Used Dragone Vl 200 for sale (16,411)

Condition: used, 200 running meters Pallet Rack Schäfer Palflex Used equipment in good condition, see pictures. Height: 6.5 m Depth: 110 cm, galvanized Bay load: 24,000 kg Beam length: 4.1 m, orange Load capacity per beam/level: 3,000 kg Negotiation price: €17,900 net ex stock The offer includes: + 49 pre-assembled frames, depth 110 cm, height 6.5 m + 288 beams, length 4.1 m, load capacity per level 3,000 kg + 576 safety locking pins + 196 concrete anchors Used corner guards available immediately at an extra charge of €15 each net! Load capacity plates, documentation etc. are of course included. Additional accessories are available in the accessories catalog. Ncedpfovfnnzox Adpeu Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information upon request. Over 5,000 running meters of pallet racks from various manufacturers always in stock. (Specifications, information and pricing subject to change and prior sale! Please see our Terms & Conditions. All prices ex VAT ex stock.)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Ncsdpjwc Rk Esfx Adpsu TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Nedpfeh R Tvtjx Adpscu

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Njdpfex Dm D Ijx Adpjcu

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data Njdoudvt Rjpfx Adpjcu + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Ncedpfogkgwfex Adpsu Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: ready for operation (used), functionality: fully functional, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Turning diameter max.: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Torque max.: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Torque max.: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Angular positioning of the sub spindle Synchronization of main and sub spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Nsdozgufrepfx Adpjcu Interface for IC memory card

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. Ncjdpfx Aoq Nia Ijdpou 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: used, Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Ncsdpfeh Tnaqsx Adpsu Delivery time: 30 working days after advanced payment

Condition: new, Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Nedpfohd U Tasx Adpocu Delivery time: after advanced payment, one working day

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Nedpjtq T Tkefx Adpecu Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Condition: new, Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Nodpfx Aoum Ungedpjcu Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

Condition: used, Meat grinding machine Ncjdpoxrhfpefx Adpou Manufacturer: Sind Voltage: 380V / 50Hz

Condition: like new (used), VF 200 vacuum filler All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Njdpfxexulh He Adpjcu

Condition: used, Cutter Ncsdjttwbgepfx Adpou Manufacturer: Alpina Made of stainless steel Volume: 200 liters

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg Nsdpfxjul Tm Eo Adpjcu

Condition: used, Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Ncodpfx Adjyg Axujpeu Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

Condition: used, The Schwan Optimal 300+200 is a double industrial steam kettle designed for cooking, processing and thermal treatment of large food batches. The unit consists of two independent kettles with capacities of 300 and 200 litres, allowing simultaneous processing of different products while maximizing production flexibility. Manufactured from stainless steel, the kettle is suitable for food processing plants, central kitchens, meat processing facilities and professional catering operations. The dual-kettle design enables efficient workflow management and optimal utilization of production capacity. Technical Specifications Manufacturer: Schwan Apparatebau Model: Optimal 300+200-6/P5 Type: Double Industrial Steam Kettle Kettle Capacity: 300 L + 200 L Total Capacity: 500 L Material: Stainless Steel Voltage: 400 V Ncodjzgqz Nspfx Adpju Frequency: 50 Hz Power: 31 kW

Condition: used, Centrifugal Pump, Pump, KSB Etabloc-GN 50-200/1852, Used machine Manufacturer: KSB Type: KSB Etabloc-GN 50-200/1852 Year: 2003 Overall dimensions: Width: 810 mm Depth: 350 mm Height: 400 mm Weight: 130 kg Electrical data: 400 V; 18.5 kW; 32.5 A Flow rate: 72 m³/h Ncsdpfx Adey Nnnbjpsu Head: 51 meters

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Width: 6200 mm Depth: 1300 mm Height: 1610 mm Ncedoxtwqdepfx Adpeu Belt Specifications: 480 x 130 x 60 x 310 mm Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm

Condition: ready for operation (used), Chip Conveyor, Knoll 320 s-1/200, Used Machine Manufacturer: Knoll Type: 320 s-1/200 Nsdjwmmltjpfx Adpocu Year: 2015 Overall dimensions: 6200 x 1310 x 1610 mm Belt dimensions: 500 x 1400 x 4700 mm Lamella spacing: 315 mm

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 200 Optimizer Ncjdpfx Adozf I Tgepsu Nominal cross-section: min. 30 x 12 mm Maximum trimming range: 250 x 12 mm or 160 x 80 mm Feed speed: 180 – 240 m/min Automatic sorting with 4 ejectors Waste strip collection system

Condition: excellent (used), Year of construction: 2004, The IRB 6650 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Ncodpfeyrix Eox Adpou Payload: 200 kg Arm Reach: 2750 mm Model Type: IRB6650 Model Year: 2004 Condition: Used Included: Manipulator + Control Cabin + All Wire Sets + Teachpendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: not inspected (used), Year of construction: 2023, operating hours: 1,400 h, machine/vehicle number: 180073, grinding depth: 100 mm, grinding length: 100 mm, overall weight: 5,000 kg, grinding diameter: 100 mm, workpiece diameter (max.): 215 mm, feed length X-axis: 400 mm, feed length Z-axis: 200 mm, j.stumpf [at] ivg.auction Control system, monitoring, and key data o Control system: SIEMENS, type SINUMERIK 840 D SL o Year of manufacture: 2023 o Recorded operating hours: 1,376 Working area o Swinging diameter above the W-axis: 215 mm o Grindable bore length: 100 mm o Grindable bore diameter max.: 100 mm o Grindable external length: 100 mm o Length of the part with clamping devices: 200 mm Travel distances o X-axis: 400 mm o Z-axis: 200 mm Axis speeds o X-axis: 1 - 25,000 mm/min o Z-axis: 1 - 25,000 mm/min Spindle data o C0-axis, workpiece spindle 400 with direct drive o Motor spindle, infinitely adjustable: 0 - 2,000 rpm o Motor power: 5 kW o Workpiece weight incl. clamping devices max.: 80 kg o Internal taper: 5 MK Njdpfx Adezgcd Nopjcu o External centering: 80 g6 mm o Spindle bore: 30 mm o Water cooling: available Operating data o Machine weight: 4,500 kg o Machine connection values o 3 x AC / 400 V / 50 Hz o Rated power: approx. 34 kVA o Rated current: approx. 49 A Peripherals • Air filter unit, IFS, type IFMC 1800, year of manufacture 2021, serial no. 565760-02 • Cooling unit, HYFRA, type E-CHILLY 5-400V-S, year of manufacture 2022, serial no. 10129303PC01240522, cooling capacity approx. 5,480 m³ / 32° Celsius • Hydraulic unit, LEHMANN UMT, type KSS0119, year of manufacture 2022, own weight approx. 610 kg, consisting of: • Cooling unit, HYFRA, type TRK-CHILLY-45-EF-S, year of manufacture 2022, serial no. 10132616PC01290722 • Chip conveyor, LEHMANN UMT, type FB100, year of manufacture 2022, serial no. AUF007093-1, own weight approx. 80 kg • Magnet unit, LEHMANN UMT, type VMA 100S GM WA, year of manufacture 2022, serial no. AUF007093-1, own weight approx. 60 kg The machine was loaded manually. In automatic loading operation, a collision occurred.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm Ncjdjy Tw Tzopfx Adpou - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)