Used Doosan Dx 225 Lc for sale (295)

Condition: used, functionality: fully functional, machine/vehicle number: 0195, Year of construction: 2023, operating hours: 255 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, total length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0195 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Ijdey Up N Dspfx Anvjau Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery type: PzS Battery year of construction: 2023 Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Mast type: Triplex Gearbox: Automatic Technical condition: very good Iaedpfoy Up Itox Anveu Side shift, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, lifting height: 4,710 mm, free lift: 1,263 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Iedpsy Up Hcefx Anvoau Technical condition: normal Sideshifter, 3rd valve, 4th valve, rear work light, front work light,

Condition: used, functionality: fully functional, machine/vehicle number: 0400, Year of construction: 2018, operating hours: 1,330 h, load capacity: 3,000 kg, lifting height: 6,010 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,660 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0400 Mast type: Triplex Isdpsy Up Dbefx Anvsau Condition: Ready for use and fully functional Technical condition: good Front tire type: Non Marking Rear tire type: Non Marking Side shifter, 3rd valve, 4th valve, rear work light, front work light, non-marking tires,

Condition: used, functionality: fully functional, machine/vehicle number: 0148, Year of construction: 2021, operating hours: 500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,195 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: 0148 Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Front tyres condition: 60 - 80% Iedjy Up Awepfx Anveau Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 0095, Year of construction: 2021, operating hours: 355 h, load capacity: 2,500 kg, lifting height: 3,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0095 Load centre: 500 mm Iedey Upz Tepfx Anveau ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 625Ah Battery type: PzS Battery year: 2021 Sideshift, fork positioner, 3rd valve, rear work light, front work light, roof cover, solenoid valve, safety light, interior mirror,

Condition: used, functionality: fully functional, machine/vehicle number: 2969, Year of construction: 2018, operating hours: 4,255 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,045 mm, power: 12 kW (16.32 HP), fork length: 1,200 mm, empty load weight: 3,190 kg, total length: 1,891 mm, drive type: Elektro, construction width: 1,090 mm, Electric 3-wheel forklift Chassis number: 2969 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Iaedpey Upn Tefx Anvju Mast type: Triplex Condition: Ready for use and fully operational Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Battery type: PzS Battery year: 2018 Side shifter, 3rd valve, 4th valve, front work lights, overhead guard, CE certificate, seat,

Condition: used, functionality: fully functional, machine/vehicle number: 3003, Year of construction: 2015, operating hours: 4,372 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 10 kW (13.60 HP), drive type: Elektro, Electric 3-wheel forklift Chassis number: 3003 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Iajdpoy Upnmjfx Anvju Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery voltage: 48V Battery type: PzS Side shifter, 3rd valve, rear work lights, front work lights, roof cover, safety light,

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Iasdpfx Ansy Uplxjvsu Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) Isdpjx D I T Rofx Anvoau • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm Ijdpfx Ansx D H Aqovsau • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: like new (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this Doosan PUMA TT1300SYB CNC turning and milling center, in like-new condition, manufactured in 2021. Manufacturer: Doosan Model: PUMA TT1300SYB Year of manufacture: 2021 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need further information, please do not hesitate to send us a message or call us. For sale: a nearly new 2021 Doosan PUMA TT1300SYYB with an LNS SPRINT 565 S2 automatic bar feeder, motorized tool holders, and only 3,600 cutting hours. This is a high-end, multi-tasking CNC lathe with a double spindle and double motorized turret, with an independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized double spindle -Double turret with motorized tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction in cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Special price: 165,000 EUR, OPERATING HOURS: ONLY 3,500 CUTTING HOURS. Available for inspection and testing in operation. Iedpoyryymjfx Anveau Simultaneous machining with two turrets. Automatic transfer between the main and sub-spindle. Possibility of finishing the complete part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH Iasdpfxsy Hqyho Anveu

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display Iasdpjyzgp Uefx Anvsu -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large Iodsyzhbfopfx Anvoau removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Technical Specification Counter Spindle No Driven Tools No Iodpfey Hrgcox Anveau

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 4,799 h, load capacity: 16,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,870 mm, power: 118 kW (160.44 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 600 Mast type: Duplex Iajdpfx Anjy Scxtevou Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Rear tires type: Air Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, Isdpfxjy S Ng Dj Anveau work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, reversing alarm, 4-cylinder engine. Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor Isdpoy Tzcyjfx Anveau - Electric transformer

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min Iasdpfx Anjy E I Hiovsu • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm Iodpfxjy E Izaj Anvoau • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. Iaodpfx Aneyg Df Aovju We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: used, machine/vehicle number: 8060, Year of construction: 2008, operating hours: 10,500 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 1,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, Equipment: sideshift, .: 8060 Equipment details: Year of construction: 2008 Lifting capacity: 3000 kg Lift height: 4600 mm Read operating hours: 10500 h Free lift: 1300 mm Mast type: Triplex Mast height: 2140 mm Length/Width/Height: 2650 / 1200 / 2170 mm Operating weight: 5061 kg ---- Features: * Protective roof * 3rd valve * 4th valve * Half cab * Full free lift * Front work light ----- Attachments: * Sideshift * Fork positioner Iajdpfetw Axvjx Anvou ---- Further equipment information: Integrated sideshift Ready-to-drive condition as returned by the customer ---- Operating hours given are generally read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers available immediately for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m. you can reach us. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold in AS-IS condition, not refurbished. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Machine details: Iodpjyu Tk Dofx Anvoau Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: excellent (used), turning diameter over cross slide: 300 mm, turning length: 510 mm, Model: 2100 LYB Control: Fanuc i Series Year: 2019 Turning Diameter: 300mm Turning Length: 510mm ‘X’ Axis Travel: 205mm Iaodpfx Aey N Uqijnvsu ‘Y’ Axis Travel: 105mm ‘Z’ Axis Travel: 560mm Spindle Speed: 4500 RPM Spindle Power: 15KW Spindle Torque: 169N-M Machine With: 200mm Power Chuck Driven Tools (1-AxiaL -1- Radial) Tool Eye Parts Catcher Filtermist Dimensions: 2880 x 1711 x 1921 High Weight: 3900 Kgs