Used Dmg Dmf 250 Linear for sale (398)

Condition: good (used), Year of construction: 2010, operating hours: 33,600 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Siemens 810D / ShopMill, table width: 560 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,000 h, Equipment: chip conveyor, Internal coolant supply (IKZ) Laodpfx Ajyua Sbekfea Control cabinet cooling: Rittal SK 33023.100 Tool magazine: 20 positions

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t Laedpfxoyxxyyo Akfsa dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t Ljdsw A Spvopfx Akfoaa dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. Lsdpfx Akjwf D Szefeaa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm Ledjwgi D Eopfx Akfoaa control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Laedpswf D S Iefx Akfsa #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders Lajdpfxeyzgc Us Akfea x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: used, Year of construction: 2007, CNC Turning and Milling Center Machine type: DMG CTX 210 V3 Control: Heidenhain CNC Pilot 4290 Year of manufacture: 2007 Available from: immediately / now Lajdoy Ecuhepfx Akfoa TECHNICAL DATA: Max. turning length: 365 mm Turning diameter: 290 mm Max. swing diameter over bed: 380 mm C-axis Spindle speed range: 20 - 6,000 rpm Bar capacity: 56 mm Travel distances: X-axis: 160 mm Z-axis: 339 mm Number of turrets: 1 Tool holder: VDI 30 Tool stations: 12 Driven tools: 12 Tailstock Space requirements (LxWxH): 2.88 m x 1.72 m x 1.67 m Machine weight: 4,200 kg Features: Operating manual / instruction manual

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,578 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information. Additional equipment Laedpfsyyvchjx Akfsa • Belt filter system • Coolant system • NC rotary table • Controlled B-axis in the milling head • Chip conveyor included • Coolant system included • 3D probe not included • Zero point clamping system not included • No holders or tools included Machine Benefits Technical Machine Benefits • Integrated coolant system with 40 bar pressure • Tool changer - number of places : 40 Extra Information Machine still under powerMachine on: 41,600 hSpindle Hours: 15.578h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: DMG MORI SLIMline multi-touch, number of slots in tool magazine: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine. Additional equipment • Direct path measuring system X axis • Chip tray • Hollow clamping device • Hydraulically movable tailstock via M-function • External electronic handwheel • DMG Mori IoTconnector • Machine includes tool holder, chuck and jaws Extra Information • Main spindle: a2-6 with ac motor • Hydraulic 3-jaw chuck diameter: 210 mm • Max. Bar capacity: 65 mm • Driven tools and c-axis for enhanced machining capabilities • 190 Spindle hoursMachine still under power Ledpfx Akjyyuv Tsfeaa

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Ledpoy Dq Hpofx Akfeaa Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. This is a used machine and therefore sold with exclusion of any warranty.

Condition: good (used), Year of construction: 1990, operating hours: 33,000 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 38 mm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Lathe Maho GR200 C Year of manufacture: approx. 1990 This is a nice, compact machine and I regret having to sell it. Power-on hours: approx. 35,000, spindle hours approx. 10,000, of which approx. 1,000 hours since the spindle bearings were replaced. The machine features automatic tool measurement using Tooleye (currently not in use). Collet chuck Röhm for diameters 3 to 42 mm. 8-position tool turret. VDI20 tool holder. Various tool holders with assorted tools included. The spindle module was renewed by Almendinger about four months ago. The machine is in very good condition; the axes and spindle run smoothly and without issues. Accuracy is excellent. The machine can be inspected and demonstrated under power at our premises. Sold with the accessories shown in the photos. Optionally, a three-jaw chuck from SMC Autoblock, Type KNCS 170/43 incl. various jaws and claw jaws, can be purchased separately. The three-jaw chuck is not included in the price. See photos. Lsdpfsyhbatsx Akfsaa

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Lasdeqn E U Tspfx Akfja

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm Laedpfx Ajycxihskfja total power requirement --- kW weight of the machine ca. 7,6 t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Lajdpfxexuqn Ss Akfea Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: good (used), Year of construction: 2014, Main spindle: Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Sub spindle: Spindle speed: 5,000 rpm Swing diameter: 42 mm Travel: Travel X1 / X2 / X3: 60 mm Travel X4: 130 mm Travel Z2: 80 mm Travel Z3: 80 mm Travel Z4: 340 mm Total weight: 3,500 kg Chip conveyor IEMCA bar feeder Radially driven tool holders Driven drilling and milling units 4-position basic tool holder, slide 3 Drilling and milling device Lodpfxjyt Dv Ie Akfjaa Axially driven unit Control system: Fanuc i31

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,612 h, spindle speed (max.): 18,000 rpm, overall weight: 11,600 kg, table width: 650 mm, table length: 800 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: 640, number of axes: 5, This 5-axis DMG MORI DMU 75 Monoblock was manufactured in 2015. It features an impressive X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and offers 60 tool positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 Monoblock universal machining centre we have for sale. Contact us for further details. • Power: 48 kVA • Rated apparent power: 35 kVA • Max input current: 70 A • Full load current: 80 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Spindle speed: up to 18,000 1/min • Tool interface: HSK • Tool magazine capacity: 60 positions • B-axis: -5° to +110° • C-axis: 360° • Table size: 800 mm (L) x 650 mm (W) • Machine Protection Control (MPC) • Infinitely variable speed control • Operating mode 3 Additional equipment • Scraper belt chip conveyor (chip conveyor) • Internal coolant supply • 40 bar coolant system with 600 l tank and paper belt filter • 40 bar IHK pressure relief valve • Coolant ring nozzle • Water jet gun / cleaning gun • Air cooling system through spindle center Laodpfxjyx D Dks Akfja • Mechanical oil and emulsion mist separator, 3 bar • Blum laser for tool radius and length measurement • Heidenhain TS 460 infrared touch probe • Handwheel • Climate control package • Documentation/manual • Preparation for automation/handling system • Extractor probe • Optional: Schunk zero point system and tools

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1800/2000/1100 mm Tool holder : HSK 100 In General: Year of manufacture:2007 Control system:Heidenhain iTNC 530 Ljdpfjyw Dngex Akfjaa Travel distances X/Y/Z:1,800/2,000/1,100 mm Rotational speed:12,000 rpm Media feed-through:Blast air + cooling lubricant Spindle: Technology:Motor spindle Speed:12,000 rpm Power:44 kW Torque:288 Nm Tool holder:HSK 100 NC swivel head: Technology:Universal milling head B-axis:0°-180° NC rotary table: Technology:Rotary table with pallet carrier C-axis:360° Clamping surface:1,600 x 1,400 mm Max. table load:4,000 kg Holding torque:approx. 17,000 Nm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct scales in all axes Chip disposal:Chip conveyor Coolant supply:Internal c oolant system, 40 bar Automation:2-fold pallet changer Workpiece measurement:Heidenhain touch probe Tool measurement:Blum Laser NT Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Emulsion mist separator:Mechanical

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Ledjxgk Nmopfx Akfsaa Taper : BT40 ATC 30 Immediate Delivery

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Touch screen . plant in very good condition . Lasdpfxoin Dkle Akfoa

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain greates pass round over bed 380 mm total power requirement --- kW Laodpfx Ajyb S Ihskfsa weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: new, Year of construction: 2018, Chip conveyor including pump, suitable for CTV 160 Lodpfx Ajy Amhyekfjaa

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min Lsdpfxsytfn Sj Akfjaa total power requirement 48 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: like new (used), Year of construction: 2019, For sale is a DMU125P duoBlock in like-new condition! The machine ran for only about 3,500 hours. - Immediately available - Worldwide Export Installation plans/transport data see photos. Construction year: 2019 Lodpfxeywukle Akfoaa Control: Heidenhain TNC640 Travel: X-1.250 mm, Y-1.250 mm, Z-1.000 mm table size: 1.250 x 1100 mm max. table load: 2.800 kg Milling head: A-axis -125 / + 35° x table: NC rotary table Spindle mount: HSK-A63 Spindle speed: max. 15,000 rpm tool magazine: 63 places Internal coolant supply (IKZ): 80 bar, frequency-controlled, suction, cooling device Blasluft probe: Heidenhain Measuring: 3D quickSET operating mode: 4 electric handwheel: Heidenhain Machine monitoring: MPC Machine Protection Control Linear axes X/Y/Z Rapid traverse speed: 60 m/min machine weight: 27.000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale: CNC Lathe GILDEMEISTER CTX 410 V3 with Driven Tools TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control System: Heidenhain 4290 Country of Manufacture: Germany Year of manufacture: 2006 The machine is fully equipped with fixed and driven tool holders. Machine specifications: - Turret: 12 tooling positions for VDI-30 tool holders (all stations driven) - Maximum spindle speed: 5000 rpm - C-axis - Driven tools - Tailstock - Maximum turning diameter X-axis: 320 mm - Maximum turning length Z-axis: 600 mm - Coolant system - Hydraulic collet chuck on main spindle (option to convert to 3-jaw chuck) - Through-spindle (spindle bore diameter: 66 mm) - Parts catcher - Chip conveyor Lsdpjyy S R Uefx Akfoaa - Full programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. 100% functional. Connected and ready for operation. Stal-Com has been specializing in the sale, servicing, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All our machines undergo thorough technical inspections. Our clients include not only Polish customers but also buyers from all over Europe and parts of Asia. Each machine can be inspected in production, as we also undertake machining services. After purchasing a machine from us, we provide staff training and can also set up part production at the customer's location. We cooperate on an ongoing basis with many companies to whom we supply successive machine tools.