Used Double Disc Grinding for sale (19,563)

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Csdpfjb A Nlksx Agkjpw -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts Cjdpfxsb A Rbgo Agkjpw -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts Cjdpsb A Hw Nofx Agkjpw

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Cpodpfx Asxuv Udsgkow The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2014, condition: new, Double grinding machine REMA DS 40/400 Cedegkrxcopfx Agkopw Motor : 3kw , plus four boxes of grinding wheels

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Cpjdpfx Agsxf Uv Uokjw Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Cpjdpfxsxrgvae Agkjw Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Required space (L x W x H): 630 x 340 x 1150 mm Csdpfsxrguiox Agkjpw Weight: approx. 80 kg

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Csdpfsxrgtxjx Agkjpw Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition Cjdpsxq Hkuefx Agkspw used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition Cpsdpjxpqy Rsfx Agkow

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper Codjrk U Edjpfx Agkepw - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . Cpsdot Hw Naopfx Agksw * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm Cpsdpfot Hw N Hjx Agksw total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm electr. Connection: 380 V, 0.6 kW Codpefnbgyjfx Agkepw Space requirement: 670 x 400 x 1140 mm Weight: approx. 120 kg

Year of construction: 1987, condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Cpodpfxjit N Ipe Agkew Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter Codpswmg Sajfx Agkspw power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 95094, total width: 1,300 mm, total length: 2,200 mm, total height: 2,150 mm, overall weight: 700 kg, rotational speed (max.): 2,880 rpm, shaft diameter: 45 mm, Equipment: type plate available, Greif belt sander type KRX40/2/11 – designed for polishing and grinding. Machine ready for operation, 16-6h plug type 2136 Shaft width: 150 mm Ø Shaft diameter: 45 mm Transport dimensions: 2200 mm x 1300 mm x 2150 mm (L x W x H) [on pallet] Weight: 700 kg Set of shaft clamps Set of spacers for mounting the contact wheel Contact wheel [450 mm diameter, 50 mm wheel thickness, SH65 wheel hardness, 45 mm bore] 60 mm wrenches for clamp replacement Machine currently adapted for polishing on the left side and operating a 3500 mm long belt on the right side. No documentation – no CE Cedpfx Agewq Dh Hokepw

Condition: repair required (used), functionality: not functional, total width: 1,300 mm, total length: 1,700 mm, total height: 2,150 mm, overall weight: 600 kg, rotational speed (max.): 2,880 rpm, Greif belt grinder – intended for polishing and grinding. The machine requires a control/electrics upgrade – motors are operational. No documentation – no CE marking Spindle width: 150 mm Ø Spindle diameter: 35 mm Dimensions for transport: 1700 mm x 1300 mm x 2150 mm (L x W x H) [on pallet] Codpowq Dntofx Agkopw Weight: 600 kg Complete set of spindle clamps Missing spacers for mounting the contact wheel Contact wheel 1 [450 mm diameter, 45 mm wheel thickness, SH65 wheel hardness, 35 mm bore] Contact wheel 2 [450 mm diameter, 30 mm wheel thickness, SH65 wheel hardness, 35 mm bore] The machine is currently set up for a 3500 mm belt – adjustable. Two covers for operation with endless belts.

Condition: used, functionality: fully functional, total width: 300 mm, total length: 1,600 mm, total height: 850 mm, overall weight: 80 kg, Machine designed for polishing and grinding with non-woven fabrics/felt/polishing materials. . Cpedpfx Agowq Dvwokjw Machine in good working order. Shank width: 185mm Ø Shank diameter: 34mm Transport dimensions: 1600 mm x 300 mm x 850 mm (length x width x height) [on a pallet] Weight: 80kg A set of clamps for the shank No spacers for mounting abrasive materials

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Csdpfek D Ex Tjx Agkopw grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm If you have any further questions, please do not hesitate to contact us!

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports Cedpfx Agjiiyq Hekepw High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Also other models available from stock! Inquire about the current stock.

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Cpsdpfx Agoiiyr Sskew Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Condition: good (used), Aceti Macchine double grinding wheel Type: FB 90 2/4 ART 101 Diameter grinding stone max: 210 mm Cpodpsl I I Upefx Agkjw Machine height: 130 cm Weight: ca 125 KG

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Cedpfertr D Iox Agkspw Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.