Used Diaphragm Accumulators for sale (578)

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX - EASY RIDE ACCUMULATOR - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING Laedpfx Asxz Eztsg Ajf

Condition: excellent (used), Year of construction: 2009, operating hours: 2,200 h, functionality: fully functional, total width: 2,550 mm, total length: 8,650 mm, pressure: 150 bar, operating pressure: 150 bar, type of input current: DC, fuel: diesel, overall weight: 27,000 kg, empty load weight: 14,555 kg, temperature: 60 °C, fuel tank capacity: 700 l, type of cooling: water, Equipment: crane, rotational speed infinitely variable, type plate available, An authorized SUBARU dealer has a special vehicle for sale that was used for cleaning tunnels and high facades in Sweden. It was also used for high-pressure cleaning of highways and roads. It is equipped with a water cannon that can be controlled from the cab. Additionally, a power generator is installed on the vehicle body. It has a tow hitch that could, for example, be used to pull a sweeper or brushes for road cleaning, or similar equipment for maintaining road cleanliness. The Mercedes was purchased from a municipal company and was regularly serviced. We can manufacture dedicated cleaning nozzles for, for example, cleaning roads or walls. The body was manufactured by "MEC TEC AS" and features highly efficient pumps for water cleaning, up to 300 liters per minute! It also includes a power generator to power the body. It has a 11,500-liter water tank and a 500-liter tank for chemicals. The engine compartment is located at the rear of the body and contains: - Diesel engine - Large, high-pressure water pump connected to the diesel engine via a clutch - Hydraulic pump connected to the diesel engine at the front, which drives: - Small high-pressure pump for water used for cleaning vehicles and technical installations - In addition, there is a lance for remote cleaning - Chemical pump located in a separate cabinet at the rear on the right side - 3 diaphragm pumps located on the right side of the vehicle. - 2 hydraulic pumps connected to the distributor near the diesel engine, which drive: - Hydraulic radiator fan - Arm located on top of the vehicle - Water heating for the small high-pressure pump A tower is built above the cab and attached to an auxiliary frame. This tower forms the basis for the cleaning arm; we offer the possibility of manufacturing a dedicated nozzle for cleaning larger surfaces. The diesel tank for the body has a capacity of 700 liters. - Generator for generating power for external devices - Hydraulic oil tank - Hydraulic oil cooler Mass and dimensions: GVWR: 27,000 kg Unladen weight: 14,555 kg Payload: 12,445 kg GVWR of the combination: 71,000 kg On the drawbar (o.1): 44,000 kg External dimensions: Length: 865 cm Width: 255 cm Wheelbase: 3900/1350 mm Emission standard: EURO 6 Equipment: Body with water tank Cannon/Arm for "shooting" water Arm adjustment in the cab "ALLISON" automatic transmission Power generator Seating: 4 seats Reversing camera On-board computer Air conditioning Tachograph 3rd steerable and liftable axle Rear axle lock Air suspension front and rear Tow hitch/coupling Additional exterior lighting Orange lights Factory radio ABS Immobilizer Ledpszvnipjfx Ag Asaf Electric side window Electric mirrors Heated side mirrors Inspection report: The vehicle is technically and mechanically sound and arrived at our company from Sweden without any problems. It has been regularly serviced. The water cleaning system and pumps have been checked and are functioning properly. It is currently fitted with winter tires, size: 315/80R22.5, with approximately 70% tread remaining. The vehicle is, of course, accident-free and has a genuine mileage, verified by the authorized service center and the Swedish authorities. The stated price is net and applies to export and to companies. A significant discount may be possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Laodpfxjztwl Is Ag Asf

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 5000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for Glass containers, particularly in 1.5L formats.Manufacturer: TMG Model:VEGA 60 Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrier Interlayermanagement: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazine Advanced Automation & Control Systems The VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 5000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conveyor alignment. Power supply must match the PLC and drive requirements, and provision for compressed air may be needed for actuators and safety systems. A level, reinforced floor and clear operator access paths are recommended t... Lasdpfozc Hqysx Ag Aef

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) Lodpjv Dftxjfx Ag Ajaf 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Safety features: Ledpezt Dyfofx Ag Asaf - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. • Operating Principle: Continuous cycle, high-speed automated assembly • Control System: Industrial PC (IPC) with proprietary software and PLC integration • Wood Feed System: Automatic hopper or magazine feed for boards and blocks • Nailing Heads: Multi-head pneumatic or hydraulic nailing system • Nail Feed: Automatic bulk nail feeder and sorting system • Stacking System: Integrated automated stacking, accumulating, and conveying • Safety Features: Full perimeter guarding, emergency stops, safety light curtains • Maximum Pallet Production Rate: Up to 1500 - 2000 pallets per 8-hour shift (dependent on pallet size and complexity) • Minimum Pallet Dimensions (L x W): Approximately 600 mm x 600 mm Ledpfszug Riox Ag Aoaf • Maximum Pallet Dimensions (L x W): Approximately 1500 mm x 1500 mm • Total Installed Power: Typically 20 - 40 kW (depending on configuration) • Required Air Pressure: 6 - 8 bar • Machine Footprint (Approx. L x W): Highly variable, typically 20 m x 5 m (production line layout)

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ledpfxezvmx Ns Ag Aoaf Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours Lajdjycwvaepfx Ag Asf 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Lajdpfxoy N Ubzo Ag Asf Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 S HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 1000 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 6.4 Laodpszud Npefx Ag Ajf Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Lajdpfxjx H Thuj Ag Ajf Operational Performance & Versatility Product scope: UHT milk, juice, and shelf-stable beverages

Condition: ready for operation (used), Abel EM-025Z0110-SG Electromagnetic diaphragm pump, serial number: 3001080-01 + Lenze GST06-2M VAL 090C12 spur gear reducer + MHEMAXX090-12C1C three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Lodpfx Agoi D Eygj Aeaf

Condition: ready for operation (used), Abel EM-025Z0110-SG Electromagnetic diaphragm pump, serial number: 3001302-01 + Lenze GST06-2M VAL 090CM4 spur gear reducer + M55AP090M045E00CT three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Laedpji D Eykjfx Ag Aof

Condition: new, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,350 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Flat loading platform, air suspension with raising and lowering function, axle load scales, total loading platform length approximately 9,350 mm, 32 lashing points, 10 pocket slots in the outer frame, access ramps (approximately 3,100 x 760 mm), climbing strip on the outside of the ramp and rear slope, access ramps adjustable laterally, 68 mm thick wooden floor, storage box with lid for lashing chains or tensioning straps, contour marking according to regulations, rotating beacon, spring accumulator parking brake, including axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic adjustment of the ramps, price: €1,000, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Lajdszr Uibspfx Ag Aof

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) Ledpjvrilujfx Ag Ajaf • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FTC-200 Tracked Cone Crusher; It is produced in the form of feeding bunker, generator, cone crusher and stock belt.FTC-200 Tracked Cone Crusher, which is moved with a remote control on a steel track, successfully completes all commands by moving on its tracks in all difficult climatic conditions and rough terrain.FTC-200 Crawler Cone Crusher, which is delicately designed and meticulously manufactured for crushing stone, is the leading crawler crusher plant in the industry with its weight of 41,000 Kg and a crushing capacity of 100-180 T/H per hour. Eliminates Infrastructure Requirement FTC-200 Tracked Cone Crusher does not require an extra infrastructure as a production method, it can be moved by remote control and adapts to all difficult terrain conditions. Belt Feeder The Belt Feeder is the system in charge of quickly sending the loaded products to the crusher for the crushing process.It has a belt feeder motor protection system that gains mobility thanks to 2 motors. Thanks to this system, malfunctions that may occur as a result of overheating are prevented.The working intensity of the Belt Feeder and the crusher is coupled with the automation system. This feature works in two steps. Step 1: If the density of the crushed product in the crusher is high, the amperage of the crusher rises and this rise is detected by the automation system, the bunker transfer stops.It prevents product accumulation in the crusher feeding chute. This feature prevents the crusher from being worn out. Step 2: If the density of the crushed product in the crusher is low, the amperage of the crusher decreases. This decrease is detected by the automation system and bunker transfer increases. The feeding hopper delivers the products to the crusher faster. This feature keeps the production capacity at the maximum level. Cone Crusher Cone crushers are the crusher of FTC-200 Tracked Crushing Plant that can easily crush hard stones.The power transferred from the engine to the gear shaft is sent to the hub with gears.Thanks to the core and concave inside the crusher, it crushes the stones and breaks them into pieces. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of tapes can be increased upon the request of the user.10 mm EP 125 4-ply Band elastics, moving on 4mm st 37 Twisted Sheet, perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.Belt Elastics, which are produced resistant to wear, will never let you down and offer many years of service life. Pallet System Lasdpfx Aezibahsg Ajf The basic element that enables the movement of the FTC-200 Tracked Cone Crusher is the pallet system.Pallets carry the entire weight of the crusher. FABO, which does not ignore the importance of the pallet system on the crushing plant, has carried out various R&D studies and has revealed the pallet system that provides maximum durability, low maintenance cost and long-term service to its user in accordance with A1 Quality CE standards.

Condition: used, mileage: 38,501 km, power: 368 kW (500.34 HP), first registration: 11/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2025, Equipment: air conditioning, central locking, cruise control, differential lock, fridge, full service history, retarder, - 2 beds - 3D spoiler set with side skirts - ACC - adaptive cruise control - Simply Translated - Driver's seat with air suspension - Transmission oil cooler - I-Park Cool - auxiliary air conditioning - I-Save - I-See - Automatic climate control - Disc brakes - Sun visor Volvo FH500 AERO 4x2T Globetrotter XL, I-Save WITH GUARANTEE until 11/2027 Aero CMS Retarder Globetrotter XL Dual battery system: one battery pack for cab/other consumers and one starter battery pack Dynamic equipment Selected driver comfort package FH Plus living package, two beds High info and media package Aerodynamic/spoiler package ACC / adaptive cruise control with collision warning and emergency braking function Fuel-saving package for D13 I-Torque: efficiency-optimized cruise control with torque control, incl. I-Roll & brake cruise control I-ParkCool I-See I-shift AT2812 I-Save Diesel engine 12.8 l with turbocompound charger, 510 hp / 375 kW, 2,856 Nm Euro 6, Phase E Navigation system Leather steering wheel Comfort driver's seat, air-suspended, heated, seatbelt integrated Comfort co-driver's seat, air-suspended, seatbelt integrated Armrests covered with leather Two armrests each on driver and co-driver's seat Cool box / refrigerator Auxiliary heater Shift console (luxury) on bed (interior light, heating/air conditioning, sunroof, door, alarm clock, window, and radio) Interior lighting with dimmer and red night light Reinforced cab insulation Storage compartments at the rear/top Laedpfxezu Iq Rj Ag Ajf Curtains on windshield, windows, and in front of the bed Electric sunroof, glass LED main headlights LED fog lights, front Rear view monitoring/camera Camera monitoring system (CMS) Close-range camera on the co-driver's side My Truck app Engine brake with exhaust gas pressure regulator Adaptive traction control ACC / adaptive cruise control Emergency braking assist Side collision avoidance and turning assist (on both sides) Lane departure warning system Adaptive traction control Traffic sign recognition (ISA) Driver alertness system Preparation for OBU (toll device, Toll Collect) Connection for external FMS systems Rear axle RSS1352B Drive axle ratio 2.31 : 1 Wheelbase 3,800 mm Transmission oil cooler I-Shift operation via control unit on the driver's seat I-Shift AT2812, automated 12-speed transmission Manual shifting possible in automatic mode (incl. kickdown function) Auxiliary drive functions for I-Shift Side skirts on chassis with edge extension Extra spring accumulator on front axle Air tank aluminum 650 L aluminum tank left 405 L aluminum tank right 90 L AdBlue tank Parabolic suspension front, 2-leaf Air suspension rear, 4 air springs Austrian vehicle Year of manufacture 2025 Contact persons: Mr. Thomas Pletz (German, English) P: @: thomas. Mrs. Daniela RUDOLF (Spanish, Italian, English) P: / @: daniela. Vehicle location: Volvo Group Austria GmbH A-8141 Premstätten Rudolf-Diesel-Straße 13 Austria All information without guarantee, subject to change, errors and prior sale. Transmission: I-Shift, automatic Cab: extra high Front axle: tires...

Condition: like new (used), functionality: fully functional, power: 99 kW (134.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 11,797 kg, empty load weight: 11,797 kg, tire size: 17.5R25, tire condition: 90 %, drive condition: 90 %, axle configuration: 2 axles, shovel volume: 2.2 m³, Year of construction: 2022, operating hours: 1,050 h, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, hydraulics, onboard computer, pallet forks, soot filter, HYUNDAI HL930A Wheel Loader Year of manufacture: 2022 Operating hours: 1,050 Cyclone pre-air filter Standard brake accumulator Standard rear counterweight 300 Standard key Work lights: 4 front / 4 rear Voltage converter 24V -> 12V Laodpfx Agoyzbb Sj Ajf LED beacon Rear-view camera Five-year Hi-mate contract Headlights: halogen Standard rear lights Piping for 3rd hydraulic circuit Beka central lubrication system Piping for quick coupler Universal bucket 2.2 m³, with teeth With emergency steering Ride control Rear fenders Quick coupler ISO SW (Volvo type) Triangle TB5 radial tyres Control valve block (MCV) with 3 spools Air-suspended, heated comfort driver seat Hydraulic oil - VG46 Standard paintwork Single-lever joystick Wheel chock Front axle with limited slip differential Onboard weighing system (not calibrated)

Condition: reconditioned (used), functionality: fully functional, operating pressure: 800 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 695 M ECO HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. Lasdpfjzty Ekjx Ag Aof A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 5.9 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel-braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dosing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: excellent (used), Year of construction: 2017, Year of manufacture: 2017 Reach: 1200 mm Control system: IRC5 Rotary table Ljdpfoyu Ihwjx Ag Ajaf Dust extraction unit Automatic spray gun V5 HVLP Diaphragm pump DP Comboi Quantity: 2 units

Condition: used, Year of construction: 2021, operating hours: 400 h, machine/vehicle number: M345, Used SRAML filling monoblock 2400 BPH for glass - Year 2021Technical Specifications & Performance DataThis Sraml Filling Monoblock model I9P10VX is a compact, second hand bottling solution designed for efficient beverage production and industrial packaging applications. Engineered for glass bottle handling, it combines rinsing, filling, and capping in a single, space-saving frame. It is ideal for producers seeking reliable bottling equipment within a used bottling line or as a standalone upgrade to existing packaging machinery.Manufacturer: SramlModel: I9P10VXYear of manufacture: 2021Production speed: up to 2,400 bph at 0.25L; up to 1,500 bph at 0.75LContainer types: Glass bottlesWorked formats: 0.25L, 0.75LRinser: 9 grippers; 1 treatment (rinsing)Filler: 10 valves; fixed nozzlesCapper: 1 head; ROPP aluminum screw caps, 28x15.4mmDimensions (L x W x H): 2792 mm x 1258 mm x 2024 mmWeight: 1800 kgElectrical supply: 400 V, 50 HzInstalled power: 3 kWAdvanced Automation & Control SystemsThe monoblock integrates synchronized rinsing, filling, and capping turrets for stable operation and consistent bottle handling. The filling system with fixed nozzles provides precise, low-turbulence filling suitable for quality-sensitive products. Standard machine protections typical of modern bottling equipment help ensure operator safety and dependable uptime. The CE-marked design underlines compliance with European safety and hygiene directives for beverage production.Production Line Integration CapabilitiesThis unit can operate as a standalone filling monoblock or integrate seamlessly within a broader used bottling line. It is supplied with compatible Sraml ancillary equipment and conveyors for smooth line connectivity and accumulation management. Format changeovers support 0.25L and 0.75L glass bottles, helping producers switch SKUs with minimal downtime.Sraml RT800 rotating tableSraml RM6 rinsing medium unit with pump and heater (powered from the monoblock); 400V; 7 kW; 80 kgSraml BT1.5 bottle tilter; 400V; 1.1 kW; 350 kgSraml PT2000 packing table; 130 kgConveyors to connectMachine Condition & Maintenance HistoryManufactured in 2021, this filling monoblock has been lightly used for approximately three production seasons and records around 400 operating hours. It has been placed in dry storage since August 2024. Overall, it presents as a well-kept second hand machine suitable for rapid recommissioning in beverage production environments.Operational Performance & VersatilityDesigned for glass bottle handling, the system has processed apple juice and, thanks to its configuration, can be adapted to various still beverages. The ROPP capping head supports 28x15.4 mm aluminum screw closures common in premium juice and specialty drink applications. The 9-gripper rinser and 10-valve filler pairing provide balanced throughput a... Ljdpfx Agszrgrho Asaf

Condition: used, machine/vehicle number: R92, Used KOSME rotary bottle filling machineTechnical Specifications & Performance DataThis rotary rinser-filler is engineered by KOSME for precise, reliable wine bottling within industrial packaging environments. The carousel configuration ensures consistent bottle handling and steady throughput suitable for beverage production, including second hand and used bottling line integrations.Machine type: Rotary rinser-filler (carousel)Manufacturer: KOSMEPrimary application: Still wine fillingProduction speed: Typically a few thousand bottles per hour (configuration-dependent)Bottle size range: Approx. 0.25L to 1.5L (typical 0.75L wine format)Containers: Glass bottlesFilling principle: Level-controlled gravity or light vacuum (light depression)Rinsing: Integrated rinser with three spray stagesProduct contact materials: Stainless steelEnclosure: Glazed, lockable safety guardingAdvanced Automation & Control SystemsThe machine supports both automatic and manual operation to adapt to production needs and changeovers. Operator controls promote safe, efficient handling while maintaining high-quality filling.Automatic/manual mode selectorManual jog and machine start/stop controlsSpeed control for carousel rotation and process optimizationEmergency stop and reset-to-zero functionsLight signal for status indicationGate interlock and glazed safety enclosure for operator protectionDedicated rinsing control with three spray stagesProduction Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or operation as a standalone unit, this rotary rinser-filler interfaces easily with upstream depalletizing/inspection and downstream labeling, capsule application, and secondary packaging machinery. Its glass-bottle handling and stable carousel motion support consistent infeed and discharge on standard conveyor systems.Inline or standalone operationCompatible with conveyors and accumulation systemsFormat range suited to common wine bottles: 0.25L, 0.75L, 1.5LIdeal for beverage production environments focusing on wineMachine Condition & Maintenance HistoryThe machine has operated in a well-maintained environment and features a full glazed, lockable enclosure that preserves hygiene and safety. Backed by KOSME engineering, spare parts and service support are readily accessible through established industrial channels. The overall condition is aligned with second hand equipment prepared for reliable start-up in professional beverage production.Operational Performance & VersatilityPurpose-built for still wine, the level-controlled gravity or light-vacuum system ensures consistent fill levels across a range of formats without over-pressurizing glass containers. The stainless steel product-contact surfaces support hygienic operation and quick cleaning, while the integrated rinser with three spray sta... Lajdpfx Aszrgrbjg Aof

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included Lsdpfx Ajzgt Hneg Aeaf screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: good (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2,007 bar, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included machine without robot-system screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 2x Laodezgt Skspfx Ag Ajf machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG