Used Double End Tenoner for sale (17,353)

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Hfsdpfx Aezy I Tcsftjl

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Hfjdpfx Afst R T Hcstel Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Automatic carousel printing press, 10/12 stations 10 colors 12 printing stations Usable printing area: 50x50 Year: 2000 Pneumatic frame carriers Print test/print start/print end system On-screen display of malfunctions Double-pass printing Hedezzpnwspfx Aftofl Quick-release system for printing stations No. 1 set of printing stations No. 1 set of squeegees and counter-squeegees

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Hsdszzvf Ajpfx Aftsfl Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Hsdpsv Nbxnjfx Aftefl Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW Hjdpeq Nf Enjfx Aftjfl For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. Hodpezzvhdefx Aftjfl This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: used, color: grey, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 800 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Hfsdpfsz Aurqsx Aftol Body: Roll-off container with double doors, approx. 10 m³, roll-off container approx. 10 m³ according to DIN 30722-1, with double doors/portal doors. Internal dimensions: 5,500 mm x 2,300 mm x 800 mm Sheet thickness 5/3, end profile tube, floor/wall 45 degrees, external stringers 45 degrees, (90x50x4), stringer spacing 750 mm, RAL 7016 anthracite. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. Hodpoibyatjfx Aftefl The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, color: grey, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 800 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: Roll-off container with double doors, approx. 10 m³, roll-off container approx. 10 m³ according to DIN 30722-1, with double doors/portal doors. Internal dimensions: 5,500 mm x 2,300 mm x 800 mm Sheet thickness 5/3, end profile tube, floor/wall 45 degrees, external stringers 45 degrees, (90x50x4), stringer spacing 750 mm, RAL 7016 anthracite. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hfsdpfx Afoz Aurkjtel

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 100 mm Hsdozik Diopfx Aftsfl Saw blade arbor diameter: 25 mm Router bit arbor diameter: 35 mm Router bit arbor height: 120 mm Manual feed adjustment for the arbor and saw blade Table length: 1400 mm Manual clamping device Separate motor for the arbor and saw blade Power supply: 400 V Overall dimensions: Length: 1950 mm Width: 1000 mm Height: 1250 mm

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Hjdpfx Afozibdtstjfl Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum Hfjdpfszzrutjx Aftel • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265 Hodpfxjx Au A No Aftsfl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Hodpfx Aozzkvcoftofl Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 1996, CNC TOOL AND CUTTER GRINDER Manufacturer: Alfred H. Schütte, Cologne, Germany Model: WU 405 Year of manufacture: 1996 Serial number: Series 12, No. 09 Machine type: Five-axis CNC universal tool and cutter grinder Hfodpezxhqrsfx Aftsl CNC control: NUM Drive system: Siemens SIMODRIVE 611 Axis travel: - X axis: 540 mm - Y axis: 280 mm - Z axis: 260 mm - A/W rotary axis: approximately 355° - C-axis grinding-head rotation: 330° - Manual grinding-head inclination: ±25° Working range: - Centre height: approximately 200 mm - Maximum clamping length between centres: approximately 700 mm - Maximum number of divisions: 999 - Programmable lead range: approximately 0.5–10,000 mm Feed ranges: - X axis: 0.1–10,000 mm/min - Y axis: 0.1–10,000 mm/min - Z axis: 0.1–5,000 mm/min Grinding spindle: - Double-ended grinding spindle - Spindle-speed range: approximately 1,800–12,000 rpm - Maximum spindle speed: 12,000 rpm - Frequency-controlled spindle motor Electrical data: - Rated operating voltage: 400 V - Power supply: three-phase - Frequency: 50 Hz - Rated current: 18 A - Electrical drawing number: PE-WU400-1209 - CE marked Approximate machine data: - Machine weight: approximately 3,150 kg - Fully enclosed grinding area - Five CNC-controlled axes - Suitable for manufacturing and resharpening cutting tools - Designed for grinding medium and large workpieces and for grinding between centres

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders Hedsyl Upvepfx Aftsfl - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 Hjdpfx Aszxn S Ajftefl With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, CML - DEP FLEXIBLE LINE FOR WINDOWS ELEEMNTS PRODUCTION AS PER LAYOUT LY-09-087-05 DATED 27/01/2010 01 BELT CONVEYOR 1=4500 mm 02 "L" TRANSFER WITH PVC COATED ROLLERS AND BUFFER 03 DOUBLE END TENONER CML MOD. STDA 336 04 FULL SYSTEM FOR MACHINE CONTROL Hfodpfx Afjxtacietsl SEE TECHNICAL FEATURES ATTACHED PDF-FILE

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support Hfedoykam Dspfx Aftel All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Hsdpezibc Aefx Aftsfl Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: good (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, safety light barrier, HYDRA is a high-speed, two-head digital quilting machine, equipped with a fully automatic double-feed system, designed for the furniture, mattress, and home textile industries. It performs all operations: feeding via motorized rollers, quilting, and cutting of the duvet or padding to the desired length. The double-feed system allows quilting of two rolls simultaneously, while also offering motorized width adjustment for single-feed mode, with a changeover time of just 20 seconds. This double-feed system is ideal for large-scale production of sofas and headboards, doubling the manufacturing capacity through the simultaneous quilting of two rolls. Conversely, switching to single-feed mode allows for the quilting of high-end mattresses and large-format home textile items. No rework machine required: the ability to resume stitching at the exact stopping point or at the desired point. Automatic parking in case of upper or lower thread breakage. Automatic measurement of the maximum physical stitching area for cross-verification with the active pattern. Easy adaptation of quilting patterns. Motorized adjustment of the width of the side and center roller clamps. Your sofas, mattresses, headboards, and duvets will stand out for the quality of their stitches, their patterns, their durability, and your increased efficiency. Key features: High-quality Dürkopp Adler sewing head with spare parts available worldwide. Upper and lower thread trimming in 0.5 seconds. Simultaneous quilting of two different rolls for increased productivity. Single-roll feed mode available, with switching between single and double modes in seconds. Statistical production graphics: stitch length, pattern name, customer name, stitching time, number of stitches, etc. ElektroteksCare: online after-sales service. Advanced side cutters. Easy troubleshooting through error code display. Adjustable material tension in both directions. Hedpfx Ajzx Sw Asftefl Reliable Omron control system offering maximum efficiency. Ergonomic feeding system for multiple rolls. High-durability pneumatic system with low air consumption.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Hfodpfx Afezzkt Uetsl Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine Hfedpfjb Sgzdjx Aftsl -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -with 2 motors for cleaning from above and below -with oscillation -Swivelable - laterally adjustable Height: adjustable Quantity: 1 piece available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Hfodsuhv R Dspfx Aftol Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25