Used Doosan Dx 255 Lc for sale (314)

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Chjdpfx Adexwqtaedof Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm Chsdpjxfa Ipjfx Addjf DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H Chedpfx Aju U E Ededdof *

Condition: used, Year of construction: 2013, Doosan Puma 480 Turning Centre with Fanuc Series 32i - Model A CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 10 Position Tool Turret, Tailstock, LNS Swarf Conveyor, Filtermist FX6002 Oil Mist Filter Extractor, Machine Weight 10100kg. S/No. ML0144-000404 (2013) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Chjdpfx Adoxztl Hjdef

Condition: used, Year of construction: 2012, Serial number: DWGCWLAPTB101xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20995 Engelsk: Specifications: 2012 model Hours: approx. 11,150 (can increase) 264 kW Weight: 25,500 kg Central grease Tires (see photos) Scale Rear-view camera Extra lights AC/climate control Cedpfxswzg Dfo Addshf Radio/DAB See video Ready for delivery  Description:2012 Doosan DL 450-3 wheel loader with bucket and scale.The machine is in daily use, so the hour count may increase.See video.Ready for delivery Own weight: 25500 Total Weight: 25500 Model: DL 450-3

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 Csdpfxotzgaqe Addehf CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Cedpsxn U D Refx Addjhf Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Codjxggktjpfx Addshf Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price Chsdpfoxr Utmox Addsf Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Chjdexzq Ufopfx Addef Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, machine/vehicle number: FDB04-1240-02249, Year of construction: 2013, operating hours: 13,937 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 7.436 kg Lifting capacity: 5.000 kg CE mark: yes Latest inspection: 2024-01-10 Chedpfx Aorh Eb Ejddjf Please contact Johanny Hendrikse for more information

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 530 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Cjdpfx Asukxcvoddjhf Sideshift, 3rd valve, 4th valve, half-cabin, full free lift, twin tires,

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 4000 mm Measurements depth 5000 mm Measurements height 3800 mm Machine weight 18000 – 20000 kg Main Drive Spindle speed range 6000 Tool taper BT-50 Number of axis 3 Movement X-Axis Movement 2500 mm Chsdpfxoxvfiye Addef X-Axis Rapid Traverse 20 m/min Y-Axis Movement 950 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 18 m/min Table Table load 4000 kg This 3-axis DOOSAN MYNX 9500 was manufactured in 2020, featuring a BT-50 spindle taper and a spindle speed of 6,000 rpm. It includes a 40-tool ATC and can handle a table load up to 4,000 kg. The machine dimensions are approximately 5,000 × 4,000 × 3,800 mm. If you are looking to get high quality milling capabilities consider the DOOSAN MYNX 9500 machine we have for tact us for more information. Application Types Milling

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Cjdpfx Adexwgc Dsdehf Battery year of manufacture: 2020

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min Chjdpfx Aoxn Amtsddof max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring Chodpfsv Hyf Uex Addef

Condition: excellent (used), machine/vehicle number: FBA12-2470-00531, Year of construction: 2017, operating hours: 5,070 h, lifting height: 4,750 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, battery manufacturer: tab, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,200 mm, Weights Empty weight: 3.554 kg Battery Battery: 690 Ah, 48 V, Year of manufacture 2017, Brand of battery tab Functional Lifting capacity: 1.800 kg Maximum passing height: 210 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Chodpfxor Eqivj Addef Other information Tyre brand: non marking Fork carriage: Sideshifter Latest inspection: 2024-04-08 Additional information Please contact Johanny Hendrikse for more information

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Csdpfsw Ruyxox Addjhf Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: DA 30 Dumper

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) Chsdpfexirkqex Addef This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 45,00,000 mm, construction height: 21,70,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - . Chedpfx Ajvhpr Hoddof

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Cjdpfx Aou Sfncjddohf Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Codpfx Asxlcivjddshf

Condition: excellent (used), Year of construction: 2011, Turning and Milling Center Doosan Puma TT 1800 SY, Year 2012 Control: CNC Fanuc 18i-TB Number of simultaneous axes: 8 (C1, X1, Z1, Y / X2, Z2 / B & C2) Number of simultaneous axes according to export control: 4 (C1, X1, Z1, Y) Linear axes: 3 (X1, Z1, Y) Rotary axes: 1 (C1) Parallel axes: 4 (X2, Z2, B, C2) Technical Data: Chedpfxsxtxpbe Addof - X1 axis: 165 mm, X2 axis: 190 mm - Z1 axis: 700 mm, Z2 axis: 720 mm - Y axis: 100 (± 50) mm, B axis: 770 mm - Bar capacity: 65 mm - 2x Turrets – 12 + 12 tool stations Max. Turning Diameter: 230 mm Max. Working Length: 230 mm Spindle speed: 5,000 rpm Equipment: Standard, transformer, chip conveyor with coolant tank, 1 set of tool holders including driven tools, driven holders 2x axial and 2x radial holders, documentation Bar feeder LNS

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires Chedpfx Aovg Nq Hsddjf - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Chsdpfxjxr Rz Ts Addjf Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning