Used Heavy Drill Machine for sale (67,555)

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Dsdpsqa Txqofx Am Teuw Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Djdpfxeharwvo Am Tsuw Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2023, operating hours: 811 h, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, Used MW1000 Pile Driving Machine in Good Condition. The MW1000 pile driving machine is a high-performance and versatile unit designed for efficient and precise pile installation in various applications such as solar power plants, highway guardrails, vineyard installations, and construction projects. Working Hours: 811 hours Year of Manufacture: 2023 Optional Equipment: Screw Attachment, DTH and Auger Drilling Attachment, Pile Extractor, GPS/GNSS, Remote Control, and Automatic Leveling System Engine Brand: YANMAR Power: 35 kW / Stage 5 – 42 kW / Stage 3 Rated Speed: 2200 rpm Fuel Tank Capacity: 60 liters DPF Filter: Standard on Stage 5 engines Hammer Power: 1200 Joules Operating Pressure: 120 bar Impact Frequency: 570 – 1180 blows/min Hydraulic System Flow Rate: 50 – 100 L/min Pressure: 180 bar Hydraulic Oil Tank: 150 liters Travel / Mobility Low / High Speed: 2.2 / 4 km/h Climbing Ability (pile driving): 20% Side Slope (curb operation): 10° Track Type: Rubber tracks Dimensions Transport Width: A1 – 2280 mm Transport Height: A2 – 2550 mm Transport Length: A3 – 2950 mm Machine Width: A1 – 2280 mm Machine Height: A4 – 4400 mm Dsdpfx Amoy Efbdo Teuw Machine Length: A5 – 3110 mm Mast Height: A6 – 4500 mm Weight: 4350 kg Movement Capabilities Rotation: None Tilt: 10° Mast Forward Tilt: 12° Mast Backward Tilt: -63°

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains. Dsdpfxjx Tg Eto Am Tjuw

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, Dodpjx Tf R Uefx Am Touw versatile machine designed for efficient and precise pile installation in various solar park, guardrail, vineyard, and construction applications.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Dsdox Tg Dpepfx Am Tsuw

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. Dodsx Tg Nxopfx Am Touw 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM drilling machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm Dedozhnigepfx Am Tjuw W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm MACHINE DETAILS Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection CAD import with intuitive touch operation Detection of holes by color code Automatic wear compensation Blind hole machining with depth control 3-stage discharge control Thread erosion for hardened materials M3 - M16 Generator power booster for large diameters Indexing axes, 1- and 2-axis available Large water tank with 175 l and filter system Drilling depth measurement Automatic electrode control

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual Dedpfx Ash Ek H Som Tjuw MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Duedpfx Amozh U Hls Tow Number of spindles: 35 Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Multi-functional CNC drilling machine is able to drill from 6 sides. Independent top grooving, 5.5kw main spindle of 4-slot tool changing magzine, and 1 drilling block on top, one drilling block and one main spindle on bottom meet different process requests and gives batch-size-one production max flexibility; Software is open port, support most formats in market. Compact design, save space /// TECHINICAL SPECS Total power - 21.07 KW Machine dimensions - 3962× 3010× 2320mm Power supply - 380 V/50 Hz Air supply 0.6-0.7 MPa SYNTEC control system Panel size Length 200-2,800 mm Width 30-1,220 mm Thickness 10-60 mm Maximum travel speed X-axis/U-axis - 135 m/min Y axis - 75 m/min Z axis - 30 m/min V axis (push) - 30 m/min Drilling blocks Top 1; Bottom 1 Number of vertical drills (top) 1 Number of horizontal holes (top) X: 2*2+ Y: 2*2 Number of vertical drills (lower) 9 Maximum drill diameter Φ35 mm Distance between holes 3 Rotation speed 5000 rpm Dsdpeyi Avfofx Am Teuw Shaft diameter Φ10 mm Drill length 7 Main shaft Upper - 1*5.5 kW ER32 ATC4 18000 rpm Lower - 1*3.5 kW er25 18000 rpm Saw blade Power 1.7 kW Dimensions Ф 100* Ф 22* δ 4Center distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW Dedpsyvvptofx Am Tsuw weight of the machine ca. 260 kg

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Djdpfxezim R Eo Am Tsuw Designation: IMI Installation dimensions: approx. 2000 × 1200 × 2300 mm Weight: approx. 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. Dujdpfxsxcwmqs Am Tsw - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 Djdpfx Amoyvvn Nj Touw spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Dsdpfx Aoyvvmxsm Tjuw Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm Dodpjyvvmrsfx Am Tsuw T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm Duedjt H Smyepfx Am Tsw arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m

Condition: excellent (used), bore depth 500 mm Dujdpfxexx A D Te Am Tjw spindle speed: 1

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW Dujdpfxot Hw U Nj Am Tjw weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Description to follow! Duodsw U U Ikjpfx Am Tjw

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm Duodpjwftt Ijfx Am Tjw total power requirement 4,4 kW weight of the machine ca. 1,7 t

Condition: used, Year of construction: 1999, throat 290 mm Duodpfew En D Ujx Am Tew bore stroke 160 mm total power requirement 1,9 kW Description to follow!

Condition: used, Year of construction: 1981, drill diameter 32 mm drilling length 0 mm Universal Drill Bit Grinder Duedpfx Aet Hwn Ajm Tew lots of accessories

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Dujdpfxow D Hi Tj Am Tew