➤ Used Dowel Drilling Machine for sale 🏷️ on Machineseeker India ⚙️✔️

Listing

D - Bayern

6,672 km

Frame dowel drilling machine

Ganner LBM Junior

Call

Condition: used, Year of construction: 1993, Second hand machine Year of manufacture: 1993 Frame dowel and slot drilling machine two-jaw chuck for tools up to 20 mm shank diameter Motor 1,5 kW Position adjustment for 2 levels, pneumatic (0-100 mm) Drilling depth max. 150 mm Precision grid rail with 12 mm grid with Bd2locsb97b center engagement and cross adjustment 320 mm 2 pneumatic safety clamping cylinders slot drilling device lowerable with 2 program cams Availability: short term Location: Röllbach

more

Listing

GANNOMAT Lieferung nach D und in EU JUNIOR 323 mit Raster und 2 Ebenen TOP

Rodeberg

6,769 km

Long Hole Drilling Machine Dowel Drilling Machine

GANNOMAT Lieferung nach D und in EU JUNIOR 323 mit Raster und 2 Ebenen TOP

€7,660

ONO plus VAT

Call

Condition: like new (used), Year of construction: 1999, Dowel and slot drilling machine GANNER GANNOMAT JUNIOR 323 very good condition, the machine is absolutely as good as new it comes from a 2-man joinery and has only some paint damage it can be used to mill long holes and drill dowel holes on 2 levels without re-clamping 380V, 1000 and 1500W through 2 speed ranges 1410 and 2810 rpm year of manufacture 1999 with the machine you can mill long holes for e.g. lock boxes and similar things or make all kinds of frame- dowel joints, right angle, butt and mitered ideal for the production of dowel connections in wood frame construction, furniture, door, window and staircase construction and for similar things due to the drilling on 2 levels, due to the grid and stops and due to the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical with 2 fold-out table extensions the machine needs a compressed air supply of 6bar (the air consumption is very low) clockwise rotation due to the 2 speed ranges, drills with large diameters can also be used without burning during drilling and the drills become blunt immediately, especially with hardwoods mills and drills very well and cleanly with 2 angle stops (a center stop and a side stop that can be used on both sides) in addition there is a miter fence at the front of the machine table there is a 4000mm long fence rail with 2 folding fences, the fence rail can be shortened or extended if necessary the workpiece clamping is done with 2 pneumatic clamping cylinders the height adjustment from one to the other drilling level is also pneumatic, the pneumatic switch for this is located at the front of the machine, this ensures a quick adjustment of the grids and the drilling levels the heights of the individual drilling levels can be read on 2 mechanical counters, above the counters there are adjusting screws with which the drilling heights can be adjusted with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right side can be quickly converted to slot milling, the machine can then be used without grid with 2 adjustable stops left and right and then has a working travel of max. 420mm in width the max. drill hole height is 100mm the max. drill hole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly the machine will be delivered and demonstrated by us personally for 220,00 Euro all over Germany, so you have no risk when buying, the delivery to Austria and the EU is also possible on request the machine table is 870mm wide, at the sides it is 140mm deep and in the middle it is 350mm deep Qbb7rwz08 professional machine, no hardware store scrap with the machine you can work immediately with 2 jaw drill chuck up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are OK and go easily

more

Listing

Wijchen

(dealership location)

7,087 km

Multi-spindle drilling machine Dowel drilling SCM

SCM MB21

€2,950

ONO VAT not applicable

Call

Condition: used, Year of construction: 2005, Multi-spindle drilling SCM MB21 Number of spindles 21 Dimension between spindles 32 mm Dimension between first and last spindle 640 mm Max drilling depth 60 mm Table dimensions 905 x 360 mm Motor power 1.5kW, 2800 rpm Total dimensions 1000 x 1150 x 1300 mm, 280 kg Klxswyexl9

more

Listing

Oberkochen

6,774 km

Dowel-hole drilling machine

Stegherr FD/E

€2,500

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1994, Pitch 1xBohrkopf mm Working width 3300 mm Boring depth max. 80 mm Workpiece thickness 150 mm Motor output 0,5 kW STEGHERR - Dowel drilling machine type FD/E ----- for the efficient dowelling of crossbars and slats, rungs and Door elements. The window and door dowel drilling machine is an extended FD and is equipped with a freely programmable PC control with a floppy disk drive and 14" screen equipped. Up to 1000 drilling patterns with 10 holes each can be saved and accessed via code numbers. Specially designed for window and Software developed by door manufacturers guarantees high cost-effectiveness and extreme precision. Part of this machine is a pre-built STEGHERR-NC Bglxrpotfg0 STOP positioning device that positions the workpiece with an accuracy of +/- 1/ 10 mm in front of the drilling unit. Standard length of the stop for workpieces up to 3300 l. 1 single drill head and 4 vertically automatically controllable ones Heights. Horizontally 4-way turret manually adjustable. The machine is Hardware equipped with online capability. The software connection to the higher-level computer takes place according to effort. Sale on behalf of our customer ----- (technical data according to the manufacturer - no guarantee!)

more

Listing

Brandenburg an der Havel

6,627 km

CNC drilling and dowel inserting machine

Koch SPRINT-PT-3/1800

Call

Condition: excellent (used), Year of construction: 2012, Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure 9euziv3hgh - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

more

Listing

Raasdorf bei Wien

6,293 km

Dowel and row hole drilling machine

Ayen DB 1000 K23

€3,200

Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1980, Ayen Type DB 1000 K 23 Gw8t0nm Year of manufacture 1980 GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

more

Listing

D - Nordrhein-Westfalen

6,955 km

Dowel Drilling Machine

Holzkraft MDB 21 PRO

€5,898

ONO plus VAT

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Rated operation mode drive motorS3 Supply voltage400V Mains frequency50Hz Noise emission Sound pressure level78,3dB(A) Pneumatic connection Crw8djqlfd Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

more

Listing

Wiefelstede

6,930 km

Dowel drilling machine

BILEK Dübelfix

€1,250

Fixed price plus VAT

Call

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm X38m0kqh3 -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

more

Listing

Gerolzhofen

6,761 km

Slot and dowel drilling machine

Ganner Junior LBM320

€5,200

Fixed price plus VAT

Call

Condition: used, Year of construction: 1992, with pneumatic stroke for drilling on 2 levels used, top equipment, many accessories make Ganner Bnov77z2ls type Junior LBM320 year of construction 1992 Masch.-no. 832263 Motor 1,5 kW drill chuck 20 mm two-jaw adapter plate for drill head mounting multi-spindle drill head 8 spindles 32-32-32 / 25-25 / 32-32-35 / U = 25-25 dowel drilling device with grid workpiece stop on both sides 2-part r - li miter fence 45° center fence basic fence 1100 mm with pendulum fences 4 pieces r li each 1500 mm pneumatic stroke workpiece clamp pneumatic 2 new price approx. 17.000,00 € storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

more

Listing

Tauberbischofsheim

6,809 km

dowel drilling machine Ayen DB 1000-B23

Ayen DB 1000-B23

€1,750

ONO plus VAT

Call

Condition: used, Working width: 720 mm working width: 820 mm Max. passage: 45 mm Max throughput: 120 mm Drilling depth vertical: 45 mm, horizontal: 120 mm Cxbn7ggfly

more

Listing

66140 Malax, Finnland

6,355 km

Dowel Drilling Machine AYEN SKB 50

Ayen SKB 50

€3,900

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1984, Dowel Drilling Machine AYEN SKB 50 Manufacturer AYEN Model SKB 50 Year of manufacture 1984 S/N 8411346 Cnlbf0ca Total 50 spindles in (2) swivel heads with (25) spindles each drills vertically from above and horizontally from behind drills in any angle between 0° - 90° with a positive stop at 45° working width 768mm / passage 1000mm 50-spindle swivel head assembly quickly converts to (2) 25-spindle heads for double row drilling, 5-1/8" minimum distance between heads for row drilling. 3 HP - 3,450 RPM gear motor, 39" plate width with a 30-1/4" drilling width. Complete with: (2) 39" stops with flip stops, (3) pneumatic "Quick Set" hold-downs, Foot pedal control for drill cycle/head positioning. Motors, 3 phases, 380 V / 50 Hz Compressed air consumption 9l / cycle Weight 490 Kg

more

Listing

Ehingen (Donau)

6,793 km

Dowel & Hole Line Drilling Machine

Hoffmann Dübelfix DB 19

€850

Fixed price plus VAT

Call

Condition: ready for operation (used), Drilling unit (swiveling ) horizontal and vertical number of spindles 19 pitch between drilling spindles 32 mm maximum spindle center distance 576 mm Cifqzwhpll drill holder: M 10 drilling depth 75 mm swiveling drill unit 0-45- 90° passage width 1025 mm table height 900 mm outer dimensions approx. 1300 x 1050 x 1500 mm weight approx. 900 kg mobile version further technical data on request The data was taken from a brochure, therefore without guarantee

more

Listing

Bayern, Deutschland

6,672 km

Sawing, drilling and dowel inserting machine

KOCH SBD-B-Universal-NC

€3,000

EXW ONO plus VAT

Call

Condition: not inspected (used), Year of construction: 1988, double-sided automatic operation loading magazine workpiece length 300 - 2000 mm workpiece width 30 -140 mm workpiece thickness 15 - 50 mm Horizontal and vertical drilling Dowel hole blowing nozzles Glue application and dowel insertion station dowel Ø 10 mm dowel length 40 - 65 mm Dowel projection 15 - 25 mm Hydraulic clamping Width adjustment with digital display The workpieces are transported through the work stations by cam chains. Workpiece return transport freely programmable electronic control with microprocessor, me Cee2lq32xq automatic work program, automatic motor start-up and fault indication fault indication from site, for self dismantling

more

Listing

Wiefelstede

(dealership location)

6,929 km

Dowel drilling machine

Scheer DB5

€2,750

Fixed price plus VAT

Call

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Workpiece clamping; pneumatic -Number of drills: 21 pieces. 32 mm grid -Bore head: swiveling -Bore depth: max. 80 mm -Height adjustment: max. 80 mm -Underframe: transport castors that can be steered on 4 pieces Bnc3i2vyio -Dimensions: 1090/1330 / H1460 mm -Weight: 433 kg

more

Listing

Gerolzhofen

6,761 km

Slot and dowel drilling machine

Hoffmann HR 150 P

€8,300

Fixed price plus VAT

Call

Condition: used, Year of construction: 1994, with stop system r - l with pneum. drill feed and chipping device with multi-spindle drill head with 8 drill spindles used, top condition, top equipment, many accessories make Hoffmann type HR 150 P year of construction 1994 machine no. 16002 work piece support right left swiveling drill holder shank chuck adapter plate for drill head holder dowel drilling device raster work piece stop center stop 2 pcs. stop ruler 2100 mm with folding stops pcs. 4 - r left pneumatic stroke digital displays automatic feed 7ji7u9i workpiece clamp pneumatic 2 new price approx. 18.000,00 € suction connection D 80 mm space requirement approx. 1100 mm x 1100 mm x 1200 mm weight approx. 450 kg storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without guarantee and warranty

more

Listing

Leopoldshöhe

6,884 km

Drilling and Dowel Insertion Machine

KOCH WINDOOR-10

Call

Condition: reconditioned (used), Year of construction: 2011, machine/vehicle number: A1101/8010, 3 controlled axes for drilling and dowelling of window and door components. Equipment: - Horizontal drilling station - Glueing and dowel insertion station Cdc2pejdzf Stock dimensions Stock length min. 200 mm Stock width min. 20 mm Stock thickness 30 - 100 mm Dowel diameter 8 or 10 mm Dowel length 60 mm Dowel projection variable Partial refurbished in the manufacturer's plant. The machines has been tested and is fully functional. Replacement of all broken parts.

more

Listing

Gronau (Westfalen)

6,996 km

Scheer dowel drilling and driving machine

Scheer BS 5102

Call

Condition: good (used), Year of construction: 1999, Make: Scheer Pzajuq Type: BS 5102 Year: 1999 Power: 3,5kW Working width: 1500mm

more

Listing

Gerolzhofen

(dealership location)

6,761 km

Dowel drilling machine

Ganner Superdrill 300

€1,950

Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, used, great condition, little runMake GannerType Superdrill 300Year of manufacture 1990Machine no. 656 952Number of drilling beams 1Number of spindles 19 piecesSpindle distance / grid 32 mmDrilling from belowswiveling manuallyhydraulic feed brakeWorking width approx. 700 mmDrilling depth 95 (110) mmDrill holder D 10 mmPendulum stops 5 piecesClamp 3 piecesmobileHole line drilling deviceFrame dowel deviceSpace requirement approx. 1200 mm x 1000 mm x 1200 mmTotal connected load 1.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Bwgdrhtoow

more

Listing

Gerolzhofen

6,761 km

Oblong hole and dowel drilling machine

Hoffmann-Dübelfix DBL T 142

Call

Condition: used, Year of construction: 1995, with pneumatic stroke for drilling on 2 levels with rotatable drilling unit used, good condition, top equipment make Hoffmann-Dübelfix type DBL T 142 year of construction 1995 Masch.-Nr. 1342 CE type approved motor 1,4 / 1,8 kW workpiece support swivels to the right drill chuck 20 mm drilling depth 190 mm dowel drilling unit with 1 piece grid 12 mm workpiece stop motor speed 2 pieces 1400/2850 rpm. pneumatic stroke digital displays Gw38one aggregate rotatable / swiveling 63° - o - 63° workpiece clamp pneumatic 2 pieces line laser new price approx. 17.000,00 € space requirement approx. 1400 mm x 1200 mm x 1400 mm weight approx. 400 kg storage place 97447 Gerolzhofen, free loaded, unpacked handover in as-is condition as inspected without warranty and guarantee

more

Listing

Mediniai Strėvininkai

5,912 km

Dowel Drilling Machines

Call

Condition: good (used), The machine drills top and bottom at a 45 degree angle 4 drills above and 4 drills below You can call or write us. We can speak and write German and Russian. You can also send messages in English. Knzrmghq 5.3.2

more

Listing

Prenzlau

6,549 km

Carpentry drilling machine for GEKA dowels

MAFELL K

€249

Fixed price plus VAT

Call

Condition: ready for operation (used), Used MAFELL carpentry drilling machine with drilling frame and drilling tool for GEKA dowels Technical data: - Voltage 400 V - Speed 2.900 UPM The machine is visually in acceptable condition, workshop tested and in working order. Pickup preferred - shipping by freight forwarding possible for an additional charge. You will receive an invoice with VAT. Bahcax8mt8u

more

Listing

Telfs

6,696 km

Dowelhole drilling machine

Gannomat DB 21-27-35

Call

Condition: new, Year of construction: 2023, Precise and accurate multi boring machine for casegoods, furniture fittings, line drilling and framework in SYSTEM 32 mm. The DB is a semi automatic boring machine with 21, 27 or 35 precision drilling spindles. Short introduction: • Universal drilling machine for panel and solid wood construction • Holes in the SYSTEM 32 mm Hgd73jg2i • Massive precision drilling unit from GANNOMAT • Easy settings via mechanical digital counters for side and front stops and for drilling height position • Tool-less quick-change system for stopping ruler • Dowel holes, row of holes as well as line drilling, all kind of furniture connectors, handle and through holes, hinges, 3- 5- 7-hole groups, boreholes for drawer slides and guides, holes for door frames and table legs, etc.

more

Listing

Mediniai Strėvininkai

5,912 km

Dowel Drilling Machines

Scheer DB 4

Call

Condition: excellent (used), You can call or write us. We can speak and write German and Russian. You can also send messages in English. 5.1.2. Gq7qlikwj

more

Listing

Mediniai Strėvininkai

5,912 km

Dowel Drilling Machines

Steton Alfa 21R

Call

Condition: excellent (used), You can call or write us. We can speak and write German and Russian. You can also send messages in English Huyj38g 5.1.1.

more

Listing

SAMAG Machine Tools GmbH TBM1-roto 200.4

Saalfeld/Saale

6,692 km

Deep hole drilling machine for valves

SAMAG Machine Tools GmbH TBM1-roto 200.4

€3,29,000

ONO plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2020, Machine description One-piece machine bed in stable, torsion-resistant welded steel construction with fixed drill bush holder and integrated chip sluice • Oil return and chip removal through chip lock • Chip sluice with Makrolon disc • Linear roller guides and ball screws for spindle and tailstock slides • Ergonomic and safety-oriented machine casing • Machine status light (green / yellow / red) • Workpiece positioning by controlled tailstock Clamping of the workpieces in clamping Rfalr devices with collets (from Geiger & Haag) • Siemens 840 D SL CNC control for drilling axis (Z), tailstock axis (W) and main spindle • Electrical control cabinets with control cabinet temperature control without plug cabinet • Individual drives for the drilling spindles 1 CNC-controlled headstock/drilling axis (Z-axis) 1 CNC-controlled tailstock axis (W-axis) • All axes are driven by digital NC servomotors • Deep drilling technology programs for the valve • Pressure relief flap • Flushing gun for manual cleaning of the workpiece and tool side • Workpiece handling according to customer requirements • Central lubrication for Z and W axis • No coolant tank included • No coolant cooling unit included • With pulsator for breaking chips Technical specifications Drill diameter range 1.5 - 12.50 mm max. drilling depth in one go max. 200 mm Drill feed max. 5 m/min rapid traverses Headstock Z-axis 10 m/min Tailstock W axis 10 m/min Spindle distance 160 mm Drive AC main spindle drive per spindle (belt drive) at 100% ED, S1 3.3 kW at 40% ED, S6 5 kW Spindle speeds directly programmable 1.600-16.000 rpm Main spindle similar to VDI 3208, with hydraulic expansion chuck • Tool holder Ø 10 x 60 mm • HSK 50 spindle interface • Internal coolant supply • Manual tool change Control Siemens 840 D SL • Color flat display with plain text display (touch) 15.6" • User interface in English • Tool monitoring by querying the torque of the main spindle • Digital drive control • USB interface • Deep drilling technology programs • Hard disk • Conversational Programming • Graphic machine status display Process monitoring (4-spindle) Tool breakage monitoring for each spindle Takes place by querying the torque of the main spindle and query the Z-axis load (drilling feed) Coolant pressure control Monitors the coolant pressure during the drilling process, in the event of a chip jam or if there is a lack of coolant, the drilling process will be in accordance with the specified limit values interrupted to avoid damage to the tool and/or workpiece. Torque and coolant pressure can be viewed on the process monitoring screen be presented and evaluated. If the specified limit values are exceeded, the drilling process is automatically interrupted. Workpiece clamping • consisting of 4 chucks on a base plate • the clamping device moves in the W axis for workpiece assembly, the clamping takes place in the chuck, then back into the drill bush • The clamping is initiated via a clamping unit by installed plate spring packages • the clamping can be released hydraulically Workpiece details • Preparation for valves with bore from stem to disc

more

Listing

Alemdar, 2. Sk. No:58, 16190 Osmangazi/Bursa, Türkiye

5,185 km

ALUMINUM CUTTING - DRILLING AND TAPPING-

MAKENSİS MACHINE MKS 500 -ALUMINUM PROCESSING SOLUTIONS

Call

Condition: new, Year of construction: 2023, FULL AUTOMATIC SERVO SYSTEM ALUMINUM - PVC CUTTING, DRILLING AND DRILLING MACHINE GENERAL FEATURES : The feed rate of the servo – contrlolled saw in the Z axis can be adjusted precisely according to the profile Cfdn9g30dg The aluminum profile is cut to the desired size with a servo-controlled robot arm. Ø500 saw is used. The saw speed is 3000 rpm. The robot arm drag and drop system allows precise cutting of long-length profiles. Cutting-drilling and threading operation continues until the end of the profile with automatic cycle after the profile is placed. It provides high guality and easy cutting A high level of security is provided by the magnetic safety switch and piston on the covers All movements of the machine are servo system. Drilling unit x – y – z movements are servo. Optional spindle can be added for drilling from different angles. Chip extraction system is available There is a spray cooling system in the saw and drilling unit. Air consumption: 30 lt/min Total kW: 3.8 kWh OMRON PLC Control system SMC - FESTO pneumatic system Possibility to create a cut list

more

Listing

Faridabad

886 km

DEEP HOLE DRILLING MACHINE

UTITA AF200

Call

Condition: excellent (used), DEEP HOLE DRILLING MACHINE - DEEP HOLE DRILLING MACHINE Brand: UTITA Model: AF200 Min/Max drilling diameter capacity: 30-120 mm Max. boring diameter: 200 mm Bh27gsjkgai Max. workpiece diameter: 400 mm Drilling workpiece length : 5650 mm Spindle speed: 3400 rpm Other information: Machine equipped with u deep drilling tool.

more

Listing

Добрич

5,355 km

Machine for cutting, drilling and edging

Neptun Quick Mill

€28,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2016, Machine in very good condition, very good condition. Very easy to use software. Quick and straight machines. Corqsbx

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

CNC HOLE DRILLING MACHINE

DEMİRTEKNİK MAKİNA

€10,900

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2019, 1. 2 axes 2. Double head hole drilling I8uesgabv 3. HMI screen 4. Manual vice 5. Axis controls are servo motor 6. 2000 dv/min spindle speed 7. Suitable for Er40 clamp 8. It has the ability to load CAM programs 9. Length 1800mm. Width 1600 mm. Height 2400mm 10. 3000kg 11. Steel body 12. Baking paint 13. Panasonic driver 14. Pulser cnc controller 15. Rounds handwheel 16.Weintek display 17. Panasonic servo motor 1.5 kw 18.Powertime ups 19. Pilz safety barrier 20. Two-handed button operation

more

Listing

Uttendorf

6,549 km

CNC - Bench drilling machine

TOS VARNSDORF WHQ 80

€38,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Spindle diameter 129 mm Spindle length ISO 50 Bimph7fqkdr X - axis 1,600 mm Y - axis 950 mm Z - axis 1,000 mm Spindle speeds 14 - 2,240 mm Table clamping surface 1,600 x 850 mm Control HEIDENHAIN i 530 The machine was overhauled in 2012, all motors, the entire electrical system and the control system were replaced

more

Listing

Deutschland

6,760 km

Radial Drilling Machine

CSEPEL RFh 75/2000

Call

Condition: used, machine/vehicle number: 76025,

more

Listing

Deutschland

6,760 km

Upright Drilling Machine

ACIERA 22VR

Call

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 2-22 mm Blfufm8nt throat 500 mm bore stroke 120 mm table-size 650 x 310 mm turning speeds 40-3600 U/min total power requirement 1 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 0,9 m Bench and pillar drill ACIERA 22VR, very good condition, from training workshop.

more

Listing

Halberstadt

6,724 km

CNC - deep hole drilling machine

TIBO M10-250NC

Call

Condition: used, Year of construction: 2002, Ref. -No.: 10142 Manufacturer: TIBO Type: M10-250NC Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm L8nj2y8ard Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

more

Listing

D - Bayern

6,672 km

Universal dowel boring machine

Ganner Optima 21

Call

Condition: used, Year of construction: 2001, Second hand machine Year of manufacture: 2001 Condition: Maintained/Function tested Equipment and technical data: Jcmmamyga Number of drilling spindles: 21 pcs. in 32 mm pitch. drilling direction: bottom & face Swivel: 0-90 degrees from by hand wheel Pneumatic material clamps: 3 pcs. Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1,5 kW Diameter suction: 120 mm Incl. a wide range of stops Availability: short term Storage location: Röllbach

more

Listing

Hessisch Lichtenau

6,811 km

Column drilling machine

IMATEC AV-32

€2,900

Fixed price plus VAT

Call

Condition: used, Year of construction: 1995, Column drilling machine IMATEC type AV-32 Machine No. 1775-1 Year of construction approx. 1995 drilling capacity 32 mm spindle mounting MK 3 long spindle sleeve throat 300 mm pinol stroke 150 mm table size 420 x 300 mm column diameter 125 mm spindle speed 80-1170 rpm infinitely variable Bcv00hldarp motor power 0,9 and 1,5 kW pole changeable mains connection 380 volt, 50 Hz - 2 motor speeds and belt drive with stepless speed adjustment - emergency stop - right- left rotation - automatic feed 0,1 mm/rev - table height adjustment via hand crank - clamping surface at machine base 450 x 400 mm - Coolant device in machine base - illumination - Quick-action drill chuck CAP, 0 to 13 mm Space requirement L x W x H 900 x 500 x 1950 mm weight 320 kg good condition

more

Listing

Lüneburg

6,777 km

Universal milling and drilling machine

Bohner & Koehle MF2-K2926/1

Call

Condition: used, Year of construction: 1971, x-way 1,200 mm y-way 800 mm z-way 665 mm throat depth 1,000 mm Circular movement of clamping table 360 ° Table feeds - longitudinal travel per handwheel revolution 6 mm Table feeds - transverse travel per handwheel revolution 6 mm Table feeds - circular movement per handwheel revolution 2 ° Table feeds - longitudinal feed 20 - 1,600 mm/min Table feeds - cross feed 20 - 1,600 mm/min Table feeds - rapid feed lengthwise 1,600 mm/min Table feeds - rapid feed crosswise 1,600 mm/min Boom - vertical movement of the boom 665 mm Extension arm - adjustment travel per handwheel revolution 0.7 mm Spindle slide - adjustment travel per handwheel revolution 2 mm Spindle slide - swivelling 90 ° on both sides Spindle slide - rapid feed 500 mm/min Milling spindle diameter in front bearing 60 mm Tool holder MK4 Distance spindle head to table surface 0 - 825 mm Largest workpiece diameter (passage) for circular milling 2,800 mm Largest working diameter for circular milling 1,400 mm Connected load 5.5 kW Dimensions L x W x H approx. 3.4 x 3 x 2.7 m Machine weight approx. 4,700 kg Batr7t9mf

more

Listing

Stockstadt

(dealership location)

6,895 km

Radial Drilling Machine

KRAFT (Sieg) ZB 40/50/60/70/80 m. Touchpanel (opt.)

€23,900

Fixed price plus VAT

Call

Condition: new, bore capacity in steel (diameter):50 | 60 | 70 | 80 mm arm length:1400 | 1600 | 2000 | 2550 mm workpiece height max.:1220 | 1600 | 2000 mm Distance between spindle and column, max.:1600 | 2000 | 2500 mm Distance between spindle and column, min.:350 | 400 | 450 mm spindle taper MT:5 | 5 | 6 MK spindle turning speed range:25-2000 | 20-1600 | 16-1250 U/min transmission ratio:16 Stk. feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/min dice table:630x500 | 630x800 | 800x1000 mm power capacity:4 | 5,5 | 7,5 kW Fepmhkprd Weight approx.:3500 | 7000 | 11000 kg Machine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mm cube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stück slots with screws:6 Stück reducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loading warranty:12 months

more

Listing

Deutschland

6,760 km

Upright Drilling Machine

ACIERA 23

Call

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 23 mm throat 460 mm bore stroke 120 mm turning speeds 45-4500 U/min table-size 760 x 400 mm digital readout 2 Achsen / axes x-axis 500 mm y-axis 300 mm z-axis 460 mm vertical feeds: 0 - 800 mm/min quill feed 0,02 - 0,6 mm threading cutting capacity: M18 in Stahl / stee total power requirement 3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,7 x 1,4 x 2,1 m Bim0t83zxfw Coordinate drilling machine, column drilling machine ACIERA 23, very good condition, from training workshop.

more

Listing

Schwabach

6,707 km

Deep hole drilling machine

IXION TL 1001

Call

drilling depth: 1,000 mm, Condition: good (used), Year of construction: 1997, Seller = first owner and has used the machine in his own tool shop ! Bikmnwat98c No contract manufacturing ! A large number of drilling tools are also supplied. . Machine is still at the owner's premises in Bavaria / Franconia and can still be demonstrated there. CNC-control MITSUBISHI M3 1 CNC axis, Z = drilling movement Tool holder SK 40 Coolant system 50 bar , 25 l/min Spindle speeds 100 - 4000 rpm .