Used Double End Trim Saw for sale (22,797)

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet. Kodstqt T Ispfx Adwjdg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, cutting length (max.): 6,000 mm, - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm Kdedpfx Aex Aqhzsdwjg - E255 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production Kjdpsyaazysfx Adwjdg – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: – Max. blade diameter: 350 mm – Spindle diameter: 30 mm – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm – Weight: ~1000 kg

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm Kjdpfex U Tvhex Adwedg - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm Kdodpfx Adex Hhw Rowjg - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm Kdedpfsx Hhxhox Adwsg - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs Kjdpfx Ajx Tpukodwjdg - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Kdedsx S Nadjpfx Adweg Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Kjdpfowprmzjx Adwsdg Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit Kjdpfx Aderamvajwjdg • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw Kdodsrcm Ruepfx Adweg - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Year of construction: 1995, condition: refurbished (used), Trimming saw – edging saw MEM Cobra Year of manufacture: approx. 1995 Kodpoxcp A Dsfx Adwsdg Max. cutting height: 120 mm, max. pass-through width: 1,070 mm. 4 variable axes. 2 x 55 kW saw drive power. Completely overhauled machine! System immediately available for takeover!

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Kjdpjxnlgcjfx Adwsdg

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch Kedpfxox Sq E Is Adwedg - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2012, Double head saw for aluminim or PVC profiles PERTICI UNIVER 400IP, year 2012 Condition: excellent - Two Ø400 mm tungsten carbide saw blades - Spray mist blade lubrication system - Maximum cut between the two heads: 3500 mm - Minimum cutting capacity between two heads at 90°: 580 mm - Minimum cutting capacity between two heads at 45°: 580 mm - Hydro-pneumatic feeding of saw blades Kodpfehqb T Hex Adwodg - Two horizontal pneumatic vices - Two vertical pneumatic vices - Two intermidiate profile support

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, total height: 1,800 mm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), input frequency: 50 Hz, input current: 18 A, EMMEGI TWIN ELECTRA SUN TU/6 double mitre saw Kdedpfx Ajx Uyvzedwog Note: The item can be collected from 16.02.2026 on a date to be arranged. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, power: 7.7 kW (10.47 HP), input frequency: 50 Hz, input current: 19 A, EMMEGI COMBI 5 AXIS STAR TU/6 Double Mitre Saw Attention: The item can be collected from 16.02.2026 onwards, with the specific pickup date to be agreed upon. Kodox Uyr Nspfx Adwodg FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 280431, Schüco PDG E-Cut 500 - cutting discs with a diameter of 500 mm The Schüco PDG 500 is a robust metalworking machine designed for efficient production. Application: Designed for precise miter cuts of aluminum profiles. Cutting Discs: Equipped with two horizontal cutting discs with a diameter of 500 mm. Motor: Typically 2x 2.2 kW or 2x 3 kW, with a rotational speed of 2800 rpm. Angle Adjustment: The cutting heads can be infinitely tilted (typically from 45° to 20° outward/inward) thanks to a servomotor, ensuring high precision. Control: Menu-driven and intuitive operation, accessible via the control panel keyboard, often with profile visualization and clamp positioning. Efficiency: The dual-head design allows for cutting both ends of the profile simultaneously, reducing production time by half. The machine can be directly controlled by SchüCal software, making it easier to manage cutting lists. - export price Kedpoyahqcefx Adwsdg - possibility of transport (only after inspection or payment) - condition as in the pictures / i can send video from working or you can test machine in our company Price to export You can see this lifter in Poland - Piwniczna Zdrój - 120km from Krakow

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. Kdedpsx Ut H Tefx Adwog The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Condition: used, Twin-end profiler Schwabedissen DAa 79 simultaneous, face-side processing of workpieces. From location available until 28.01.2026 Unit 1 Left: Chop saw // 3.7 kW // Horizontally & vertically adjustable and swiveling Unit 2 Left: Saw & milling machine // 4.4 kW // Horizontally & vertically adjustable and swiveling Unit 3 Left: Saw & milling machine // 4.4 kW // Horizontally & vertically adjustable and swiveling Unit 4 Right: Saw & milling machine // 3.7 kW // Horizontally & vertically adjustable and swiveling Unit 5 Right: Saw & milling machine // 4.4 kW // Horizontally & vertically adjustable and swiveling working width: 2.100 mm clearance height: Max. 100 mm Kdodpjx Syxkefx Adwog feed: 4 – 20 m/min

Condition: used, Double-head cutting saw with 3 controlled axes, featuring automatic movement of the movable head and electronic management of all cutting angles from 45° (internal) to 15° (external). Blade feed is driven by a pair of oil-pneumatic cylinders. MAIN FEATURES *Electronic control of X axis *Standard X-axis positioning speed (m/min): 25 *Movable head position detection via direct measuring system with absolute magnetic strip *Cutting unit tilt detection via direct measuring system with absolute magnetic strip *Electronic control of intermediate angles *Max internal angle: 45° *Max external angle: 15° *Oil-pneumatic blade feed *Useful cutting length (mm): 5,000 *Carbide blades: 2 *Max blade diameter (mm): 550 *Blade motor power (kW): 2.64 *ELECTRONIC PROFILE THICKNESS MEASURING DEVICE *LABEL PRINTER *Front local safety guard with pneumatic operation Kdjdpfxjyaqu Ro Adwjg *Minimal oil diffusion lubrication system *Prepared for automatic start of external dust extractor *Pair of horizontal pneumatic clamps with “low pressure” device *Pair of horizontal clamps with vertical clamping system *Mechanical intermediate profile support *Roller table on movable head with mechanical profile supports in assisted mode *Weight: 1,480 kg

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Angle 0º ø500 500×700 Default equipment Control panel at the front of the machine Semi-automatic work Built-in hydraulic unit Kdsdpsizi T Esfx Adweg Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Kodetvpfmopfx Adwjdg Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Kdsdeu Nigkjpfx Adwsg Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Kdedpfxju Nigwj Adweg saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *