Used Doosan Hp 6300 for sale (260)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s Tjdpozh Hpfefx Aahoc • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Todpfxoz Apb To Aahjc Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 Tjdpfx Aaevw Uyushoc MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Tedpfx Asypb Srsahoc Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2023, operating hours: 113 h,

Condition: used, Year of construction: 2023, operating hours: 2 h,

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Todpfx Aaox Sq Uvehjc Chip conveyor Through-spindle coolant (IKZ)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor Tedpfjz Hwgpsx Aahjc

Condition: excellent (used), Year of construction: 2017, operating hours: 2,742 h, functionality: fully functional, machine/vehicle number: MV0061-000661, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, workpiece length (max.): 800 mm, workpiece width (max.): 550 mm, workpiece height (max.): 460 mm, total height: 2,580 mm, total length: 3,260 mm, total width: 3,130 mm, table width: 570 mm, table height: 880 mm, table length: 860 mm, overall weight: 9,200 kg, distance table center to spindle nose: 720 mm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Doosan VC 510 (2017) – Vertical Machining Center with APC High-productivity 40-taper vertical machining center featuring a heavy-duty column-moving design and an integrated 2-pallet automatic pallet changer (APC). Key Specifications: Year: 2017 Control: Fanuc Travels (X / Y / Z): 762 × 516 × 570 mm Pallet Size (×2): 860 × 570 mm (Rotary APC, ~6 sec swap) Max Workpiece Size: 800 × 550 × 460 mm Max Table Load: 350 kg per pallet Spindle Motor (kW): 15(30min)/11(CONT.) Max. Torque (Nm): 191.1(30min) Tsdpfx Aajz Atqrehec Tool Changer (ATC): 30 Tools Rapid Traverse (X/Y/Z): 40 / 40 / 32 m/min Guideways: Heavy-duty Roller LM Guides Machine Weight: ~9,200 kg Excellent condition, fully maintained, and built for continuous high-speed production. Contact for inspection and further details.

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Y: 540 mm Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 Tedpez Hyyrefx Aahjc INTERNAL SPINDLE COOLING / HIGH PRESSURE TOOL CHANGER: 30 POSITIONS NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Tsdpjyud Uajfx Aahsc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. Todpfszh U Euex Aahsc The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool load monitoring -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: used, Year of construction: 2016, DOOSAN LYNX 300M YEAR OF MANUFACTURE: 2016 Machine equipped with a C-axis and powered tools. Model: LYNX 300 M, FANUC 0i TF–s control (10.4” LCD display + Manual Guide) Standard equipment: Tjdpfx Aoz E Rv Ieahsc Spindle speed: 3500 rpm Main motor power: AC 15/11 kW Rapid traverse rate (X / Z axes): 24 / 30 m/min Hydraulic 3-jaw chuck, 255 mm Power of tool drive: 5.5 kW (5000 rpm) Max. turning diameter: 370 mm Max. turning diameter over the carriage: 651 mm Max. turning length: 712 mm Spindle bore (max. bar diameter): 76 mm Tool shank cross-section: 25 x 25 mm (Ø40 mm) Number of tool positions: 12 (tool change time: 0.15 s) Tailstock, CE certificate, transformer 2 axial (vertical) powered tool holders + 2 radial tool holders, basic tool holder set Optional equipment: · Chip conveyor · Tool load monitoring system · Preparation for bar feeder · Part catcher (box version) · Automatic tool measuring system · High-pressure coolant system (7 bar) · Oil separator · Three-color status indicator lamp · Fast Ethernet + 2 GB memory in the control

Condition: good (used), Year of construction: 2010, operating hours: 1,15,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Tsdpfeyx U Nwjx Aahsc

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 3,860 h, load capacity: 2,500 kg, lifting height: 4,730 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, power: 46 kW (62.54 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Tedpfx Aasz Dzdmohec Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: DOOSAN D25S-5 diesel forklift - - - 2.5 ton lifting capacity - - - Year of manufacture 2008 - - - Side shifter - - - TRIPLEX free-lift mast - - - Overall height 2.16m - - - Lifting height 4.73m - - - 3860 operating hours according to display - - - Forklift with 4-cylinder YANMAR diesel engine, 62 hp - - - Mechanical hydraulic levers - - - Solid rubber tires, front approx. 95%, rear approx. 90% - - - Work lights - - - Simple and mechanical forklift - - - Good condition - - - NEW starter - - - NEW battery - - - NEW alternator - - - Front forklift can be inspected on-site - - - Affordable delivery options!! Side shifter, 3rd valve, rear work light, front work light, roof protection,

Condition: good (used), Year of construction: 2016, functionality: fully functional, DOOSAN VCF-850LSR – 5-Axis CNC Machining Center with Moving Column – Year 2016 – HEIDENHAIN TNC-640 X/Y/Z Travels: 3,000 / 850 / 800 mm B-Axis: +110° / -110° C-Axis: 360° continuous X/Y/Z Rapid Traverse: 40 m/min Main Table: 3,500 x 870 mm Table Load Capacity: 3,500 kg Todpfxoz Atymj Aahjc Integrated Rotary Table: Ø 800 mm Max. Workpiece Size: Ø 1,050 x H 680 mm Spindle: ISO-40, 12,000 rpm Spindle Power: 32/24 kW Torque: 126.27 Nm Tool Changer: 60 positions Dimensions: 5,440 x 3,795 x H 3,205 mm Weight: 24,000 kg Machine is complete with chip conveyor, coolant tank with washing pumps, high-pressure through-spindle coolant system (CTS), linear scales on X/Y/Z axes, spindle cooling unit, Renishaw tool presetter and workpiece probe, mist extractor, three magnetic tables with zero-point clamping system, a set of tool holders and various tools, manuals, electrical diagrams, and EC/CE Declaration.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system Tsdezzdh Eepfx Aahsc - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: like new (used), Year of construction: 2018, DOOSAN GT 2600 M LATHE YEAR 2018 ONLY: 652 CUTTING HOURS MAX. ROTATING DIAMETER: 630 mm MAX. MACHINABLE LENGTH: 658 mm MAX. MACHINABLE DIAMETER: 460 mm BAR FEEDER CAPACITY: 82 mm SPINDLE SPEED: 35 - 3,500 RPM SPINDLE MOUNT: ASA - 8 TRAVEL: Tedpfez D Eq Rex Aahsc X: 265 mm Z: 680 mm MOTORIZED TURRET TAILSTOCK CHIP CONVEYOR TOOL PRESETTING WEIGHT: 5,500 KG

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ITALIAN — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Measuring systems: Heidenhain linear scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Tsdpsz Atvnofx Aahsc Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Linear scales: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ITALIAN — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of construction: 2019 CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous Rapid traverse rates X / Y / Z axes: 45,000 mm/min Tsdpfxjz Atwfs Aahec Working feed rates X / Y / Z axes: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle mounting: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Tool magazine: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point clamping system: Included Tooling: Set of shanks/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of manufacture: 2019 CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous X / Y / Z rapid traverse: 45,000 mm/min X / Y / Z working feed: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle taper: ISO-40 Tool holder / pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Tool changer: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on the X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point system: Included Tooling: Set of shanks/pull studs and various tooling Documentation: Manuals, electrical diagrams and CE declaration

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tsdpfx Aozwhtkeahoc Tool Size: BT40

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Main spindle torque (Nm): 169.0 Travel ranges: X: 205 mm Z: 340 mm Tjdpfxjz Hxz Ue Aahjc Linear guide -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 Tsdpfx Aaez Dq Injhjc We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; Tedpfsz Ea E Esx Aahoc ideal for dry machining.

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Tsdpfx Aajz Ehvfohec Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,