Used Doosan Generator for sale (314)

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Cjdjthb Icepfx Addshf Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm Chsdpfxeu U E Edo Addof -protection class IP23 -Isolation class H *

Condition: used, Year of construction: 2014, operating hours: 200 h, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Empty weight: 3.840 kg Cedpfxoxr U Hgo Addjhf Current frequency: 50 Hz Voltage: 400

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Chjdsxcfgrspfx Addsf Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Codpfx Adexzaqiodshf Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. Cjdoxcfgljpfx Addjhf We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Chodpju Sfncsfx Addef Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Cjdpew Srarefx Addshf Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, controller model: FANUC 21M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 565 mm Speed: max. 12,000 rpm Chodpfjxz Ax Aex Addof Number of pallets: 2 Pallet size: 400 mm × 400 mm MACHINE DETAILS Control: FANUC 21M

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Csdpfx Asx Ad Nleddjhf Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2007, Doosan Puma 280LM Csdpfx Asx A Tzdsddjhf Year 2007 Fanuc OiTC with Manual Guide C-axis with driven tools Turning length 1030 mm Turning diameter 420 mm Z-axis 1100 mm Spindle bore 76 mm Mounted SMW autoblock 315 mm chuck with 91 mm bore BMT 55 turret Tailstock Tool probe Chip conveyor Documentation Very good condition

Year of construction: 2022, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Number of axis 3 Spindle Speed 4500 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 506 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX2100LMB was manufactured in 2022. It features a Fanuc control system, a maximum turning diameter of 300 mm, and a length of 510 mm. The X/Z axis travel is 205/560 mm, with a main spindle speed up to 4500 RPM and power of 15 kW. It includes a 12-position turret and various tool holders. Consider the opportunity to buy this DOOSAN LYNX2100LMB horizontal turning machine. Contact us for more information about this machine. Application Types Chedpfxex Dfabo Addsf Turning

Condition: used, Year of construction: 2015, operating hours: 1,603 h, functionality: fully functional, machine/vehicle number: MV0062-000372, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, type of input current: AC, overall weight: 15,000 kg, Equipment: USB port, Doosan DNM 750 II – CNC Machining Center – Excellent Condition – Available in 2 Weeks The machine is currently running in daily production, accumulating hours, and can be demonstrated live during inspection. It has been professionally maintained and shows no mechanical or electronic issues. Machine Condition - Fully functional, operates flawlessly - Clean and well-maintained - No vibrations, spindle issues, or alarm errors - Ready for immediate demonstration - Delivery possible in approx. 2 weeks Important Notes - Sold without accessories (no tool holders or workholding included) - All documents and technical information available on request - Ideal for machining steel, aluminum, and engineering plastics Additional Information - The machine can be inspected under power - Cutting test available on request Chodpfxex Ar Dqj Addof - Loading and transport can be arranged at buyer’s cost

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Chsdpfx Adjx Awzzjdof ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, spindle motor power: 30 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 1,585 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Used ​​7-axis CNC multitasking Turning Center with orientable upper head equipped with tool changer opposing spindles and Fanuc 31i-B5 Cjdpfx Aox Dc E Isddohf

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 New FANUC touch control system 12,000 rpm Chjdpfxoxggcis Addef 2x Renishaw probes BT 40 High-pressure through-spindle cooling Travel (X / Y / Z): 770 / 410 / 510 mm Table: 920 x 410 mm Maximum spindle speed: 12,000 rpm Tool magazine: 30 positions NC system: DN SOLUTIONS Fanuc i Plus

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3021 mm Measurements depth 5217 mm Measurements height 2820 mm Machine weight 18900 kg Main Drive Spindle speed range 12000 Movement X-Axis Movement 695 mm X-Axis Rapid Traverse 48 m/min Cedpfx Adexzlqbodshf Y-Axis Movement 300 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Rapid Traverse 48 m/min A-Axis Movement 1538 mm A-Axis Rapid Traverse 30 m/min B-Axis Movement 240° B-Axis Rapid Traverse 40 rpm This Doosan Puma SMX 2600 ST turn-mill centre was manufactured in 2018. It features a FANUC 31i-B5 NC system with a 15.0" color display. The machine is CE certified and operates on a 3-phase AC 380V / 50 Hz power source. It boasts a max left spindle speed of 4000 rpm and a max milling spindle speed of 12,000 rpm. The tool storage capacity is 80 tools, and it includes dual pressure chucking. Consider the opportunity to buy this Doosan Puma SMX 2600 ST machine we have for sale. Reach out for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2018, operating hours: 849 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-620, total height: 3,100 mm, total length: 4,200 mm, total width: 2,450 mm, table width: 570 mm, table length: 1,300 mm, table load: 1,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 417 h, coolant supply: 20 bar, spindle motor power: 17 W, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 3-axis vertical machining center with HEID iTNC-620 CNC Chsdpfx Aox Dbm Rsddsf

Condition: excellent (used), Year of construction: 2012, CNC lathe with 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port Year 2012 Codpfx Aexyauloddshf 8-inch chuck Spindle bore 65 mm Turning length 400 mm 12-position turret Tailstock Tray with coolant pump

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 2 Additional Equipment Motorized bar passage with counter-spindle Complete with accessories and LNS bar loader This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Application Types Turning Csdpjx Dnwvsfx Addohf

Condition: used, Year of construction: 2009, turning length: 1,300 mm, turning diameter: 400 mm, spindle bore: 76 mm, 2-axis CNC lathe DOOSAN PUMA 300LB Chodsxxzzqjpfx Addsf year of manufacture 2009 Fanuc 21iTB with Manual Guide Chuck 250mm maximum turning diameter 400mm maximum turning length 1300mm Z-axis: 1330mm Axis: 282 (82+200) mm Turret for 10 tools Spindle bore 76 mm Steady rest Swm Autoblok Chip conveyor Probe Tailstock Documentation

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 3480 kg Measurements height 1693 mm Main Drive Spindle Speed 6000 RPM Spindle motor power 15 kW Number of axis 2 Control Unit Brand SIEMENS Model SINUMERIK 828D Technical Specification Driven Tools yes Dimensions Machine Length 2540 mm Cedsxzvt Tjpfx Addshf Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm This DOOSAN LYNX 2100LMA was manufactured in 2019. It features a 6-inch chuck, a maximum turning diameter of 300 mm, and a length of 510 mm. The machine offers rapid traverses of 30 m/min in the X-axis and 36 m/min in the Z-axis, with a spindle speed up to 6000 rpm. Ideal for precision turning, it also includes a 12-station turret. Contact us for more information about this machine. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Dimensions Machine Length 2880 mm Chsdpfx Asxzlqneddjf Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-TB Main Drive Number of axis 6 Spindle Speed 5000 RPM Chjdpoxzvqljfx Addof This 6-axis DOOSAN Puma TT1800SY was manufactured in 2008. It features a spindle rpm of 5000, a maximum distance between spindle noses of 980 mm, and a bar capacity of 65 mm. It includes a 210 mm diameter 3-jaw chuck on the main spindle and a 170 mm diameter 3-jaw chuck on the second spindle. If you are looking to get high-quality milling capabilities, consider the DOOSAN Puma TT1800SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, General Data Measurements width 2615 mm Measurements depth 2158 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 450 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 600 kg Tools Slots in storage 30 Max weight 8 kg Max tool diameter 125 mm/80 mm Max tool length 300 mm Type of tool holder BT 40 Media Chip conveyor Yes Additional Equipment Electronic Handwheel Chip conveyor Oil skimmer Emulsion flushing gun 2 x Hydraulic vice 25 x Clamping chuck BT40 This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Codpfoxzvu Dex Addjhf Application Types Milling