Used Down Stroke Dare for sale (7,568)

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 Fgodpfox D Dzdsx Addsk This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2023, There are 3 Sets of Coating System subjected to this listing; Details; 1- 2023 Wagner liquid coating system consist of; -2 pcs Isolate paint supply set Each consisting of: 1- 1 pc Isolated table approx. dimensions 3200x1000x1900 h. mm. • Standard grounding system • 2 Electric locks, one for paint supply access door and one for the spray booth access door complete with electric wiring • Lamp red / green for electrostatic on / off status 2- 3 pcs Wagner Pneumatic elevator for 25l drum covers complete with: stainless steel cover with inspection hole and suction pipe pneumatic agitator rotation block when in high position 3- 4 pcs Wagner double diaphragm pump, mod. DD10 (4 for paint and 1 for water) pressure ratio 1:1, complete with: pressure regulator and gauge for the motor feeding air fluid filter group suction hose for 25 l drum cover (for paint) suction hose for 25 lt drums (for cleaning water) Fgodpfx Asxcnk Teddek 4- 1 pc flusching pressure tank for CUP BELL -2 pcs Reciprocator mod. VU 1-2700mm stroke • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and • acceleration up to 6m/s • stroke speed variantion along the stroke • Electric Motor protection cover • Sliding base 600mm with electric engine to move automatically back and forth the reciprocator • Isolated mounting brackets • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and 2- 2023 Wagner Projekt Powder Supercube System -Booth Supercube with 2 slot eachside In sandwich PVC- Length 2.500 -Powder Suction and Seperation Cyclone and Filter 17.000 mc/h (16.000 + 1.000) -Powder Centre SUPERCUBE EVO with IP Pump with Container Ultra siewe included + extra container without siewe -Application Technology PROFITech With N*12 PEA-C4 XL automatic guns N*16 automatic guns PEA-C4 XL (8 on reciprocator1 + 8 on reciprocator2) Movement N*2 moving reciprocators with motorised moving bases. -N*2 electronic reciprocators with fences -N*2 electronic fast mobile bases for scanning pieces -N*1 Vertical and Horizontal Scanner reading system of pieces N*1 encoder for connecting conveyor to Touch panel N*1 Software 4.0 Data production with data management Powder Consumption Colour Change Time Stop Production counter -Two external platforms (2 x manuel PEMX1 guns) For more details please get in contact ...

Condition: used, Year of construction: 2000, Engel ES 330/110HL-V (2000) Fodpjxqd D Esfx Addsgk Clamping force: 110 t Screw diameter : 35 mm Distance between tie bars : 730 x 420 mm Shot weight : 75 gc Size of mould platen: approx. 730 × 600 mm (H × V) Minimum mould height: 250 mm Maximum daylight opening: 750 mm Opening stroke: 500 mm Machine weight: 5900 kg

Year of construction: 2010, condition: ready for operation (used), General Data Measurements width 4000 mm Measurements depth 4250 mm Fgsdex D Rr Aopfx Addok Measurements height 2330 mm Machine weight 11000 kg Main Drive Spindle motor power 11 kW Stroke 40 mm This ERMAK EPP 1270 x 30 was manufactured in 2010. It features a punching force of 30 tons, a capacity of 6 mm, and can deliver up to 700 strokes per minute. The machine has a motor power of 11 kW and an oil capacity of 300 liters. Dimensions are 4000 mm in width, 4250 mm in length, and 2330 mm in height. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Clamping force: 125 t Type: Horizontal Drive: Hydraulic Clamping unit Fedpfx Asvytz Njddsgk Clamping force: 1250 kN Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 150 mm Max. plate distance: 850 mm Minimum mold height: 250 mm Mold plates (HxV): 740 x 840 mm Max. mold size (HxV): 740 x 700 mm Bar clearance: 470 mm Injection unit (45 mm screw) Screw diameter: 45 mm L/D ratio: 20 Metering volume: 290 cm³ Screw speed: 290 min⁻¹ Plasticizing capacity: 35 g/s Injection flow rate: 180 cm³/s Injection volume: 251 cm³ Injection speed (specific): 134 cm³/s Injection pressure: 1520 bar Injection pressure (increased): 2040 bar Specific injection pressure: 1230 bar Nozzle stroke: 350 mm Nozzle force: 67 kN Heating capacity: 13.3 kW Number of heating zones: 5 Drive Pump drive power: 22 kW Oil volume - main tank: 310 l Oil volume - additional tank: 110 l

Year of construction: 2004, operating hours: 64,285 h, condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 Fjdsx D Srqopfx Addogk EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2017, Equipment: documentation/manual, ENGEL Victory 750/220 SPEX – Technical data Machine designation: VICTORY 750/220 SPEX Plasticizing 1: 1. Screw diameter (standard): 45 mm 2. Available screw diameters: 40 / 45 / 50 / 55 mm Fgodpfx Adox Ely Tedek 3. Screw stroke: 200 mm 4. Max. injection capacity: 318 cm3 5. Screw speed: 230 min-1 6. Recovery rate (3-zone screw): 24.2 g/s 7. Recovery rate (barrier screw): 30.1 g/s Injection 1: 1. Injection rate: 229.0 cm3/sec 2. Injection pressure (regenerative): 1760 bar 3. Injection pressure (max): 2360 bar Nozzle 1: 1. Nozzle stroke: 350 mm 2. Nozzle contact pressure: 67.2 kN Plasticizing Unit 1: 1. L/D ratio: 20.0 2. Heating zones incl. nozzle: 5 3. Heating wattage: 13.4 kWel Clamping unit: 1. Clamping force: 2200 kN 2. Opening stroke + cylinder tolerance: 759 mm 3. Minimum mold height: 300 mm 4. Maximum distance between platen: 1050 mm 5. Platen size horizontal × vertical: 880 × 830 mm 6. Drop out chute width: 650 mm 7. Maximum mould weight moving platen: 1500 kg 8. Maximum mould weight stationary platen: 1500 kg 9. Maximum mould weight total: 3000 kg 10. Dry cycle stroke: 250 mm 11. Dry cycle time: 2.00 s Ejector: 1. Ejector stroke: 180 mm 2. Ejector force: 80.0 kN Drive unit: 1. Oil reservoir capacity – injection unit: 330 l 2. Oil reservoir capacity – clamping unit: 210 l Oil filter / Oil cooler: 1. Cooling power standard (25 °C water inlet): 12.0 kW 2. Water consumption oil cooler 25 °C: 1.00 m3/h 3. Water consumption oil cooler 32 °C: 2.10 m3/h Machine basics: 1. Weight total (without oil): 12.2 t 2. Total power: 72.0 kW 1. Hydraulic drive variant HV1 (standard) 2. Microcomputer CC300 3. 6-fold flow regulator , 0–10 l/min

Condition: ready for operation (used), Year of construction: 2016, General Data Fgjdox D H Dnspfx Addek Machine weight 4000 kg Main Drive Pressing force 400 kN Stroke 200 mm This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Bending

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Fgedpfx Adou Eki Ssdek Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 120 mm Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Application Types Fodpfsx D Rcnsx Addegk Injection Moulding

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) Fgjdpswtgltofx Addsk S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Main Drive Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Fedpex D S H Usfx Addjgk Application Types Bending

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4500 kg Main Drive Pressing force 500kN Stroke 200mm Additional Equipment Robot Motoman This AMADA HFBO 50 20 press brake was manufactured in 1996. It features a maximum pressing force of 500kN and a stroke up to 200mm. Operating on 400V 50Hz with a power requirement of 6kW, it weighs 4500kg. Consider the opportunity to buy this AMADA HFBO 50 20 press brake. Contact us for more information. Fgodpfx Aex D Nnveddek Application Types Bending

Year of construction: 2022, operating hours: 2,047 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL with ShopTurn Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 25.5 kW Fsdpfxjx E D Uvj Addogk This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2021, condition: ready for operation (used), General Data Measurements height 2850 mm Dimensions Machine Length 3950 mm Control Unit Fgedpfx Adex D H Exedjk Brand DELEM Model DA-58 Main Drive Bending length 3100 mm Pressing force 220 Kn Number of axis 2 This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine. Application Types Bending

Year of construction: 2007, condition: ready for operation (used), This ESSETRE TECHNO was manufactured in 2007. A CNC Wood Machining Centre featuring a Z-axis stroke of 1320 mm and a maximum electrospindle power of 12 kW at 7000 rpm. It supports tool sizes from 3 to 30 mm with a manual clamping system. Ideal for diverse woodworking applications. Contact us for more information about this machine. Fsdsx D Nvtepfx Addjgk Application Types CNC Wood Machining

Year of construction: 2019, operating hours: 351 h, condition: ready for operation (used), General Data Machine weight 16000 kg Fgsdpfxsx D S D Ts Addjk This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, it's ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information. Application Types Bending

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2550 mm Measurements depth 5450 mm Measurements height 3150 mm Machine weight 24500 kg Main Drive Pressing force 400 t Stroke 300 mm Fgsdpfsx D Rmaex Addsk This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Application Types Bending

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2180 mm Measurements height 3350 mm Machine weight 9300 kg Additional Equipment Lower Hydraulics Pressure Force: 350 kN / Lower Hydraulics Travel: 200 mm / Lower Hydraulics Table Size: 400x400 mm / Lower Hydraulics Travel Speed: 52 mm/min This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine. Application Types Punching Fjdpfx Ajx D S Dysddjgk

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Fgodjx D Sr Dopfx Addok Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Year of construction: 2002, condition: ready for operation (used), Main Drive Spindle motor power 11 kW Stroke 110 mm This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine. Application Types Stamping Fgedpsx D H N Rsfx Addjk

Year of construction: 2018, condition: ready for operation (used), General Data Measurements height 2650 mm Dimensions Machine Length 3400 mm Main Drive Pressing force 784.53 Kn Number of axis 4 Fgjdox D D Rrspfx Addjk Movement X-Axis Movement 500 mm This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning Fgsdpfxjx D Izbs Addjk

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, General Data Measurements width 2210 mm Measurements depth 5000 mm Fgsdpfsx D Ilyox Addek Measurements height 3100 mm Machine weight 18000 kg Control Unit Brand TRUMPF Main Drive Pressing force 1700 kN Bending length 4080 mm Stroke 365 mm Number of axis 8 This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Application Types Bending

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 5650 kg Measurements height 2370 mm Measurements depth 1644 mm Dimensions Machine Length 2587 mm Fodpfox Enkzox Addjgk Movement X-Axis Movement 600 mm Y-Axis Movement 200 mm This 6-axis TRUMPF TruBend 3066 B26 press brake was manufactured in 2018. It features a press force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis backgauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 3066 B26 machine we have for sale. Contact us for more information. Application Types Bending