Used Doosan Crawler Excavator for sale (326)

Condition: used, Year of construction: 2011, x-travel 600 mm y-travel 560 mm z-travel 565 mm Control Fanuc Series 32-i MODEL A spindle tunring speed 8.000 U/min tool taper BT 40 spindle hours ca. 11.298 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Commissioning: 2016 Technical Features & Accessories: - Interchangeable plates/table Accessories, tools, and clamping devices shown are only included if noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Isdpox Ik S Hsfx Adweal

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Iajdpex D Igdsfx Adwel Application Types Milling

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Iaedpfxox Hy R No Adwol Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Iaodjx Ryrhjpfx Adwol Machine weight: 4,750 kg.

Condition: good (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller model: Fanuc, Catalog No. : 7960 Type: DNM 4500 Producer: DOOSAN Made in: 2022 Characteristic: Control system: Fanuc Hours on: 2471 h Length of the working table: 1000 mm Width of the working table: 450 mm X-Axis travels: 800 mm Y-Axis travels: 450 mm Z-Axis travels: 510 mm Machine weight: 5000 kg Ijdpfeuxcd Uex Adwoal

Condition: excellent (used), machine/vehicle number: FDA0D-2740-14837, Year of construction: 2021, operating hours: 942 h, lifting height: 4,800 mm, free lift: 2,100 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 210 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Johanny Hendrikse for more information Iaedpfxjx Sb S Se Adwol

Condition: used, Year of construction: 2014, control Fanuc i-Serie turning diameter 320 mm turning length 305 mm greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 330 mm turning speeds 6.000 U/min spindle bore 53,3 mm Number of tools 12 St. auto power on hours ca. 39.183 h spindle hours ca. 8.379 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Ijdpfxsx Ik Sye Adwsal Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2022, operating hours: 1,025 h, condition: ready for operation (used), General Data Measurements width 1620 mm Measurements depth 2795 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand FANUC Main Drive Spindle speed range 4000 rpm Spindle motor power 15 kW Number of axis 2 Movement X-Axis Movement 175 mm X-Axis Rapid Traverse 30 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 36 m/min Turret Number of turrets 1 This DOOSAN Lynx 235II was manufactured in 2022. A robust horizontal turning machine featuring a 8 inch chuck, it handles a max turning diameter of 320 mm and length of 525 mm. With a bar working diameter of 65 mm and rapid traverse rates up to 36 m/min, it's ideal for efficient operations. If you are looking to get high quality turning capabilities consider the DOOSAN Lynx 235II machine we have for sale. Contact us for more information. Application Types Isdpfxsx D R Iwj Adwjal Turning

Condition: used, Year of construction: 2017, operating hours: 14,421 h, Type of fuel: Diesel Empty weight: 12.860 kg Iedsx Iqcxjpfx Adweal Dimensions (LxBxH): 405 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.440 x 2.200 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00135 - Operating hours: 14421 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3920mm - Free lift: 0mm - Fork length: 2440mm - Maximum fork width: 2200mm - Minimum fork width: 570mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Heating, Full cabin, Radio, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4050mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 12860kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2008, Year: 2008 FANUC 0i Series Control Swing over saddle: 500 mm Bar capacity: 76 mm Spindle size: 315 mm (12″) Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Swing diameter: 630 mm Tailstock quill diameter: 100 mm Tailstock quill stroke: 100 mm Taper MT #5 Turret positions: 12 stations Isdox Rrf Tspfx Adwjal Driven turret speed: 5000 rpm Rapid traverse XZ: 20 x 24 m/min Spindle motor power: 22 kW Spindle nose: A2 #8 Spindle speed: 3500 rpm Boring bar holder diameter: 50 mm Tool dimensions: 25 x 25 mm X-axis travel: 242 mm Z-axis travel: 1100 mm Machine dimensions: 3418 x 1670 x 1735 mm Machine weight: 4700 kg

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun Ijdpfx Adsx Rxv Sjwoal - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: excellent (used), machine/vehicle number: FGA03-1710-01886, Year of construction: 2019, operating hours: 1,743 h, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, fork length: 1,150 mm, Empty weight: 3.335 kg Lifting capacity: 2.000 kg Iajdpfxox Sb S Ej Adwjl Maximum passing height: 217 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-05-01 Please contact Johanny Hendrikse for more information

Condition: used, Upper driven head with Y axis, lower driven head, twin spindles. Max. swing over bed: 300 mm. Max. swing over support: 230 mm. Max. swing over bed with upper head: 230 mm. Max. swing over bed with lower head: 230 mm. Max. turning length: 600 mm. Max. distance between the face of the right and left spindle: 980 mm. Milling range outside the turning axis via Y axis: 100 mm (+/-50 mm). Max. turned bar diameter (left spindle): 65 mm. Max. turned bar diameter (right spindle): 65 mm. Max. permissible workpiece weight without counter spindle (including chuck weight = 23 kg): 12 kg. Total weight: 7800 kg. Accessories: Feeder SS 2500, length 200-1525 mm. Iodsx Np U Aspfx Adwoal

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, General Data Measurements width 2615 mm Measurements depth 2158 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 450 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 600 kg Tools Slots in storage 30 Max weight 8 kg Max tool diameter 125 mm/80 mm Max tool length 300 mm Type of tool holder BT 40 Media Chip conveyor Yes Additional Equipment Electronic Handwheel Chip conveyor Oil skimmer Emulsion flushing gun 2 x Hydraulic vice 25 x Clamping chuck BT40 This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Application Types Milling Isdpfx Adox D E H Iswoal

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers Iodpfx Aox Scplodwjal = More information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Iedpfx Ajt H Nbujdweal Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: used, machine/vehicle number: 16786, Year of construction: 2021, operating hours: 1,918 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, construction height: 2,200 mm, fork length: 1,200 mm, overall weight: 4,800 kg, enginetype: Electric, manufacturer: Doosan Iodsx Rk Elspfx Adwsal

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Ijdpfx Adethb Icjwsal Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 3100ULY (2012) CNC LATHE WITH ROTARY TOOLS AND “Y” AXIS – “Z” TRAVEL: 3,000 mm SPECIFICATIONS: - FANUC i Series CNC, 10.4” LCD Color Manual Guide - Swing over bed: 850 mm - Swing over saddle: 670 mm - Maximum turning diameter: 420 mm - Maximum turning length: 3,125 mm - Axis travel: X 210 mm, Y ±60 mm, Z 3,125 mm - Chuck size: 400 mm (*) - Bar capacity: 102 mm - Spindle nose: ASA A2#11 - Main spindle: 2,800 rpm, 22 kW - Turret: 12 stations (indexing time per position: 0.25 sec) - Rotary tool motor: 7.5 kW, 5,000 rpm - C-axis indexing: 0.001 mm - Tailstock travel: 3,135 mm INCLUDED EQUIPMENT: - Samchully MH-212 315 mm hydraulic chuck - C axis: 360° (0.001° increments) - Automatic tool setter - Built-in tailstock - Programmable tailstock - High-pressure pump - Chip conveyor - Mechanical, hydraulic, and electrical preparation for automatic steady rest - SMW AUTOBLOK SLU-X-4-ZS hydraulic steady rest - Complete standard toolholder set for internal and external machining, including 4 rotary holders (2 straight, 2 angular) - Set of manuals (Doosan and Fanuc) (All specifications to be confirmed) Iodpfx Asx Sqkwsdwoal CONDITION: Under power, in excellent condition. Ready for inspection. Immediate delivery.

Year of construction: 2011, operating hours: 5,477 h, condition: ready for operation (used), General Data Measurements width 1863 Measurements depth 4600 Measurements height 1863 Machine weight 6000 Control Unit Brand FANUC Model I series Main Drive Isdpfx Adex D N Naewoal Spindle speed range 3500 Number of axis 3 Media Chip conveyor Yes Additional Equipment Tool holders 2+2 driven tools Automatic tool measurement Oil catcher Oil mist filter (Losma) This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Application Types Turning

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch Iaodpfow Srarsx Adwsl 2 similar units in stock

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Model FANUC 18I TB Iodpjx D R R Eefx Adweal Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Iajdpfx Aexzaqiedwel Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 5000 mm Measurements height 2340 mm Machine weight 11700 kg Iodpfsx D Hwuox Adwoal Main Drive Spindle speed range 3500 Number of axis 5 Movement X-Axis Movement 255 mm Y-Axis Movement 100 mm Z-Axis Movement 800 mm Table Number of tslots 2x12 This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2008. It features a max turn diameter of 390mm, bar passage of 76mm, and a max working length of 700mm. Spindle speeds reach up to 3500 RPM with live tools at 4000 RPM. Ideal for complex turning tasks. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Iedpfx Aeu Sfncsdwsal Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information