Used Dowel hole drilling machine for sale (85,958)

Dowel-hole drilling machine

Call

Condition: like new (used), Year of construction: 1999, Dowel and slot drilling machine GANNER GANNOMAT JUNIOR 323 very good condition, the machine is absolutely as good as new it comes from a 2-man joinery and has only some paint damage it can be used to mill long holes and drill dowel holes on 2 levels without re-clamping 380V, 1000 and 1500W through 2 speed ranges 1410 and 2810 rpm year of manufacture 1999 with the machine you can mill long holes for e.g. lock boxes and similar things or make all kinds of frame- dowel joints, right angle, butt and mitered ideal for the production of dowel connections in wood frame construction, furniture, door, window and staircase construction and for similar things due to the drilling on 2 levels, due to the grid and stops and due to the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical with 2 fold-out table extensions the machine needs a compressed air supply of 6bar (the air consumption is very low) clockwise rotation due to the 2 speed ranges, drills with large diameters can also be used without burning during drilling and the drills become blunt immediately, especially with hardwoods mills and drills very well and cleanly with 2 angle stops (a center stop and a side stop that can be used on both sides) in addition there is a miter fence at the front of the machine table there is a 4000mm long fence rail with 2 folding fences, the fence rail can be shortened or extended if necessary the workpiece clamping is done with 2 pneumatic clamping cylinders the height adjustment from one to the other drilling level is also pneumatic, the pneumatic switch for this is located at the front of the machine, this ensures a quick adjustment of the grids and the drilling levels the heights of the individual drilling levels can be read on 2 mechanical counters, above the counters there are adjusting screws with which the drilling heights can be adjusted with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right side can be quickly converted to slot milling, the machine can then be used without grid with 2 adjustable stops left and right and then has a working travel of max. 420mm in width the max. drill hole height is 100mm the max. drill hole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly the machine will be delivered and demonstrated by us personally for 220,00 Euro all over Germany, so you have no risk when buying, the delivery to Austria and the EU is also possible on request Qbb7rwz08 the machine table is 870mm wide, at the sides it is 140mm deep and in the middle it is 350mm deep professional machine, no hardware store scrap with the machine you can work immediately with 2 jaw drill chuck up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are OK and go easily

more

Listing

Oberkochen

6,774 km

Stegherr FD/E

€2,500

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1994, Pitch 1xBohrkopf mm Working width 3300 mm Boring depth max. 80 mm Workpiece thickness 150 mm Motor output 0,5 kW STEGHERR - Dowel drilling machine type FD/E ----- for the efficient dowelling of crossbars and slats, rungs and Door elements. The window and door dowel drilling machine is an extended FD and is equipped with a freely programmable PC control with a floppy disk drive and 14" screen equipped. Up to 1000 drilling patterns with 10 holes each can be saved and accessed via code numbers. Specially designed for window and Software developed by door manufacturers guarantees high cost-effectiveness and extreme precision. Part of this machine is a pre-built STEGHERR-NC STOP positioning device that positions the workpiece with an accuracy of +/- 1/ 10 mm in front of the drilling unit. Standard length of the stop for workpieces up to 3300 l. 1 single drill head and 4 vertically automatically controllable ones Heights. Horizontally 4-way turret manually adjustable. The machine is Hardware equipped with online capability. The software connection to the higher-level computer takes place according to effort. Bglxrpotfg0 Sale on behalf of our customer ----- (technical data according to the manufacturer - no guarantee!)

more

Listing

Raasdorf bei Wien

6,293 km

Dowel and row hole drilling machine

Ayen DB 1000 K23

€3,200

Oblong hole and dowel drilling machine

Call

Condition: ready for operation (used), Year of construction: 1980, Ayen Gw8t0nm Type DB 1000 K 23 Year of manufacture 1980 GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

more

Listing

Gerolzhofen

6,761 km

Hoffmann-Dübelfix DBL T 142

Call

Condition: used, Year of construction: 1995, with pneumatic stroke for drilling on 2 levels with rotatable drilling unit used, good condition, top equipment make Hoffmann-Dübelfix type DBL T 142 year of construction 1995 Masch.-Nr. 1342 CE type approved motor 1,4 / 1,8 kW workpiece support swivels to the right drill chuck 20 mm drilling depth 190 mm dowel drilling unit with 1 piece grid 12 mm workpiece stop motor speed 2 pieces 1400/2850 rpm. pneumatic stroke Gw38one digital displays aggregate rotatable / swiveling 63° - o - 63° workpiece clamp pneumatic 2 pieces line laser new price approx. 17.000,00 € space requirement approx. 1400 mm x 1200 mm x 1400 mm weight approx. 400 kg storage place 97447 Gerolzhofen, free loaded, unpacked handover in as-is condition as inspected without warranty and guarantee

more

Listing

Ehingen (Donau)

6,793 km

Dowel & Hole Line Drilling Machine

Hoffmann Dübelfix DB 19

€850

Deep hole drilling machine for valves

Call

Condition: ready for operation (used), Drilling unit (swiveling ) horizontal and vertical number of spindles 19 pitch between drilling spindles 32 mm maximum spindle center distance 576 mm drill holder: M 10 Cifqzwhpll drilling depth 75 mm swiveling drill unit 0-45- 90° passage width 1025 mm table height 900 mm outer dimensions approx. 1300 x 1050 x 1500 mm weight approx. 900 kg mobile version further technical data on request The data was taken from a brochure, therefore without guarantee

more

Listing

SAMAG Machine Tools GmbH TBM1-roto 200.4

Saalfeld/Saale

6,692 km

SAMAG Machine Tools GmbH TBM1-roto 200.4

€3,29,000

DEEP HOLE DRILLING MACHINE

Call

Condition: as good as new (ex-display), Year of construction: 2020, Machine description One-piece machine bed in stable, torsion-resistant welded steel construction with fixed drill bush holder and integrated chip sluice • Oil return and chip removal through chip lock • Chip sluice with Makrolon disc • Linear roller guides and ball screws for spindle and tailstock slides • Ergonomic and safety-oriented machine casing • Machine status light (green / yellow / red) • Workpiece positioning by controlled tailstock Clamping of the workpieces in clamping devices with collets (from Geiger & Haag) • Siemens 840 D SL CNC control for drilling axis (Z), tailstock axis (W) and main spindle • Electrical control cabinets with control cabinet temperature control without plug cabinet • Individual drives for the drilling spindles 1 CNC-controlled headstock/drilling axis (Z-axis) 1 CNC-controlled tailstock axis (W-axis) • All axes are driven by digital NC servomotors • Deep drilling technology programs for the valve • Pressure relief flap • Flushing gun for manual cleaning of the workpiece and tool side • Workpiece handling according to customer requirements • Central lubrication for Z and W axis • No coolant tank included • No coolant cooling unit included • With pulsator for breaking chips Technical specifications Drill diameter range 1.5 - 12.50 mm max. drilling depth in one go max. 200 mm Drill feed max. 5 m/min rapid traverses Headstock Z-axis 10 m/min Tailstock W axis 10 m/min Spindle distance 160 mm Drive AC main spindle drive per spindle (belt drive) at 100% ED, S1 3.3 kW at 40% ED, S6 5 kW Spindle speeds directly programmable 1.600-16.000 rpm Main spindle similar to VDI 3208, with hydraulic expansion chuck • Tool holder Ø 10 x 60 mm • HSK 50 spindle interface Rfalr • Internal coolant supply • Manual tool change Control Siemens 840 D SL • Color flat display with plain text display (touch) 15.6" • User interface in English • Tool monitoring by querying the torque of the main spindle • Digital drive control • USB interface • Deep drilling technology programs • Hard disk • Conversational Programming • Graphic machine status display Process monitoring (4-spindle) Tool breakage monitoring for each spindle Takes place by querying the torque of the main spindle and query the Z-axis load (drilling feed) Coolant pressure control Monitors the coolant pressure during the drilling process, in the event of a chip jam or if there is a lack of coolant, the drilling process will be in accordance with the specified limit values interrupted to avoid damage to the tool and/or workpiece. Torque and coolant pressure can be viewed on the process monitoring screen be presented and evaluated. If the specified limit values are exceeded, the drilling process is automatically interrupted. Workpiece clamping • consisting of 4 chucks on a base plate • the clamping device moves in the W axis for workpiece assembly, the clamping takes place in the chuck, then back into the drill bush • The clamping is initiated via a clamping unit by installed plate spring packages • the clamping can be released hydraulically Workpiece details • Preparation for valves with bore from stem to disc

more

Listing

Faridabad

886 km

UTITA AF200

Call

Condition: excellent (used), DEEP HOLE DRILLING MACHINE - DEEP HOLE DRILLING MACHINE Brand: UTITA Model: AF200 Min/Max drilling diameter capacity: 30-120 mm Max. boring diameter: 200 mm Max. workpiece diameter: 400 mm Drilling workpiece length : 5650 mm Spindle speed: 3400 rpm Other information: Bh27gsjkgai Machine equipped with u deep drilling tool.

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

CNC HOLE DRILLING MACHINE

DEMİRTEKNİK MAKİNA

€10,900

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2019, 1. 2 axes 2. Double head hole drilling 3. HMI screen 4. Manual vice 5. Axis controls are servo motor I8uesgabv 6. 2000 dv/min spindle speed 7. Suitable for Er40 clamp 8. It has the ability to load CAM programs 9. Length 1800mm. Width 1600 mm. Height 2400mm 10. 3000kg 11. Steel body 12. Baking paint 13. Panasonic driver 14. Pulser cnc controller 15. Rounds handwheel 16.Weintek display 17. Panasonic servo motor 1.5 kw 18.Powertime ups 19. Pilz safety barrier 20. Two-handed button operation

more

Listing

Halberstadt

6,724 km

CNC - deep hole drilling machine

TIBO M10-250NC

Call

Condition: used, Year of construction: 2002, Ref. -No.: 10142 Manufacturer: TIBO Type: M10-250NC Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bioa7vxswi9 Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

more

Listing

Lüneburg

6,777 km

Toshiba 757

Call

Condition: good (used), Drilling depth 8.000 mm Largest drilling diameter 250 mm Bed length to faceplate 25.000 mm Slide width 1.000 mm Drilling slide 2.400 mm Boza slide 1.800 mm face plate 2.000 mm Swing diameter over bed 2.000 mm Max. diameter steady rest approx. 1.800 mm R9to8lz 2 x vibration damper Extensive scope of delivery

more

Listing

Schwabach

6,707 km

Fitting and hole line drilling machine

IXION TL 1001

Call

drilling depth: 1,000 mm, Condition: good (used), Year of construction: 1997, Seller = first owner and has used the machine in his own tool shop ! No contract manufacturing ! A large number of drilling tools are also supplied. . Machine is still at the owner's premises in Bavaria / Franconia and can still be demonstrated there. Bikmnwat98c CNC-control MITSUBISHI M3 1 CNC axis, Z = drilling movement Tool holder SK 40 Coolant system 50 bar , 25 l/min Spindle speeds 100 - 4000 rpm .

more

Listing

Bitburg

7,034 km

Grass BBM-R

€2,350

Frame dowel drilling machine

Call

Condition: excellent (used), Year of construction: 1993, Grass fitting and hole line drilling machine used, good condition type BBM-R year of manufacture 1993 machine no. 9306342 vertical boring head 1. fitting 2. fitting 3. fitting Turret for selection of drilling head Hole row drilling head with pins number of spindles in row 15 pieces with press-in die 1 piece Fence rulers Pendulum stops Cwozd2uezi storage location 54634 Bitburg, free on truck, unpacked Delivery in as-is condition as viewed

more

Listing

D - Bayern

6,672 km

Ganner LBM Junior

Call

Condition: used, Year of construction: 1993, Second hand machine Year of manufacture: 1993 Frame dowel and slot drilling machine two-jaw chuck for tools up to 20 mm shank diameter Motor 1,5 kW Bd2locsb97b Position adjustment for 2 levels, pneumatic (0-100 mm) Drilling depth max. 150 mm Precision grid rail with 12 mm grid with center engagement and cross adjustment 320 mm 2 pneumatic safety clamping cylinders slot drilling device lowerable with 2 program cams Availability: short term Location: Röllbach

more

Listing

Babberich

7,060 km

Cup drilling machine and hole line

Degen UTB 1000 H CNC

Call

Condition: good (used), Year of construction: 1999, Manufacturer: DEGEN Type: UTB 1000 H CNC Control: HeidenHain TNC 124 Year of construction: 1999 Specifications: Metric Metric US Standard Max. Drill Ø steel 5 - 32 mm Drilling depth 1000 mm X - axis 1300 mm Y - axis 600 mm Z - axis 1000 mm W - axis 500 mm Table load 5000 Table dimensions / L x W or ø 1400 x 800 mm Spindle holder Sk-50 Mk Spindle power 10 kW Spindle speed 0 - 4000 Rpm Dimensions (estimate) length 4000 mm width 3500 mm height Lryznjpnjv 2800 mm weight 5500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

more

Listing

Zeil am Main

6,743 km

Hettich Blue Max

€2,100

Magnet Drilling Machine, Magnet - Drilling Machine Core Hole

Call

Condition: good (used), Functionality: fully functional, Blue Max with substructure and rulers right and left, with additional drilling gear for Blum hinges Ja9ssvkh9 Rich drill included

more

Listing

Hessisch Lichtenau

6,811 km

DR. BENDER / KOCH EK 323

€800

CNC deep hole drilling machine

Call

Condition: used, Year of construction: 1988, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide G7td2lx - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

more

Listing

Weihenzell

6,739 km

BUCK TB 1000 CNC

Call

Condition: good (used), Year of construction: 2012, 4 axis coordinates deep hole drilling machine BUCK TB 1000 CNC Equipped for deep hole drilling and milling Year of construction 2012 Drilling range 4-32 mm Drilling depth 1050 mm in one go X travel 1000 mm Y travel 650 mm Fa23xzz9l W travel 450 mm B-axis 1500x1000 mm (manual 0-360 degrees) Table load 2,500 kg Spindle speed 0-6000 rpm. Main spindle drive 7.5 kW Heidenhain TNC 620 incl. handwheel chip conveyor High pressure coolant system 0-100 bar 2-fold support bezel

more

Listing

Bruchsal

6,890 km

Construction and hole line drilling machine

MEWAG - IXION TL 500

Call

Condition: good (used), Deep hole drilling machine / MEWAG - IXION TL 500 -Drilling depth approx. 500mm -table size 800x450mm -Table rotatable/angle adjustable -Drilling stroke / by hand -Drill chuck -Various tools 2juewbf Dimensions: LxWxH 1.6x0.8x1.6 meters Weight approx. 1250 kg Errors / input errors excepted

more

Listing

D - Hessen

6,848 km

Ganner Delta Star Typ 80

€2,500

Hole line drilling machine 32mm

Call

Condition: used, Year of construction: 1985, Second hand machine Year of manufacture: 1985 Condition: Function tested Technical data: For construction drilling horizontally and vertically For hole line drilling vertical in 32 mm grid Drilling unit vertical with double spindle drilling heads freely positionable on index shaft I8qgcp0dk 1.5 kW motor with 1400 rpm. 1.5 kW motor with 2800 rpm. drilling heads with pneumatic stroke pneumatic material clamps passage width approx. 850 mm Incl. various stops and drills Location: Hochheim Availability: Short term

more

Listing

Buch am Erlbach

6,630 km

Gannomat DS-75 elektronik

€2,700

ONO VAT not applicable

Call

total width: 130 cm, total length: 130 cm, total height: 116 cm, Condition: excellent (used), Year of construction: 1989, machine/vehicle number: 085 944, A used hole line drilling machine is being sold as a three-sided pull-through dowel boring machine with stops and setting gauges. - Flat boring bar with 25 spindles, pitch 32mm Dmx3wn - End beam with 50 double spindles, pitch 32mm (25 front and 25 rear) No more time-consuming and difficult turning of long workpieces necessary without drill

more

Listing

Wijchen

(dealership location)

7,087 km

Multi-spindle drilling machine Dowel drilling SCM

SCM MB21

€2,950

ONO VAT not applicable

Call

Condition: used, Year of construction: 2005, Multi-spindle drilling SCM MB21 Number of spindles 21 Dimension between spindles 32 mm Dimension between first and last spindle 640 mm Max drilling depth 60 mm Table dimensions 905 x 360 mm Motor power 1.5kW, 2800 rpm Klxswyexl9 Total dimensions 1000 x 1150 x 1300 mm, 280 kg

more

Listing

Brandenburg an der Havel

6,627 km

CNC drilling and dowel inserting machine

Koch SPRINT-PT-3/1800

Call

Condition: excellent (used), Year of construction: 2012, Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel 9euziv3hgh - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

more

Listing

Neuss

7,022 km

CNC deep hole drilling machine

SFT / GILDEMEISTER B4B-4000-CNC

€1,15,000

Start hole drilling machine

Call

Condition: good (used), Make: SFT / GILDEMEISTER, type: B4B-4000-CNC, year of manufacture: 1986, PLC control Siemens, drilling depth max. 4,000 mm, circulation Ø max. 800 mm, max. drilling capacity solid drilling Ø 160 mm, core drilling Ø 300 mm, boring single-edged/multi-edged Ø 400 mm, drilling spindle drive 75 kW, spindle bore 120 mm, drilling spindle speed range 1-2.000 rpm, feed range 1-2,000 mm/min, rapid traverse 4,000 mm/min, headstock workpiece rotation 19 kW, speed 2-50 rpm, spindle orientation, steady rest, coolant system, chip conveyor, hydraul. Vibration damper, revision in 2010 +++ Attention: this machine is part of an online auction! +++ Zfbrbq7u

more

Listing

Kißlegg

6,788 km

CHARMILLES HD10

€12,000

Call

Condition: good (used), Year of construction: 2007, Charmilles HD10 Star Hole EDM Machine Frlaz8mah

more

Listing

D - Nordrhein-Westfalen

6,955 km

Dowel Drilling Machine

Holzkraft MDB 21 PRO

€5,898

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Rated operation mode drive motorS3 Supply voltage400V Crw8djqlfd Mains frequency50Hz Noise emission Sound pressure level78,3dB(A) Pneumatic connection Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

more

Listing

Mörsdorf

6,664 km

CNC Deep hole drilling machine

TBT Tiefbohrtechnik T 10-250 gesteuert

Call

Condition: used, Year of construction: 1989, Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250 machine-no. 418.311.215, year of construction 1989 with control SIMATIC S5 technical data: max. drilling depth 250 mm Bgcgoqwahs7 table size 420 x 780 mm drilling range steel ST 60 full drilling max 16 mm reaming max 20 mm drilling method ELB (single lip drilling) Number of drilling spindles 1 Main spindle drive 2,6/ 3,2 kW Speeds 1020 - 4400 rpm 1960 - 2950 rpm 2950 - 4400 rpm 4400 - 8950 rpm Filter plate gap filter 60 l/min cooling lubrication system 670 l deep drilling oil electrical connection 380 V, 15 kW outer dimensions of the plant incl. SS L x W x H 3850 x 1800 x 2000 mm weight approx. 2200 kg with - control SIMATIC S5 115 U ELGO 85 P - separate switch cabinet - internal cooling - various single lip drills (see photos) - workpiece counter - coolant system - filter - central lubrication unit used, in good condition SPECIAL PRICE ex stock Mörsdorf

more

Listing

Oisterwijk

7,126 km

Ixion TL1004

Call

drilling depth: 1,000 mm, motor power: 5,500 W, workpiece weight (max.): 2,000 kg, Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 950344, Gun drilling machine D7sygps Control Mitsubishi 530 Drilling capacity in steel 32mm Speed 100-4000 RPM Milling is also possible with the machine Spindle taper ISO 40 Din 69871 Can be demonstrated under power

more

Listing

Kaufungen

6,818 km

Start hole drilling machine

Castek ED24

Call

Condition: good (used), Year of construction: 2007, used starting hole drilling machine make Castek type ED 24 year 2007 Bhqadj0y technical data X-axis 400 mm Y-axis 250 mm Z-axis 370 mm clamping surface 450 x 260 mm Electrode diameter 0.3 - 3.0 mm Machining fluid Dest. water Machine weight 650 Kg Working current 5 KVA Digital display

more

Listing

Rietberg

6,907 km

Ayen dowel hole boring machine

Ayen ABMH 66

€1,500

Fixed price VAT not applicable

Call

Condition: ready for operation (used), Year of construction: 1996, The machine is in operation. Cqmk0pu9

more

Listing

Wiefelstede

6,930 km

Dowel drilling machine

BILEK Dübelfix

€1,250

Slot and dowel drilling machine

Call

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear X38m0kqh3 -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

more

Listing

Gerolzhofen

6,761 km

Ganner Junior LBM320

€5,200

Deep hole drilling machine /deep hole drilling rig

Call

Condition: used, Year of construction: 1992, with pneumatic stroke for drilling on 2 levels used, top equipment, many accessories make Ganner type Junior LBM320 year of construction 1992 Masch.-no. 832263 Motor 1,5 kW drill chuck 20 mm two-jaw adapter plate for drill head mounting multi-spindle drill head 8 spindles 32-32-32 / 25-25 / 32-32-35 / U = 25-25 dowel drilling device with grid Bnov77z2ls workpiece stop on both sides 2-part r - li miter fence 45° center fence basic fence 1100 mm with pendulum fences 4 pieces r li each 1500 mm pneumatic stroke workpiece clamp pneumatic 2 new price approx. 17.000,00 € storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

LOCH TB 2-11/300/2 (Tiefe 300 mm) Siemens St.

Mörsdorf

6,664 km

LOCH TB 2-11/300/2 (Tiefe 300 mm) Siemens St.

Call

Condition: used, Year of construction: 1991, Deep hole drilling machine /deep hole drilling rig make LOCH type TB 2-11/300/2 make # 182-300-1970, year of construction 1991 Technical data: Bgcdjdg28i3 Drilling depth with plunging spindle max. 300 mm workpiece diameter/ full drilling range in steel 4 - 18 mm number of spindles 2 Drilling system ELB drilling method rotating tool counter-rotating workpiece working stroke, full + reaming max. 1000 mm center height 249,9 mm main spindle speed 96 - 2500 rpm. speed steps 4 feed stepless 0 - 1000 mm/min rapid traverse forward + backward 6 m/sec. tapping feed 60% spindle adaptor DIN 55022 size 5 working pressure 200 bar Motor power main drive 15/19 kW Engine power counter-rotating walking stick 5,5 kW total weight approx. 8,0 t further data see AWF-card with - control SIEMENS SPS-S5-115 U - 2 drilling spindles - chip conveyor - cooling device used, in good condition

more

Listing

Mönchengladbach

7,046 km

Start hole drilling machine

Backus APOS 350

Call

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: 350250980324, starting hole drilling machine make: Backus, type: APOS 350, SN: 350250980324, year: 1999, drill head no.: 1001-145, power: 5 kVA, 380 V, 16 A, digital display, water treatment 2duhj72oe

more

Listing

Wiesbaden

(dealership location)

6,914 km

dowel drilling machine Ayen DB 1000-B23

HEIDENREICH & HARBECK B 2 P 2

Call

Condition: used, Year of construction: 1973, height from bed to centre of drill: 315 mm max. reaming Ø: 178,3 mm bed length: 9400 mm drilling depth approx.: 3150 mm feed range stepless: 70 - 1750 mm/min rapid traverse speed: 4,25 m/min drilling headstock, bore: 62 mm main spindle speed: 180 - 1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6,6 t M7m3il

more

Listing

Tauberbischofsheim

6,809 km

Ayen DB 1000-B23

€1,750