Used Dmg Dmf 250 Linear for sale (402)

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. Ibodpfx Abeymcvmo Isb • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,317 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, total width: 1,630 mm, total height: 1,920 mm, overall weight: 4,350 kg, controller manufacturer: FANUC, controller model: Series 160i-8, product length (max.): 4,900 mm, number of axes: 8, This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details. Iedpfx Ajy E Nq Asb Iobb • Turning length: 120 mm • Turning diameter: 32 mm • Axis travels: • X1: 65 mm • Y1: 350 mm • Z1: 120 mm • X2: 265 mm • Y2: 235 mm • Z2: 320 mm • C1: 360° • C2: 360° • Spindle bore: 42 mm • Total power requirement: 34 kVA • Condition: Very good; connected and ready for testing Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle No

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: Iodpfeu Ivkgsx Ab Iebb - Available, on request.

Year of construction: 2012, operating hours: 38,984 h, condition: refurbished (used), machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter The price contains the machine itself, the cost of unassembly and the loading on truck. Iodok Ny R Djpfx Ab Ijbb Every other cost on your side.

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Ibsdpfet I Di Aex Ab Ieb Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 1,60,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Iodpfx Abjyzzb Se Isbb Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Ijdpfoyi Ekfsx Ab Ijbb Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package Ibjdsx D Nl Iopfx Ab Iob • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Year of construction: 2010, condition: new, Spare part for CNC BAZ Manufacturer: DMG MORI Ijdod S A Unjpfx Ab Isbb Type: DMF 220 Linea Parts are new. Ball screw for Y and Z axis. Guide rail kit for the complete X axis, including brake.

Condition: excellent (used), Year of construction: 2005, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed rate X-axis: 90 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 90 m/min, controller manufacturer: Heidenhain 530i, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 300 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 900 kg, table load: 900 kg, overall weight: 14,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 5-axis portal machining center, primarily used for 95% aluminum machining. The machine can be sold immediately. • Rapid traverse and feed rate: 90 m/min • Acceleration: 9 m/s² • HSK 63A / 18000 rpm • External nozzles / internal coolant system / air / 1000L coolant tank • Chip conveyor, can be inserted from either side • 5 axes simultaneous • 60 tool positions in the tool changer • Blum laser / dial indicator Isdpfozbbpzjx Ab Isbb • Brandkamp collision protection system • Indunorm pallet changer, 300 kg capacity • Plans and operating manuals for the machine and all other components • Includes 3 pallets, size 600 x 800 (since 2016) • Spindle overhauled in 2023, see attached document • Pallet transfer with Partool system (since 2016) + pallets • All axes with linear drives • Machine serviced annually, wear parts replaced

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Ibsdsxpg H Hopfx Ab Iob Rated power kVA: 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Isdpfx Aoy Thlnob Iobb Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Ijdsug Uc Nopfx Ab Iobb

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, rotational speed (max.): 5,000 rpm, controller model: Siemens 840D powerline, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Max. speed: 5,000 rpm MACHINE DETAILS Ibjdpfx Abeyzqtke Ieb Control: Siemens 840D powerline Electrical Data Apparent power: 50 kVA Rated current: max. 72 A Current: 80 A Mains voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Voltage: 24 V Operating hours: approx. 76,300 h Spindle hours: approx. 61,440 h EQUIPMENT Pallet circulation system Material conveyor belts for machined parts Chip conveyor Documentation/manual Note: The machine is sold without chuck, tools or raw part holders. Additionally, the seller can offer the following accessories: SMW KNCS225 chuck for €1,500 Ewab pallets (base pallets) 10 units for €500 Extension of transport belts for finished parts €2,000 Basic holder set VDI 40 suitable for the machine, 10 units for €1,000

Year of construction: 2010, condition: ready for operation (used), Turning machine CTV 250 - R Manufacturer: DMG Gildemeister Serial number: 6860000451 Operating hours: 46,491 Spindle hours: 30,748 Iedpfx Abei Ewq Sj Iobb Footprint: 4m x 3m Optional cooling unit for connecting two CTV 250 machines

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Isdpfxezx Ru Hj Ab Iebb Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Isdpfx Ajzy Hx Deb Isbb Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Ibsdpfxoz A Uz Ns Ab Iob Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,170 h, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 4,800 kg, number of axes: 2, CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 260 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details. • Machine type: CNC Turning Center • Year: 2014 • Made in: Japan • Serial number: NL252340704 • Max. turning diameter: 260 mm • Max. turning length: 795 mm • Rated power: 25 kVA • Machine connected and available for inspection/testing. • Main electronic connection: 200 V, 3-phase, 50 Hz Ibodpfx Abjz Akp So Ieb Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Iedpfjzy N Nljx Ab Iebb Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) Ijdpezx Rwzofx Ab Iebb X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,460 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 18,500 W, bar diameter (max.): 80 mm, controller manufacturer: MITSUBISHI, controller model: M-730BM(MAPPS 4), number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details. • Spindle 1: 18,5/15 kW, 4000 rpm; hollow spindle Ø 91 mm • Spindle 2: 11/7,5 kW, 6000 rpm; hollow spindle Ø 43 mm Ibjdozxpq Hjpfx Ab Ijb • Turret: Sauter 12-station with milling function, 6000 rpm • Y axis present • Stroke end detection • Bar feeder interface (prepared) Additional equipment • Automatic door (not original) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Isdjzmfxiepfx Ab Ijbb Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: excellent (used), Year of construction: 2001, Hello. I have a renowned brand of CNC milling machine CINCINNATI Arrow _ 1250 for sale. _ Type: CNC milling machine Manufacturer: CINCINNATI Model: Arrow _ 1250 Control: HEIDENHAIN TNC430 Year of manufacture 2000 _ Machine parameters: - tool magazine: 21 pcs. on SK40 / BT40 - max. rpm 8000/min. - max. travel in the X axis: 1262 mm - max. travel in the Y axis: 562 mm Iodpju Au Aksfx Ab Iobb - max. travel in the Z axis: 562 mm - workpiece measuring probe - cooling system through the spindle - measuring rulers in all 3 axes - spindle drive power: 11 KW - chip conveyor - DTR - machine weight: 6 tons THE MACHINE IS IN PERFECT TECHNICAL AND VISUAL CONDITION!!! _ WHY IS IT WORTH BUYING MACHINES IN PPM? - we have our own service _ stationary and mobile - we have already sold over 700 machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: used, Year of construction: 2008, operating hours: 82,646 h, functionality: fully functional, Dismantling, loading, and transport are the responsibility of the buyer. Ibjdpfx Abezzvvuj Iob Sale excludes extraction equipment. Sale excludes tools and attachments. Sale is limited to within the EU.