767
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 850x300(8+7)
double plate chassis frame
Fifth wheel: 90 #
Brake with ABS
= More information =
Tyre size: 12.00R24*11
Suspension: leaf suspension
Number of cylinders: 6
Engine capacity: 11.596 cc
Empty weight: 9.500 kg

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
United Arab Emirates
2,608 km
Shacman X3000 truck tractor
ShacmanX3000
Call
Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 6x6, fuel: diesel, fuel tank capacity: 1,000 l, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,500 mm, total width: 2,600 mm, total height: 3,700 mm, Year of construction: 2026, Equipment: air conditioning, = Additional options and accessories =
- 2 fuel tanks
- Sun visor
= Remarks =
Cabin type: flat roof with single sleeping bunk
Country of origin: CHINA
Displacement: 12,500cc
Torque: 2400/900-1400
Gcw: 100 Tons
Dimension: 7,500 x 2,600 x 3,700
Brakes: Service brake: With dual-circuit compressed air brake , Parking brake: Power spring brake acting on rear wheel
Steering: LH
Ncedpfx Aey Tyh Usqvjt
Construction: Tractor Head
wheelbase: 3,775+1,400 mm
The total volume of the fuel tank: 700+300L
Air Driver Seat
Electrical cab tilting
Reverse Buzzer
Central Locker
Hydraulic Cab Suspension
Electric rear view mirror
Day Time Running Light
Dessert Air Filter
Metal Bumper
Rear and Front Lamps Protection Grid
Radiator Protection
Oil Pan Protection
Fuel Anti-Theft System
Battery Anti- Theft System
Extra Fuel Filter
2 Hazard warning light on top of the cabin
ABS: WABCO ABS
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 800x300(8+7)
Gears: 16 forwards & 2 reserve shifts
Clutch Type: 430 diaphragm-spring type
Transfer Case: ZQC 2800
Front axle: HANDE MAN 9000 kg
Rear axle: HANDE MAN16000 kg*2
hub reduction axle with inter-wheel differential and different lock
Rear axle ratio: 4.769 5.262
Brake system type: Drum brake
Exhaust Type: Vertical exhaust
Fifth wheel: JOST 90 #
= More information =
Tyre size: 14.00R20
Suspension: leaf suspension
Number of cylinders: 6
Engine capacity: 12.500 cc
GVW: 10.500 kg
Engine type: Suzuki M13
Number of berths: 1
Volume first fuel tank: 700 l
Volume second fuel tank: 300 l
Listing
United Arab Emirates
2,608 km
Chassis cab
ShacmanL3000
Call
Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, tire size: 295/80R22.5*7, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, emission class: euro2, suspension: steel, total length: 9,700 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2025, Equipment: ABS, power assisted steering, = Additional options and accessories =
- Daytime running light
- Hydraulic power steering
= Remarks =
Ncsdpjy Tyfgefx Aqvjt
Country of origin: China
Displacement: 6,750cc
Torque: 1600/1200-1600
Dimension: 9,700 x 2,500x 3,300
Brakes: Drum + ABS + With dual-circuit compressed air brake + Power spring brake acting on rear wheel
Construction: Chassis
wheelbase: 5700 + 2600 mm
Gearbox type: FAST 8JS85TM + PTO
2kg Fire Extinguisher
Hydraulic driver seat
Electric A/C Windows Curtains
Reverse Buzzer
Manual Cab Tilting
LED daytime
Running Lamps
L3000 Bumper
Oil Pan Protection
Fuel Lamps Protection
Extra Fuel Filter
Warning Triangle
Fuel Anti-theft System
Battery Anti-theft system
Gears: 8 forwards & 2 reserve shifts
Clutch Type: 395 diaphragm-spring type
Front axle: HANDE MAN 4800kg
Rear axle: HANDE MAN 15,150kg
Single reduction axle
Rear axel ratio:4.625
Brake system type: Drum
Service brake: With dual-circuit compressed air brake
Parking brake: Power spring brake acting on rear wheel
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 850x250(7+4)
Double plates chassis frame
= More information =
Tyre size: 295/80R22.5*7
Brakes: drum brakes
Suspension: leaf suspension
Number of cylinders: 6
Engine capacity: 6.750 cc
Empty weight: 6.500 kg
Carrying capacity: 13.500 kg
GVW: 20.000 kg
Engine type: in-line
Discover more used machines
Listing
United Arab Emirates
2,608 km
Chassis cab
ShacmanF3000
Call
Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 12.00R24*11, axle configuration: 6x4, fuel: diesel, fuel tank capacity: 400 l, emission class: euro2, Year of construction: 2025, Equipment: ABS, air conditioning, Cabin type: SHACMAN F300 flat roof sleeper cab
Country of origin: China
Displacement: 11,596cc
Torque: 2000/1000-1400
Dimension: 10,500 x 2,550 x 3,300
Brakes: ABS Brake system type: Drum brake Service brake: With dual-circuit compressed air brake Parking brake: Power spring brake acting on rear wheel
Cab to end: 7,500
Steering: LH
Construction: Chassis
wheelbase: 4575+1400 mm
Gearbox type: FAST 12JSD200T-B PTO
Hydraulic driver seat
Hydraulic cab suspension
Reverse buzzer
Manual cab titling
Manual rear view mirror
Metal bumper
Oil pan protection
Fuel anti-theft system
Battery anti-theft system
Extra fuel filter
Front and rear light protection
Gears: 12 forwards & 2 reserve shifts
Max Input Torque (N.m): 2000
Clutch Type: 430 diaphragm-spring type
Rated RPM: 1900 RPM
Front axle: HANDE MAN 9500kg
Ncedpfoy Tyd Aex Aqvot
Rear axle: HANDE MAN16000kg*2
hub reduction axle with inter-wheel differential and different lock
Rear axle ratio:4.769
Steering Type: ZF8098 technology
integral circulating ball power steering
Chassis Frame: 850x300(8+5)
double plate chassis frame
= More information =
Tyre size: 12.00R24*11
Number of cylinders: 6
Engine capacity: 11.596 cc
GVW: 9.400 kg
Listing
Doha
2,861 km
Sheet metal processing center
SalvagniniP4x-2516
Call
Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle.
Max. sheet length: 3,048 mm
Max. sheet width: 1,524 mm
Max. bending length: 2,500 mm
Sheet thickness (steel ~410 MPa): 2.5 mm (90°)
Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°)
Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°)
Max. bending angle: +135° / -135°
Max. flange height: 165 mm
Max. diagonal (rotatable sheet): 2,800 mm
Min. sheet thickness: 0.5 mm
Max. pack height (incl. pallet): 350 mm
Max. load capacity: 5,000 kg
Vertical stroke (loading table): 550 mm
Rotation capability: 0°, 90°, 180°, 270°
Automatic loading system with scissor lift table ()
Conveyor–destacker (PCD3015) for automatic feeding
Automatic panel bending center P4X-2516
Upper bending blade (LS1)
Lower bending blade (LI)
SiX CNC control system
Nedpsyr Acksfx Aqvoct
SOLE.P4 production management software
OFFICE.P4 offline programming software
ABA automatic blankholder (automatic length adjustment)
CLA-A asymmetric auxiliary bending system
UC1000-G13 gooseneck tool set
Eroded clamp (for coated / special materials)
PSE automatic cleaning & lubrication system
SAP panel unloader / accumulator
Spare parts kit (approx. €7,000 value)
Listing
Fumane (Verona)
6,710 km
Used STORK minature line fro glass & PET 200 BPM
Krones
Call
Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line fro glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 200 BPM (miniature 0.05L bottles)Filling type: vacuum filling Bottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant au...
Njdpfx Aqey Uduusvsct
Listing
Fumane (Verona)
6,710 km
Tetra therm aseptic flex NG - 6.3T UTH with homogenizer
Tetra Pak®Tetra Therm Aseptic Flex NG
Call
Year of construction: 2012, operating hours: 500 h, condition: used, machine/vehicle number: AT107, Technical Specifications & Performance DataThis UHT system with integrated homogenizer is engineered for continuous ultra-high temperature processing in beverage production and industrial packaging environments. The unit belongs to the 6.3T capacity class and is suitable for aseptic downstream filling as part of a used bottling line or as a second hand standalone processing module. Designed to reach high sterilization temperatures, it ensures product safety and extended ambient shelf life when combined with aseptic handling.Process type: Continuous indirect UHT treatment with integrated homogenizationThroughput class: 6.3TMaximum process temperature: Up to 144°CConfiguration: UHT module plus homogenizerOperation: Continuous processing for high uptimeBuild: Industrial, hygienic design suitable for beverage and dairy applicationsAdvanced Automation & Control SystemsThe system is prepared for modern automation architectures, supporting PLC/HMI-based operation with recipe-driven control and monitored process parameters. Operator guidance and safety interlocks help maintain stable thermal profiles and consistent homogenization outcomes.Automated temperature control for heating, holding, and cooling sectionsRecipe-based setpoints for repeatable product changesOperator HMI for real-time status, alarms, and trend visibilityInterlocks for safe operation and process integrityProduction Line Integration CapabilitiesThis processing unit integrates upstream with raw product reception and downstream with aseptic tanks, fillers, and packaging machinery. It can operate as a standalone skid or be embedded within a broader beverage production line.Inline or standalone operation for flexible plant layoutsCompatible with aseptic tanks and filling machinesSupports multi-product workflows (e.g., milk and juice) with recipe controlDesigned for efficient changeover between products within the same categoryMachine Condition & Maintenance HistoryThe equipment is offered as a second hand unit in as-is condition with no missing parts. Having accumulated only 150 operational hours, the machine is in excellent working order. The new model generation ensures contemporary design principles, while the as-is sale allows rapid deployment for plants seeking proven technology at competitive lead times.Condition: As-is (Only 150 operating hours)Completeness: No missing partsModel generation: New modelOperational Performance & VersatilityCombining UHT treatment with an integrated homogenizer delivers both microbial stability and controlled product texture. This makes the system ideal for beverage production workflows requiring long shelf life with preserved sensory attributes.Suitable for milk and juice process applicationsHomogenization for stable emulsions and improved mouthfeelHigh thermal capability up to 144°C for robust sterilization marginsConsistent process quality for industrial packaging operations
Nedpfxjy Uc T Nj Aqvect
Listing
Łódź
6,155 km
Injection molding machine
Ferromatik MilacronK-TEC 350-2650
Call
Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot
Year of manufacture: 2017
Injection unit:
Screw diameter: 70 mm
Shot weight: 1,104 g
Injection pressure: 2,175 bar
Dosage volume: 1,213 cm³
Clamping unit:
Clamping force: 350 t
Tie bar distance: 750 x 750 mm
Platen size: 1,110 x 1,165 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: MOSAIC - touchscreen
Nodpfxjy Sltys Aqvoct
Additional equipment:
Very good technical condition
High-speed machine
Operating hours: approx. 10,000 h (automatic mode)
Euromap 67
Robot interface
Air valve x 5
Hydraulic core pull x 3
Hot runner control
Hardened injection unit - bimetallic
Proportional valve on injection unit – precise injection
Parallel movements
Machine equipped with cylinder / nitrogen accumulator (additional charge for high-speed operation)
Energy-efficient machine – features a system with three variable output hydraulic pumps
Machine has been regularly serviced by authorized service in Germany
Dimensions:
Weight: 22,000 kg
Length/Width/Height: 8.62 x 2.21 x 2.80 m
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the selected machine’s technical tests or participate in live technical demonstrations at our premises in Łódź.
Price: On request
Auction
Auction starting soon
Hamburg
6,807 km
Empty container handler with front spreader
KonecranesSMV 6/7 ECC 100 DS
Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle.
The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information.
TECHNICAL DETAILS
Lifting height: 19,065 mm
Overall height: 10,490–19,710 mm
Side shift: ±600 mm
Tilt compensation: ±6°
Mechanical height compensation: 200 mm
Load center: 1,220 mm
Turning radius: 6,000 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (W x H): 6,660 x 10,490 mm
Total weight: 44,900 kg
Drive system
Engine: Volvo TAD-881-VE
Fuel type: Diesel
Output: 185 kW
Torque: 1,175 Nm
Engine speed: 1,600 rpm
Displacement: 7.7 l
Cylinders: 6
Emission standard: EU Stage 5
Transmission: ZF Automatic 4WG-191-B
Drive axle: Kessler D91
Track width: 4,600 mm
Hydraulic system
Filtration: 10 µm
Accumulator pressure: 60 bar
Accumulator volume: 2 l
Electrical system
System voltage: 24 V
Cabin
Cabin length: 1,605 mm
Cabin width: 1,480 mm
Cabin height: 1,620 mm
Connection: 24 V / 10 A
Tyres
Tyre type: 14.00 x 24"
PR: 24
EQUIPMENT
Box-frame chassis
Bolted tanks
Mudguards
Crane lifting eyes
Turbo-II air filter
Wheel nut protection
HLL filter
Oil tank preheating
LED lighting
Reversing alarm
Beacon light
Nedpfx Aoy T Ed Isqvoct
MD4 touch display
Drive login system
Cab ventilation
Interior rearview mirror
Clothes hook
Side mirrors
Air horn
USB port
Central lubrication system
Reversing camera
Fire extinguisher
Anti-slip strips
Cabin protection frame
Auction
Auction starting soon
Hamburg
6,807 km
Container stacker
KonecranesSMV 25-1200 C
Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00.
The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then.
TECHNICAL DETAILS
Lifting height: 19,065 mm
Load center: 1,220 mm
External turning radius: 6,000 mm
Overall height: 10,490–19,710 mm
Side clamps
Sideshift: ±600 mm
Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (W x H): 6,660 x 10,490 mm
Total weight: 44,900 kg
Engine
Engine: Volvo TAD-881-VE
Fuel type: Diesel
Output: 185 kW / 1,175 Nm at 1,600 rpm
Displacement: 7.7 liters / 6 cylinders / EU Stage 5
Transmission: ZF Automatic 4WG-191-B
Drive axle: Kessler D91 (track width: 4,600 mm)
Electrical system: 24 V CAN bus system with 7" color display
EQUIPMENT
Box frame, bolted tanks, mudguards
Operator protection roof (steel construction)
External rear-view mirrors (high mounted)
Variable piston pumps with return flow filter (10 µm)
Joystick control with power steering
Pressure accumulator for lift mast (60 bar / 2 liters)
LED lighting (position, indicator, work, and rear lights)
Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm
Ncjdpfx Aey T Eb Tsqvst
3 wipers, ventilation, opening side windows
Electric 24V socket (10A), internal rear-view mirror, coat hook
Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm
Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps
Central lubrication system 'Lincoln'
Reversing camera (MOTEC, 6.7" color display, heated lens)
Fire extinguisher (6 kg, mounted externally on the left)
Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM
Operating manual, driver’s handbook, spare parts catalogue
Listing
Avižieniai
5,862 km
Paint finishing system
Wagner
Call
Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing.
Maximum part size: L x W x H = 2600 x 400 x 1850 mm
Equipment
Technological conveyor
Automatic speed V = 1.2 m/min
Njdev Ed Ukjpfx Aqvsct
Speed regulation from 0.5 to 2.5 m/min
Preparation station MNA-3-LPG, total length 16.7 m
Entry area: L = 2.5 m
a. Washing, degreasing and phosphating: L = 3.6 m
Number of spray frames – 10
Number of nozzles in the frame – 18
Total number of nozzles – 180
Pump capacity – 162 m³/h
Pump power – 15 kW
4 m³ capacity for active liquid
Internal heat exchanger with LPG burner – 160 kW
Temperature – 50°C
Mechanical oil separator
Filtration system
Dosing system with diaphragm pump and regulator
Washing time – 3 min
b. Drip zone L = 3.1 m
Drip time – 2 min 30 sec
c. First rinse L = 1.2 m
Number of spray frames – 4
Number of nozzles in the frame – 18
Total number of nozzles – 64
Pump capacity – 38 m³/h
Pump power – 3 kW
1.5 m³ water capacity
Rinse time – 1 min
d. Drip zone L = 3.1 m
Drip time – 2 min 30 sec
e. Fine rinse L = 1.28 m
Number of spray frames – 3
Number of nozzles in the frame – 18
Total number of nozzles – 54
Pump capacity – 33 m³/h
1.5 m³ water capacity
Pump power – 3 kW
Additional spray frame
Rinse time – 1 min
f. Drip zone L = 2 m
Drip duration – 1 min 40 sec
Three connections for the extraction system with three fans
Working zone made of stainless steel
Pipes made of PVC or stainless steel
1 pc.
Automatic dryer after washing AST-1-KLPG:
Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm
Air curtains on each side to reduce heat loss
Indirect heat exchanger, heated by LPG, 200 kW
Three fans, air supply 6000 m³/h
Two connections for the extraction system
Temperature sensor and regulator
Overheating sensor
Circulation sensor
Working zone made of galvanized steel
Thermal insulation 200 mm thick
Drying time – 10 min
1 pc.
Automatic polymerization oven APT-2-KLPG
Working area dimensions L x W x H = 10200 x 3600 x 2800 mm
Air curtains on one side to reduce heat loss
Two indirect heat exchangers heated by LPG, each 300 kW
Eight circulation fans, each with a capacity of 6000 m³/h
Two connections for the exhaust system
Temperature sensor and regulator
Overheating sensor
Circulation sensor
Working area made of galvanized steel
Thermal insulation 200 mm thick
Polymerization time – 25 min
1 pc.
Overhead rail transportation system for ATR paint shop:
Straight rail with hangers L = 400 mm – 146 m
Drive station – 2 pcs.
Tension station – 1 pc.
Chain lubrication station – 1 pc.
Rail support structure drawings – 1 set.
Listing
파주시
4,953 km
Folding machine
HorizonSAC-150a SAC-150m SA-40 ST-40
Call
Condition: used, Year of construction: 2012, functionality: fully functional, Horizon SAC-150 Collating System
4 Towers / 60 Bins (2012, Used)
Configuration:
SAC-150 Collator (4 Towers / 60 Bins)
SA-40 Sub Accumulator
ST-40 Bypass Stacker
Specifications
SAC-150
– Modules: SAC-150a (Main Tower) / SAC-150m (Extension Towers)
– Number of Bins: 60
– Sheet Size: Min: 148 × 210 mm Max: 297 × 420 mm
– Bin Pile Height: 40 mm
Nsdpfx Asy I Hx Asqvoct
– Sheet Weight Range 45 gsm to 135 gsm
– Overlap Settings: 4 steps
– Power: AC 100V, 50/60Hz
SA-40
– Accumulate Size: 140 × 204 mm ~ 350 × 500 mm
– Pass Through Size: 120 × 148 mm ~ 350 × 500 mm
ST-40
– Sheet Size: 182 × 128 mm ~ 350 × 500 mm
– Stack Capacity: 360 mm
Listing
Netherlands
6,710 km
Used complete CSD can bottling line – 14,000 cans/hour
Call
Condition: used, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview
This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution.
Technical Specifications & Performance Data
Core Monoblock: Can Filler–Seamer
Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980)
Seamer: Ferrum 706, 6 heads (year: 1982)
Product type: Carbonated soft drinks (CSD)
Nominal capacity: 14,000 cans/hour on 250 ml
Can end: 200 end (industry size 200)
Monoblock configuration: filler–seamer integrated block for minimized DO pickup
Formats & Throughput
Primary can size: 250 ml
Line speed: up to 14,000 cph (format- and product-dependent)
Process Equipment Included
Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011)
CIP station, three tanks (p.y. 2011)
Syrup room with cooling system (p.y. 2011)
Nagema mixer (p.y. 1992)
Five ready-to-drink tanks, 100 hl each, steel with food-grade lining
Beverage filter (p.y. 2011)
Frezart can depalletizer (p.y. 2009, start 2011)
Two can washers adapted to 250 ml (p.y. 2011)
Hermis tunnel pasteurizer (p.y. 2015)
Stratec can fill level inspector (p.y. 2000)
Victor can printer / coder (p.y. 2020)
Kisters packaging machine (p.y. 1993)
Keber palletizer (p.y. 1997)
Sita pallet wrapper (p.y. 2011)
Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011)
Thermo-shrink labeling line for blank cans (p.y. 2015)
Advanced Automation & Control Systems
In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers
Product identification: Victor industrial can printer for date/lot coding
CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways
Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime
Ncsdpfx Aqsyhbpzsvst
Detailed electrical and controls documentation is available on request.
Production Line Integration Capabilities
Upstream
Depalletizing of empty cans (Frezart) and transfer to washing
Dual can washers adapted for 250 ml format
Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation
Compressed air supply package (Kaeser) with booster and storage
Filling & Seaming
Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention
Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends
Downstream
Hermis tunnel pa...
Listing
Fumane (Verona)
6,710 km
Used KHS Innofill can line 16000 CPH - year 2018
KHS
Call
Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer prepares ca...
Ncsdpoy Szbyofx Aqvot
Listing
Offenbach an der Queich
6,914 km
Pumping Set
DEPADL15-PM-TTT
Call
Year of construction: 2017, condition: good (used), Required air-pressure 7 bar
weight 3 kg
dimensions of the machine ca. 212 x 265 X 200 mm BxHxT
Air Operated Diaphragm Pump
Type(s) DL15-PM-TTT
Technical data:
- Connection size medium - 1/2" BSPT female thread
- Material housing - PP polypropylene
Nedpfx Aey Ty Axoqvjct
- Center section - PP polypropylene
- Diaphragm material - PTFE
- O-ring material - PTFE
- Check valve material - PTFE
- Max. flow rate - 2.2 m³/h
- Max. medium pressure - 7 bar
- Compressed air supply - up to 7 bar
- Solid size max. - 2.5 mm
- Dry suction max. - 2.5 m
- Dimensions WxHXT - 212 x 265 X 200 mm
- Net weight - 3.5 kg
PTFE diaphragm for the highest chemical requirements, very good resistance to
aggressive media and chemicals, temperature range: -5 °C - +130 °C.
PP polypropylene housing is highly resistant to acids, many water-soluble,
inorganic acids and bases. Also available as electrically conductive housing
material. Temperature range: 0°C - +60°C
Listing
Hessisch Lichtenau
6,811 km
Hydraulic power unit, silent power unit, drive module, hydraulic unit, compact power unit
BOSCH REXROTHUPE 5- /1.50V7/06-10A-H-1-S090+04100891
Call
Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH
Hydraulic unit
Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891
Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010
Pressure output: 55 bar
Delivery rate: 13 L/min.
Tank capacity: approx. 20 liters
Engine power: 1.5 kW
Speed: 1440 rpm.
Mains connection: 400 volts, 50 Hz
- Unit was used for an operating pressure of approx. 80 bar
- 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar
- 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump
- Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13
- 2 hydraulic pressure accumulators
- 1 replaceable filter cartridge
- 1 pressure sensor IFM, type TR7 430
- 1 oil sight glass
- Hydraulic connections 2x 18L
- Sold without oil content
Space requirement L x W x H: 700 x 450 x 850 mm
Weight: 105 kg
Ncedpfx Asv Ev Dqeqvet
very good condition
Listing
Trenčianske Stankovce
6,198 km
Arburg 370S 600-290 (2009)
Arburg370S 600-290
Call
Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 | Screw ø 35 mm
📐 CLAMPING UNIT
Clamping force: 600 kN
Closing force: 38 kN
Opening force / increased: 24 / 160 kN
Opening stroke: 400 mm
Mould height min.: 200 mm
Daylight max.: 600 mm
Distance between tie bars: 370 × 370 mm
Platen size: 510 × 510 mm
Weight of mov. mould half: 360 kg
Ejector force: 125 kN
Ejector stroke: 125 mm
⚙️ HYDRAULICS
Drive power: 15 kW
Total connected load: 23,9 kW
💉 INJECTION UNIT — ø 35 mm
Screw stroke max.: 150 mm
Effective screw length L/D: 20
Injection volume max.: 132 cm³
Shot weight max.: 20,5 g PS
Material throughput max.: 10,5 kg/h PS
Nedoy Nmkbopfx Aqvsct
Injection pressure max.: 2000 bar
Injection flow max.: 140 cm³/s
Injection flow with accumulator: 430 cm³/s
Back pressure max.: 350 / 200 bar
Screw speed max.: 54 m/min
Screw torque max.: 380 Nm
Nozzle contact force: 60 kN
Nozzle retraction stroke: 240 mm
Heating zones / power: 4 zóny / 5,8 kW
Nozzle heating: 0,6 kW
Hopper capacity: 50 l
📦 DIMENSIONS & WEIGHT
Oil capacity: 135 l
Net weight: 3300 kg
Electrical connection: 80 A
Listing
Hessisch Lichtenau
6,811 km
Film unwinding machine, film dispenser, winding and unwinding reel, film strip conveyor system, unwi
WIDMANN
Call
Condition: used, WIDMANN automatic film unwinder, film unwinder
Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine
Unwinder with deflection rollers and film guide system
Unwinder with deflection rollers for constant strap tension
Year of construction approx. 2000
Roll width - coil width max. 400 mm
Material width max. 400 mm
Deflection rollers Ø 80 mm
Deflection roller width 430 mm
Roll weight - coil weight max. 150 kg
Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter)
Roll outer diameter - coil outer diameter max. 600 mm
Interference circle with rotation of the film reel max. Ø 800 mm
Reel shaft speed approx. 70 rpm
Motor power - drive of the film reel 0.37 kW
Mains connection 400 Volt, 50 Hz
Ncsdpfxsud U Sfo Aqvot
- Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft
- Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm
- 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide
- Gear motor LENZE with brake to drive the film roll (0.37 kW)
- Electrical system not ready for operation, see pictures
Space requirement L x W x H approx. 1000 x 1000 x 1900 mm
net weight 360 kg
good condition
Listing
Hessisch Lichtenau
6,811 km
Film unwinding machine, film dispenser, winding and unwinding reel, film band system, unwinding reel
WIDMANN
Call
Condition: used, WIDMANN automatic film unwinder, film unwinder
Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine
Unwinder with deflection rollers and film guide system
Ncodju H R Iqspfx Aqvst
Unwinder with deflection rollers for constant strap tension
Year of construction approx. 2000
Roll width - coil width max. 400 mm
Material width max. 400 mm
Deflection rollers Ø 80 mm
Deflection roller width 430 mm
Roll weight - coil weight max. 150 kg
Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter)
Roll outer diameter - coil outer diameter max. 600 mm
Interference circle with rotation of the film reel max. Ø 800 mm
Reel shaft speed approx. 70 rpm
Motor power - drive of the film roll 0.37 kW
Motor power - drive of the flat film into the vacuum shaft 0.25 kW
Mains connection 400 Volt, 50 Hz
- Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft
- Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm
- 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide
- LENZE geared motor with brake to drive the film roll (0.37 kW)
- LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW)
Space requirement L x W x H 1900 x 1300 x 1900 mm
net weight 580 kg
Good condition
Trust Seal
Dealers certified through Machineseeker

Listing
Hessisch Lichtenau
6,811 km
Tensile force measuring device, crane scale with memory and printer for measured values, heavy-duty
MWT142
Call
Condition: used, Electronic crane scale MWT type 142
Make No.: 142571 Year of construction 1993
Ncsdpfx Aeg D H Risqvot
Tensile force measuring device, crane scale
Measuring range: 2.500 to 80.000 kg
Smallest measured value: 20 kg
Power supply via 12 Volt accumulator
- Suspension shackle for double hook, anchor hook
- Operation, storage of measured values and tare via remote control
- Memory for measured values (weights)
- Printer for measured values
very massive and high quality body made of steel
own weight: approx. 200 kg
Listing
Fumane (Verona)
6,710 km
Various Equipment
Tetra Pak®Helix 30
Call
Condition: used, Year of construction: 2018, Used Tetra Pak HELIX 30 accumulator year 2018
Accumulation and Flow Management
The Tetra Pak HELIX 30 from 2018 optimizes the accumulation and flow of production lines with advanced technology. Moreover, this machine handles large quantities of packaging efficiently and ensures operational continuity during slowdowns or stops in subsequent stages of the production line.
Technical Specifications of the Tetra Pak HELIX 30
The machine, identified as H236-ACHX, processes the 200S format with exceptional versatility for industrial applications. Furthermore, Tetra Pak’s Helix technology facilitates smooth and uninterrupted accumulation, reducing the risk of container damage and enhancing productivity. Consequently, the model achieves a nominal capacity of 44M, making it highly effective for high-speed production lines.
Innovation in Container Accumulation in the Tetra Pak Helix 30
The Tetra Pak HELIX 30 from 2018 streamlines container flow and ensures steady production even during peak loads. Additionally, its compact design allows seamless integration into existing production lines without requiring significant structural adjustments. Thus, this feature delivers fast and efficient solutions for industrial facilities.
Industrial Applications of the Tetra Pak HELIX 30
The machine handles the 200S packaging format efficiently, which the food and beverage industries widely use. In fact, its accumulation system prepares containers quickly for subsequent processing stages, minimizing downtime and maximizing productivity. As a result, the Tetra Pak HELIX 30 from 2018 fulfills the demands of modern production by offering reliable and high-performance operations.
Maintenance and Sustainability
The Tetra Pak HELIX 30 from 2018 simplifies maintenance through its easily accessible components, which reduce intervention times and improve equipment longevity. Meanwhile, its sustainable design lowers energy consumption and reduces operational costs while minimizing its environmental footprint. Therefore, companies benefit from its long-term cost efficiency and eco-friendly operation.
Conclusion of the Tetra Pak Helix 30
Ncsdpovgvahefx Aqvet
In conclusion, the Tetra Pak HELIX 30 from 2018 offers reliability, efficiency, and sustainability to companies in the bottling sector. Furthermore, its adaptable design supports diverse production line configurations, while its robust construction upholds Tetra Pak’s reputation for quality. As such, this machine becomes a benchmark for efficiency in the industry.
Listing
Fumane (Verona)
6,710 km
Case Erector
Mondo & Scaglione376 / C
Call
Condition: used, Year of construction: 1996, Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min
This Case Erector not only forms cardboard boxes of the “American” type but also ensures high efficiency and reliability. Additionally, it seals the bottom of each box with hot melt glue, and, most importantly, it processes up to 23 boxes per minute. Therefore, it is perfect for production lines that demand both precision and speed.
Carton Magazine and Carton Transfer Carriage
Ncjdpfx Aevgvi Asqvet
First, the machine features a horizontally mounted carton magazine at the lower rear, which optimizes space and provides easy access for loading. Furthermore, the multifunction carton transfer carriage picks, opens, and transfers cartons using an electromechanical control system. As a result, this setup ensures precise, continuous operation and significantly reduces downtime during format changes or adjustments.
Flap Closing and Glue Application
Next, this machine automatically manages the closing of box flaps. Specifically, it closes the short lower flaps using an electro-pneumatic command, while the long flaps close as the carton moves. In addition, the hot melt glue unit ensures a reliable, secure bottom seal. Consequently, the machine handles these processes entirely automatically, which, in turn, increases efficiency and minimizes the need for manual intervention.
Control and Safety Systems
In terms of control, the machine continuously monitors the presence of cartons in the magazine and during transfer through advanced control systems. Moreover, it alerts operators when excess cartons accumulate at the exit. Operators, meanwhile, control all machine functions via a touch-screen display, which simplifies adjustments and format changes. Additionally, this display immediately shows any anomalies or technical issues, which helps improve preventive maintenance efforts.
Siemens PLC and Safety of the Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min
The Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min, in addition, uses a Siemens S7 series PLC to precisely control every operation. Moreover, the electrical system uses low-voltage controls, which further improves operator safety. Additionally, the machine includes protective guards and safety devices to meet workplace safety regulations, thereby ensuring safe use in highly regulated production environments.
Performance and Technical Specifications
In terms of performance, the machine can produce between 15 and 23 boxes per minute, depending on box size and configuration. As for the carton magazine, it holds between 100 and 150 cartons, thus allowing continuous operation without frequent reloading. Furthermore, it runs on 1.5 kW of power, with an additional 3.5 kW for the glue system, making it energy-efficient. Additionally, the machine operates at a working pressure of 5 bar and consumes 80-100 liters of air per minute, which further contributes to its overall efficiency.
Listing
Fumane (Verona)
6,710 km
Used KHS Beer can line - 48.000 CPH
KHS
Call
Condition: used, Year of construction: 2013, machine/vehicle number: LC630, Used KHS Beer can line - 48.000 CPHTechnical Specifications & Performance DataThis KHS complete beer can bottling line is engineered for high-speed beverage production and industrial packaging performance. It is a second hand, used bottling line configured for aluminum cans with robust components across depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The line delivers consistent throughput and quality suitable for large-scale beverage production.Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568LContainer types: Aluminum cansFormats: Compatible with 0.5L, 0.568L can formatsCan dimensions: Diameter 66.30 mm; Height 168 mmLid specifications: Aluminum; Diameter 59.44 mm; Height 2.07 mmFilling technology: Volumetric pressure filling with MID (magnetic inductive flow meters)Seaming technology: High-speed multi-head can seamerPasteurization: KHS INNOPRO KZE 250 flash pasteurizerInspection: KHS Innocheck CUB fill level and closure inspectionPrimary installation year: 2013 (pallet wrapper 2020)Manufacturer: KHS engineering with complementary equipment from leading suppliersAdvanced Automation & Control SystemsThe line integrates modern automation features typical of KHS bottling equipment, ensuring stable high-speed operation and consistent product quality. Automated lid feeding and distribution support uninterrupted seaming, while inline inspection and coding systems help maintain traceability and quality control.Automated depalletizing, conveying, and palletizing for continuous material flowRecipe-based operations and quick adjustments for format changesInline inspection for fill height and closure integrityContinuous inkjet coding for batch and date markingDynamic weight control for in-line verificationSafety guarding and interlocks across critical stationsProduction Line Integration CapabilitiesThis complete packaging machinery setup is designed for cohesive end-to-end operation, from empty can depalletizing through finished pallet wrapping. Conveyors and accumulation are matched for high-speed can handling, and the shrink packer and palletizing cell deliver strong downstream packaging performance.Inline operation with synchronized conveyors: can, pack, and pallet transportFormat change capability for 0.5L and 0.568L cansSuitable for beer production and compatible with aluminum can handling best practicesModular integration of depalletizer, filler, seamer, flash pasteurizer, inspection, shrink packer, palletizer, and wrapperMachine Condition & Maintenance HistoryThe line is in very good condition and has been regularly maintained. It is already dismantled, securely packed, and ready for shipment to reduce commissioning timelines at the new site. Availability is scheduled for Q1 2026, facilitating advance planning for capacity exp...
Nodpsy Rxx Hofx Aqvsct
We make it easier for you to find: "diaphragm accumulators"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Diaphragm Accumulators (516)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month























































































































































































































































































