Used Dmg Mori for sale (184)

Condition: good (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, turning length: 1,530 mm, turning diameter: 670 mm, spindle bore: 91 mm, travel distance Y-axis: 300 mm, rotational speed (min.): 4,000 rpm, Equipment: rotational speed infinitely variable, DMG NTX2500 / 1500mm 2nd Generation Spindle Standard Spindle 1 turnMASTER FANUC specification. Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW Maximum spindle speed: 4,000 rpm Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm Spindle through-hole diameter: ø91 mm Bar capacity: ø80 mm Standard Spindle 2 turnMASTER FANUC specification. Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW Maximum spindle speed: 4,000 rpm Kedpfsxp H Rrsx Acwjnd Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm Spindle through-hole diameter: ø91 mm Bar capacity: ø80 mm Control Control F31iB5 with CELOS CELOS - ERGOline Touch panel Chuck for Main Spindle KITAGAWA 12-inch Hollow Power Chuck B-212A821H Chuck for Counter Spindle (Spindle 2) KITAGAWA 10-inch Hollow Chuck BB210A821 Tool Spindle Standard tool spindle, 12,000 rpm, 23/22.2 kW (FANUC) Capto C6 Standard full indexing specifications Maximum torque: 116/89 (40%ED/continuous) Nm Tool Magazine Tool storage capacity: 76 tools (Capto C6) Coolant Supply Knoll KF1100/700 compact filter system 7.0 MPa Special Configuration Through-tool spindle air blow (Lubricator added, spindle can rotate, switching between coolant and air) Long tool stocker (3 tools, ø63mm×L600mm, C6, 8 kg each, above sub spindle/tailstock) • Tool magazine capacity: 3 tools • Max. tool diameter: ø63 mm • Max. tool length: L600 mm • Max. tool weight: 8 kg • Max. tool moment: 7.84 Nm (from gauge line) Automatic door Highlights - Simultaneous 5-axis machining with Direct Drive Motor (DDM) on the B-axis. - The compactMASTER, the world’s shortest tool spindle in its class (350 mm), offers a large working envelope for higher productivity. - Wide machining area with X-axis travel of 675 mm (-125 ~ +550 mm) and Y-axis travel of 300 mm (±150 mm) - Y-axis travel of ±40 mm on Turret 2 extends machining range - Minimal footprint of 16.5 m² (5,825 × 2,830 mm) in its class for workpieces up to ø670 × 1,530 mm - 6-sided machining with Spindle 2 enables complete component machining in a single setup

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of spindles 1 Spindle speed range 4000 This DMG MORI NLX 2500 Y / 700 was manufactured in 2022. A robust horizontal turning machine, with Y axis and live tooling, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500 Y / 700 horizontal turning machine. Contact us for more information. Ksdpjxb E H Aofx Acwond Application Types Turning

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm Knjdpfx Acov Htitewod max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2012, operating hours: 3,540 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Siemens, controller model: 840D SL, table load: 300 kg, spindle speed (max.): 24,000 rpm, spindle nose: BBT Big+, number of slots in tool magazine: 25, Equipment: documentation/manual, DMG Mori Milltap 700 machine for sale, in new condition. Kedpfxoxghpwj Acwond Siemens 840 D SL control. We bought the machines because of the small space requirement, 24,000 spindle, fast tool change and 60 meter rapid traverse. The machine can be viewed and tested under power. We can help with packaging and loading onto a truck.

Condition: excellent (used), Year of construction: 2024, operating hours: 2,111 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table width: 1,100 mm, table length: 560 mm, rotational speed (max.): 12,000 rpm, Vertical Machining Center DMG MORI CMX800V YEAR 2024 FANUC-0iMF Table: 1100x560mm, X800 Y560 Z510mm 12,000 rpm, BT40, ATC30 Ksdpfx Acsxgcubjwond

Condition: used, Year of construction: 2016, BAZ DMC850V, year 2016 CNC milling machine DMG Mori 30-position tool changer DMC850V 3-axis Knjdpfx Acjw E Emgswsd Control type: Sinumerik 840 D Required space: 4x4x2.8 m Table size: 1150 mm x 600 mm Year of manufacture: 2016 Travel paths: X=850 mm, Y=520 mm, Z=475 mm CE certified Operating hours: 16,637 h Spindle hours: 10,477 h CNC

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Knjdpophlviofx Acwsd

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, General Data Machine weight 27750 kg Kedpfx Aoxllmdjcwsnd Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 10000 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 2600 mm Y-Axis Movement 1100 mm Z-Axis Movement 900 mm Table Table load 4000 kg This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2008, MACHINE SPECIFICATIONS X travel: 1035mm Y travel: 560mm Z travel: 510mm Rapid traverse X/Y/Z: 25m/min Feed: 20m/min Table dimensions X: 1200mm Table dimensions Y: 560mm Maximum table load: 1000kg Spindle speed: 9000rpm Power: 13kW, torque: 83Nm Tool holder: SK40 Knjdoxq Hbtepfx Acwjd Tool positions: 20 Maximum tool diameter: 80mm/130mm Maximum tool length: 300mm Maximum tool weight: 6kg Machine dimensions X: approx. 4000mm Machine dimensions Y: approx. 4000mm Machine dimensions Z: approx. 2500mm Weight: approx. 4100kg Control: FANUC 32 Operating hours: 23918h Processing hours: 11991h Including chip conveyor DMG EcoLine UNO 115 tool presetter Probe tool

Condition: excellent (used), Year of construction: 2002, operating hours: 69,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 69 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840D powerline, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 800 mm, table load: 800 kg, overall weight: 10,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,000 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Kedev Eurmepfx Acwend Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance + Transport and commissioning can be offered separately

Condition: excellent (used), Year of construction: 2016, operating hours: 30,380 h, functionality: fully functional, machine/vehicle number: 8104000143B, spindle motor power: 2,200 W, turning length: 180 mm, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, bar diameter (max.): 20 mm, power: 2.2 kW (2.99 HP), 2016 DMG MORI SPRINT 20/5 SWISS TYPE CNC LATHE + IEMCA SMART 320 BARFEEDER Complete machining of workpieces measuring up to ø 20 × 600 mm in a footprint of under 2m² Condition Used - Good Location Turkey Knedpfx Asuy R Nzscwod Automatic turning with 5 linear axes and up to 2 C-axes Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Max. X-axis stroke 50 mm Max. Y-axis stroke 325 mm Max. Z-axis stroke 60 mm Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Max. X-axis stroke 50 mm Max. Y-axis stroke 325 mm Max. Z-axis stroke 60 mm FANUC 32I Control Main spindle with 10,000 rpm, 14 Nm, 2.2 kW (nominal) Counter spindle with 10,000 rpm, 4.8 Nm, 1.5 kW (nominal) SWISSTYPEkit optional for short and long part turning on one machine Total of 23 tool stations Up to 6 driven tool stations, 4 driven tool stations as standard, 2 driven stations for back-working optional Driven tools spindles 6,000 rpm, 1.43 Nm, 0.9 kW (nominal) Control panel with 10.4" color display and FANUC 32i 2 control channels, 5 linear axes and up to 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously ADDITIONAL ACCESSORIES (INCLUDED IN THE PRICE) 2016 IEMCA SMART 320 BARFEEDER (The SMART 320 is an automatic high-performance bar feeder for working with sliding headstock lathes with bar diameters between 3 and 20 mm and lengths from 1,500 to 4,060 mm. The Smart is a bar feeder that is simple to use and fast. BAR CHANGEOVER TIME 19 sec.) and collets with channel set, vibration kits. Chip Conveyor 70 bar high pressure pump and distributors. Long Part kit and table. Part Conveyor Parts Catcher and box Live Tooling Changing kit from steady to sliding headstock Counter spindle collet cleaning Kit for machining with soluble water coolant Signal lamp 4 colors Transformer Standard and driven tools kit.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Counter spindle stroke X2 / Z2: mm 220 / 170 Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Ksdpfjwifrkjx Acwond Torque (S3 40% / S1): Nm 2.5 / 2

Condition: excellent (used), Year of construction: 2023, 5-Axis Machining Centre Brand: DMG MORI Model: DMF 300/8 Year: 2023 (1,600 spindle hours) CNC: Heidenhain Celios iTNC640, 21.5'' screen Equipped with: • Integrated rotary table diameter 800 mm / 800 kg • Spindle 46/30 kW – 15,000 rpm • 90-position tool changer Kjdpfjxl Ufcox Acwend • LEHMAN EA520 rotary indexer with tailstock • BLUM LC50 laser • PP60 Infrared probe • Through-spindle coolant 40 bar • Central paper filtration unit 980 litres • Automatic doors • Chip conveyor Specifications: • Table size: 3,300 x 850 mm • X-axis travel: 3,000 mm • Y-axis travel: 800 mm • Z-axis travel: 850 mm • B-axis: -/+110° • C-axis: 360.000° • Spindle speed: 2 - 15,000 rpm • Spindle power: 46/30 kW • Spindle taper: SK 40 Big Plus • Rapid traverse X/Y/Z: 50 m/min • Machine dimensions approx.: 11,150 x 6,500 x H 2,650 mm • Weight approx.: 23,500 kg

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 2070 mm Measurements depth 5400 mm Measurements height 2600 mm Machine weight 7800 kg Control Unit Brand SIEMENS Model CELOS with Siemens 840D sl Operate Main Drive Spindle speed range up to 4000 rpm Spindle motor power 22 kW Number of axis 3 Additional Equipment Counter spindle turnMASTER 6 inch, ISM 36, Y-axis / C-axis and spindle brake (hydr.) / Reinforced coolant pump (5 - 20 bar) / Hinged belt chip conveyor / Tool measuring device in the work area (automatic, Ø 315 mm) / 12-station star turret, VDI 40 with quick-change system (TRIFIX) / Tool revolver completely replaced in December 2024 / Machine comes without chuck Turret: Number of tool stations: 12 / Number of driven tool stations: 12 / Max. speed: up to 6000 rpm /Max. power (100% ED): 10 kW Shank diameter according to DIN 69880: 40 mm Off-center turning and milling / Milling of gearing using the hobbing process / Alternating speed technology cycle / Polygon turning (machining of elliptical and polygonal shapes) / Program status control / Gear skiving (technology cycle for gears) / Multi-thread cycle 2.0 (position-oriented threads) / Easy Tool Monitor 2.0 (tool monitoring system) / Energy meter for Siemens 840D sl OP CELOS / Hydraulic hollow clamping device Ø77 mm This 3-axis DMG MORI CTX 2500/1250 Horizontal turning machine was manufactured in 2018. Ideal for complex machining tasks, it combines turning and milling capabilities in one machine. Consider the opportunity to buy this DMG MORI CTX 2500/1250 Horizontal turning machine. Contact us for more information. Application Types Kodpfx Acsw Ul D Njwond Turning

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union Knodpfx Acoxgnz Towsd - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Knedpfx Acew T Sqyjwsd Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Condition: good (used), Year of construction: 2014, 1 used tool presetting device Make: DMG Mori Model: UNO 20/40 Year of manufacture: 2014 Technical details Measuring range X-axis: 200 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 400 mm Kjdpfxsw Sklts Acwjnd Overall width: 510 mm Overall length: 1,300 mm Overall height: 1,800 mm

Condition: used, Year of construction: 2010, DMG MORI SEIKI year 2010 3 axis machine Type: DuraTurn 310 eco control: MSX 853 MAPPS IV C axis live tools turning diameter 228 mm turning lenght 393 mm turret sauter VDI30 tailstock tool probe chuck kitagawa 210mm Knodoqiz Tiopfx Acwod spindle bar capacity 51mm weight machine 3500kg equipment;chip conveyor with coolant tank and pumps 3 live tool holder WTO 4 normal holder vdi30 books machine

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz - Fuses: 33 A Pneumatics Kedoxdiarjpfx Acwjnd - Compressed air connection: 6 bar

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Ksdpfx Aow S N Igjcwjnd Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Knodewvr Tnepfx Acwed Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm Kjdpfx Acew T Sn Eewsnd CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Kodpfexf Ii Ujx Acwend

Condition: like new (used), Year of construction: 2021, functionality: fully functional, turning length: 317 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 375 mm, rapid traverse X-axis: 30 m/min, Model: ALX 2000/300 Rev 1 Year: 2021 Condition: Very good, low hours, regularly maintained CNC Control: MITSUBISHI M730 UM, latest-generation CNC system, intuitive interface Automatic door Clamping stroke sensor validates correct workpiece clamping before machine start Complete technical documentation Options: Automatic turret, integrated cooling system Knjdpfsxg Ru Nex Acwod Highlights: Robust and reliable machine, perfect for machining complex parts Up-to-date maintenance, ready to use Ideal for small and medium series

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) B axis: 240° Turret 2: X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Knodpjw T Snfjfx Acwsd Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment.