Used Dmg Dmu 60 Monoblock for sale (405)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails Klsdpfx Adsyaqgyjwol - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations Kljdpfxjyaqczo Adwel - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), Year of construction: 2012, Control Heidnehain 620. Cooling threw spindle. New spindle in 2021. New srews on Z + Y in 2025. Probes, chip conveyor. Table 790 x 560 mm X axe 635 mm Y axe 510 mm Z axe 460 mm Number of tools 24 ISO 40 spindle revolutions ... 20 - 12.000 rpm Kledpfex Sqrnox Adwsl machine dimensions 2500 x 2000 x 2500 mm machine weight 3 900 kg

Condition: ready for operation (used), Year of construction: 1996, controller manufacturer: FANUC, controller model: na, number of axes: 2, This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Distance between centers: 180–500 mm • Turning diameter: 150 mm • Swing over saddle: 430 mm Extra Information Kledpfx Ajyalmzsdwsl Machine still under power

Condition: used, Year of construction: 2001, turning diameter / mm Kledpfx Aox Tu Suodwjl turning length / mm control / total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,500 mm, total length: 5,000 mm, total width: 3,500 mm, table width: 500 mm, table length: 630 mm, DMG DMC 80 H Hi-Dyn RS4 For sale is a horizontal machining center DMC 80 H hi-dyn RS4. The machine is in good condition. Technical Specifications Travel distances: X-axis: 800 mm Kledpfx Ajx Uq Saedwel Y-axis: 800 mm Z-axis: 800 mm Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid-cooled Speed ranges: Automatic mode: 0–6,000 rpm Setup mode: 0–800 rpm Manual mode: 0–5,000 rpm Max. speed: up to 8,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle On request, dismantling, loading, and transport within Europe can be organized for an additional charge. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell? For further information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, This 4-axis DMG Mori Seiki NVX-5100 II was manufactured in 2013. It features a Fanuc control unit, a table size of 1350 x 600 mm, and a maximum table load of 1100 kg. The spindle operates at 12,000 rpm with a motor power of 15 kW. It includes a 60-tool magazine, rapid traverse speed of 30,000 mm/min, and a Daikin oil cooler. Consider the opportunity to buy this DMG Mori Seiki NVX-5100 II vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Spindle speed: 12000 rpm / spindle motor power: 15 kw • Rapid traverse speed: 30000 mm/min • Max load on table: 1100 kg • Dimensions: 1350 x 600 mm • Tool magazine capacity: 60 tools / tool change time: 0. 5 sec / chip-to-chip time: 5 sec • Cooling system: daikin oil cooler Klodpfx Ajyaipysdwel • Prism guides with automatic oil lubrication / renishaw tool measurement / automatic tool collision protection / automatic force and torque control / usb/pcmcia/rs232 ports / chip extractor system • Weight: 6400 kg

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, total height: 2,600 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: CELOS with Siemens 840D sl Operate, number of axes: 3, This 3-axis DMG MORI CTX 2500/1250 Horizontal turning machine was manufactured in 2018. Ideal for complex machining tasks, it combines turning and milling capabilities in one machine. Consider the opportunity to buy this DMG MORI CTX 2500/1250 Horizontal turning machine. Contact us for more information. Additional equipment • Counter spindle turnMASTER 6 inch, ISM 36, Y-axis / C-axis and spindle brake (hydr.) / Reinforced coolant pump (5 - 20 bar) / Hinged belt chip conveyor / Tool measuring device in the work area (automatic, Ø 315 mm) / 12-station star turret, VDI 40 with quick-change system (TRIFIX) / Tool revolver completely replaced in December 2024 / Machine comes without chuck • Turret: Number of tool stations: 12 / Number of driven tool stations: 12 / Max. speed: up to 6000 rpm /Max. power (100% ED): 10 kW • Shank diameter according to DIN 69880: 40 mm • Off-center turning and milling / Milling of gearing using the hobbing process / Alternating speed technology cycle / Polygon turning (machining of elliptical and polygonal shapes) / Program status control / Gear skiving (technology cycle for gears) / Multi-thread cycle 2.0 (position-oriented threads) / Easy Tool Monitor 2.0 (tool monitoring system) / Energy meter for Siemens 840D sl OP CELOS / Hydraulic hollow clamping device Ø77 mm Machine Benefits Technical Machine Benefits • Torque (100% ed): 410 nm / max. Torque (40% ed): 525 nm Kjdpfx Aeyailusdwell • Circumferential diameter above bed: 710 mm / face travel: 260 mm / longitudinal stroke: 1345 mm • Max. Chuck diameter: 315 mm Dimensions Machine Depth 5400 mm

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: SIEMENS, controller model: 840D Powerline, This DMG Gildemeister Twin 65 was manufactured in 2004. It features a Siemens 840D Powerline control, 2x Sauter revolver with 12x VDI 30 each, and a revolver 1 with Y-axis. It includes a parts pick-up device, belt filter system, coolant tank of 980L with 20/40 bar, and a bar loading magazine IRCO Profimat 65. Reach out for more information about this machine. Additional equipment • Parts pick-up device NC controlled • Belt filter system with coolant tank 980L with 20/40 bar • Bar loading magazine IRCO profimat 65 • Bar passage max. 65mm • Bar length 3000mm • Various tool holders Machine Benefits Technical Machine Benefits • 2x sauter revolver with 12x vdi 30 each • Revolver 1 with y axis Kjdpjyaik Rsfx Adwjll Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Klsdsx Stl Depfx Adwol Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2023, operating hours: 3,751 h, functionality: fully functional, turning length: 700 mm, turning diameter: 356 mm, spindle speed (min.): 6,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, DMG MORI NLX2500/700 universal lathe with Y-axis, bar feeder, and driven tools. Main and sub spindle. Spindle bore diameter: 81 mm. INCLUDING tool package (purchase price €64,000 / see attachment). Kljdpfx Aox Sp Izedwol

Condition: good (used), Year of construction: 2004, operating hours: 1,56,897 h, functionality: fully functional, machine/vehicle number: 6006285, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC 426/430, workpiece weight (max.): 7 kg, table width: 800 mm, table length: 1,250 mm, table load: 1,200 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, For sale is a vertical CNC machining center, DMG DMC 100 V. The machining center is in good condition. Vertical CNC Machining Center DMG DMC 100 V Technical Data Travel & Work Area X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 500 – 600 mm Table Table size: 1,250 x 800 mm Max. table load: 1,200 kg T-slots: e.g. 14 mm Kljdex Tqr Rjpfx Adwol Spindle & Performance Max. spindle speed: 18,000 rpm Alternative speeds: 8,000 – 15,000 rpm Spindle taper: SK 40 or HSK-A 63 Spindle power: 15 kW Operating Hours: Control on: 156,896 hrs Machine on: 103,327 hrs Program run: 48,388 hrs Spindle runtime: 46,398 hrs Tool changer: 1,431 hrs Tool Magazine & Change Number of tool stations: 30 pcs. Max. tool weight: 7 – 12 kg Coolant supply: Internal coolant Control & Weight CNC control: Heidenhain TNC 426/430 Machine weight: approx. 12,000 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine. Additional equipment • Electronic handwheel • Operating mode 4 Kodsyaau Tspfx Adwell • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Measuring probe Renishaw OMP 60 • Chip flushing gun Machine Benefits Technical Machine Benefits • Tool holder: hsk 100 • Tool positions: 270 / 360 • Number of pallets: 2 • Pallet size: 800 x 800 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 Extra Information Machine still under power Kedoyaaugepfx Adwell

Condition: ready for operation (used), Year of construction: 2006, operating hours: 40,396 h, controller manufacturer: SIEMENS, controller model: 840D powerline, This DMG Gildemeister CTX410 was manufactured in 2006. It features a spindle speed of 5,000 RPM, a 12-position tool turret, and live tools in 3 positions. The through-hole diameter is 65 mm. Consider the opportunity to buy this DMG Gildemeister CTX410 horizontal turning machine. Contact us for more information. • Tool turret: 12 positions • Live tools: 3 positions Kedpfxex U S Eno Adwoll • Through-hole: 65 mm • Delivery time under consultation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. • Tools: 30 pcs • Incl tools shown on the pictures Kledpfx Asx U D Hqodwsl • Excl barfeeder

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Technology:Geared spindle Speed:8,000 rpm Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping NC swivel head: Kodpswx A Hqofx Adwsll Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Kjdpfex Ih Rtex Adwsll Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. Kjdsx Tg S Tepfx Adwell CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Ksdpfxoyac Tle Adwell Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Coolant: external only; no internal coolant • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor: not included • Internal coolant: not available (external coolant supply only) Dimensions Machine Depth 2050 mm Kljdpfx Asx D D Htodwjl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Kljdpfx Adox D Epcewsl Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 1990, operating hours: 30,912 h, This 5-axis DMG DECKEL MAHO MH 800 E2 was manufactured in 1990. It features a semi-cabin splash guard, an adaptable control unit with power unit, an electrical cabinet, a MAHO vertical tool changer, an NC rotary table, and an electric manual control panel. Consider the opportunity to buy this DMG DECKEL MAHO MH 800 E2 universal machining centre. Contact us for more information about this machine. • Splash guard cabin (semi-cabin) • Control with adaptation and power unit, including electrical cabinet • Interface for connecting peripheral devices • MAHO vertical tool changer • NC rotary table • Electric manual control panel • Precision/positioning: • Position tolerance T_P: 0.020 mm • Position uncertainty P_a: 0.015 mm Kledpfx Ajx D Hqzjdwol • Reversal span U: 0.005 mm • Position scatter: 0.005 mmAdditional equipment • Damping plates

Condition: good (used), Year of construction: 2021, operating hours: 2,400 h, functionality: fully functional, 2-axis universal turning center with driven tools, C-axis, Y-axis, and sub-spindle Machine in extremely well-maintained condition Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axes Chip container Hydraulic hollow clamping cylinders, max. bar capacity Ø80 mm Sub-spindle A2-6" with ISM 52 spindle motor, power 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis travel ± 60 mm DMG MORI IoTconnector Kljdpfxsx Tg I Ue Adwol Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Workpiece catcher up to Ø80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loader (DMG MORI standard) Chip conveyor on right side 4-color signal tower Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Bore passage Ø78 mm (limits bar capacity to Ø78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Bore passage Ø66 mm Draw tube inner diameter Ø52 mm Sub-spindle options External chuck washing Pneumatic ejector with internal coolant supply Coolant / chip removal 12 bar high-pressure system with dual filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Manual tool probe MARPOSS General options Parts conveyor front left instead of parts bin Conveyor outside working area Chuck jaw options Set of soft jaws for BB-D 210 (3 pcs per set, 3 sets) Set of soft jaws for BB-D 250 (3 pcs per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle Alternating Spindle Speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Special equipment / accessories Hydrafeed MSV 80 with floor rails, bar feed magazine, and modifications Swarf bin (Model 350) VDI40 holders with multiple seats D1 (2 pcs) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pcs) VDI40X25X100 25Ø boring bar holder (1 pc) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Parting tool holder H=32 mm, VDI40, universal gearing (1 pc)

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min travel -x1 axis 165 mm travel -z1 axis 220 mm Kledpfx Aexbtqiodwjl travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65