Used Dmg Nef 400 for sale (413)

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 Psdpophlviofx Aa Dsgg 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, SIEMENS 840D control with B + C axis Working travels 500 x 450 x 400 mm Table swivelling +110°/-5° Pjdpfx Aeuy R Sija Degg Table rotating 360° Spindle taper SK40 Spindle speeds -10'000 rpm tool changer 16 pos. Zero point clamping system GOODJ Lock 110 Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2016, DMG Mori Ecomill 600 V Year of manufacture: 2016 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 210 mm Control: Siemens 840D SolutionLine Spindle taper: SK 40 Spindle speed: 12,000 rpm Through-spindle coolant (IKZ) Chip conveyor Table size X: 900 mm Pedox Tn R Dopfx Aa Dsgg Table size Y: 560 mm Max. workpiece weight: 400 kg Tool changer: 30 positions Feed rate: 30,000 mm/min

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import Pedpfx Aajx Sqpto Djgg   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Psdpfjv T Rtisx Aa Djgg Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: good (used), Year of construction: 2013, 1 used tool presetter Manufacturer: DMG Type: Microset Vio 210 Year of manufacture: 2013 Serial no.: 99510021418 X-axis measuring range: 410 mm Z-axis measuring range: 465 mm With workbench, under-table, 1,400 mm wide, integrated telescopic drawer cabinet, 5 drawers, with 15" Terra monitor, keyboard, mouse, and Dymo 450 label printer Pgsdoqzgw Ajpfx Aa Deg

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6800 kg Control Unit Brand SIEMENS Psdox H Uziopfx Aa Djgg Main Drive Number of axis 3 Movement X-Axis Movement 640 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2002. It features a 640 mm X-axis, 600 mm Y-axis, and 500 mm Z-axis. The table size is 850 x 600 mm, equipped with a 30-tool magazine and SK40 taper. It operates with a Siemens control system and weighs 6,800 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,230 h, Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 635 mm Z-Axis Movement 460 mm Y-Axis Movement 510 mm Pgsdpfx Aaox H Uzpe Dog This 3-axis DMG DMC 635 V eco was manufactured in 2009. It features a table size of 790x560 mm and a spindle speed of 8000 RPM, controlled by SIEMENS 810D. X-axis travel is 635 mm, Y-axis is 510 mm, and Z-axis is 460 mm. If you are looking to get high quality milling capabilities consider the DMG DMC 635 V eco machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2014, Opportunity to buy a DMG vertical machining center from 2014 in very good condition, with 23571 spindle hours. Immediately available for delivery (in Europe as well). Pjdpfx Aaew Spqhj Djgg Extra: Direct measuring system X, Y, Z - inclusive air purge for measuring system Electronic handwheel Active cooling unit for electrical cabinet additional ventilator for control panel actice cooling unit for motor spindle Video available on request. X-AXIS Movement 635 mm Y-AXIS Movement 510 mm Z-AXIS Movement 460 mm Tabel dimensions 790 x 560 mm Max spindle speed 12000 rpm Tool changer 20 places Tool taper SK40 Cnc Control Heidenhain TNC620 - Slimline panel Tool clamping BT40 , for pull studs DIN69872 Spindle hours 23571

Condition: used, Year of construction: 2015, x-travel 635 mm y-travel 510 mm z-travel 460 mm Pjdpfxjwm Rtbe Aa Dogg Control DMG

Condition: used, Year of construction: 2017, x-travel 500 mm y-travel 450 mm z-travel 400 mm Pgsdpewm Rthsfx Aa Djg Control DMG MORI

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 700 mm Pjdpfx Aaexiy Ans Degg z-travel 550 mm Control Heidenhain TNC 530

Condition: used, Year of construction: 2017, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (max.): 14,000 rpm, CNC Heidenhain 640 WORKING AREA: X-axis: mm 1.450 Y-axis: mm 700 Z-axis: mm 550 Pjdpfxeya Imqj Aa Djgg Rapid traverse (X/Y/Z): m/min 42 Max. spindle speed: Rpm 14.000 Tool holder: SK 40 Tool magazine capacity: 30 Table size: mm 1.760 × 750 Max. table load: kg 2.000 Equipped with: • HEIDENHAIN 640 CNC • DXF file reader • Preparation for the fourth axis • Tool setter • Heidenhain workpiece measuring probe • 40 bar through-spindle high-pressure coolant system with paper filtration tank, 600-liter capacity • Air conditioning unit • 30 position tool magazine • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2012, DMG DMC 1035 ECO Machining Center DMG DMC 1035 ECO with Siemens Sinumerik 810 D powerline control system, year of manufacture 2011, in excellent original condition. Pjdpfoyat Tvex Aa Dogg The machine comes from the training workshop of a renowned German mechanical engineering company. CE-compliant!! Technical data: X-axis travel: 1,035 mm y-axis travel: 560 mm z-axis travel: 510 mm CNC control: Siemens Sinumerik 810 D powerline Table size: 1200 x 560 mm Maximum table load: 1000 kg Spindle taper: SK 40 Spindle speed: 10,000 rpm Spindle motor power: 13 kW Feed rate steplessly adjustable: 20,000 mm/min Rapid traverse: 25 m/min Tool changer capacity: 20 positions Coolant system with through-spindle coolant (IKZ): 20 bar Operating voltage: 400 V Total power requirement: 17 kVA Machine weight: approx. 4.1 t Dimensions (L x W x H): approx. 2.55 x 2.30 x 2.25 m Chip conveyor: 3.90 x 0.95 x 1.60 m Equipment: - Control unit: Siemens Sinumerik 810 D powerline - Electronic handwheel - Chip conveyor - Through-spindle coolant (IKZ) 20 bar About the machine: Offered here is a DMG DMC 1035 V machining center equipped with a Siemens Sinumerik 810 D powerline control. This machining center is in excellent original condition and was only used for training purposes in a facility. The control system is very user-friendly. The guideways are lubricated regularly via a central lubrication system. The DMG DMC 1035 V has been both mechanically and electrically tested by us. Take the opportunity to view and test the DMG DMC 1035 V under power at our facility. You will find further milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions Pgjdjx Icyvspfx Aa Dsg -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2002, operating hours: 24,396 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our 4-axis machining center DMG (DMC 64 V linear) is currently for sale. • Control system: Heidenhain iTNC 530 • The machine is in good condition, fully operational, and can be inspected under power on site. • The machine is equipped with a full-fledged 4th NC axis (rotary table by Nikken). • The machine has an additional M-function: "Compressed air cooling through the spindle." • Chip conveyor included. • We have a factory-overhauled milling spindle in stock as a spare part, which can be purchased for an additional charge if needed. • The tools and clamping devices shown in the pictures are not included in the sale. Pgodpfxjyacitj Aa Djg • We are extremely satisfied with the machine’s precision and reliability. • The machine is available at short notice. • Dismantling and loading of the machine can be organized by us upon request for an additional fee.

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Including bar feeder Including documentation Pgedpfxox Nnbhs Aa Djg

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI Machining Center Type 635 V ECOMILL Pgjdpfxsx R Tqws Aa Djg Year 2013 CNC DMG Siemens With through-spindle coolant With chip conveyor Equipped with linear scales on every axis Comes with workpiece probe and tool probe The screen operates with a computer mouse

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Podpfx Aasx D Hpwe Dsgg Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm Psdpfx Aajvw Ackj Djgg - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible. Pjdex U Dwispfx Aa Djgg

Condition: good (used), Year of construction: 2010, operating hours: 54,500 h, functionality: fully functional, machine/vehicle number: 15435720734, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain 530, controller model: 530, spindle speed (max.): 14,000 rpm, operating hours of spindle: 12,000 h, Equipment: chip conveyor, Machine will be available from 03.2026 Equipment DMU 70: with Erova 10-position changer Spindle 14,000 rpm Heidenhain 530 3D probe Heidenhain TS649 DMG 30 tools / SK 40 Simultaneous rotary table Purge air Chip conveyor Handwheel Folding roof The long 0-point clamping system can be taken over for an additional charge. Pgsdpfxjyab Rij Aa Djg

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Pgodpfx Aox D Eh Eja Djg Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2013, operating hours: 37,750 h, functionality: fully functional, machine/vehicle number: 1217000076 3, travel distance X-axis: 1,130 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain 530, table load: 1,000 kg, rotary table diameter: 1,240 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,000 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 400 mm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMU 105 Monoblock 5-axis machining center Spindle 18,000 rpm – at 24,687 operating hours, a new spindle was installed. Current spindle operating hours: approx. 4,000 h Pgsdpsyabm Refx Aa Dsg Machine will be available from 03/2026. Heidenhain iTNC 530 HSCI 60-position tool magazine, SK40 Paper band filter, high-pressure coolant 40 bar/23 Blum tool measuring system 3D probe Heidenhain TS649 DMG 3D Quickset extension package Blum tool measurement Wireless measuring probe Heidenhain TS 649 DMG Coolant ring nozzle Rinsing gun with pump Spindle center air blast cooling system Application Tuning Cycle (ATC) Electronic handwheel, iTNC 530 Operating mode 4 The sales price includes 150 SK40 tool holders. Machine is still connected and can be inspected at any time. Lang zero-point clamping plate can be purchased at additional cost.

Condition: ready for operation (used), Year of construction: 2018, 5-AXIS Machining Centre Brand: DMG MORI Model: DMF DMU 50 3rd Year: 2018 (spindle hours: 4,900) Control: Siemens 840D CELOS Equipped with: Integrated rotary table dia. 600 x 500mm / 300kg Spindle 21 kW – 15,000 rpm Tool changer with 60 positions Probe TS 649 Pgedpoyb Drfsfx Aa Djg 3D quickset Through-spindle coolant 40 bar Tool probe Coolant gun Chip conveyor Specifications: Table surface: 600 x 500 mm X-axis travel: 650 mm Y-axis travel: 520 mm Z-axis travel: 475 mm B-axis: -35/+110° C-axis: 360.000° Spindle speed: 20 - 15,000 rpm Spindle power: 21 kW Spindle taper: SK 40 Rapid traverse XYZ: 42 m/min Machine dimensions with conveyor: 3440 x 2850 x H 2750 mm Approximate weight: 7,480 kg