Used Dressing for sale (420)

Year of construction: 2019, condition: good (used), functionality: fully functional, Venom Standard V8 Central, manual clamping device for bandsaw blades Grinding wheel is directly driven, reducing vibrations and enabling very high material removal rates Large-diameter grinding wheel V8 = 300 mm for increased profile durability of the grinding wheel Electric feed adjustment for tooth face and tooth back via touch panel Integrated grinding wheel dressing device Frequency inverter for stepless feed speed adjustment Nodpfx Asxqrtbsanjdf Available for gang or circular saw blades Frequency inverter for stepless grinding wheel speed adjustment Swivel arm Technical details: Tooth profiles: PCB Blade width Bandsaws: 32 mm to 380 mm Blade thickness: 0.4 – 6.0 mm Adjustable pitch: 14 – 60 mm Adjustable tooth height: 5 – 30 mm Rake angle: 0° – 40° Working speed: 0 – 30 teeth/min Grinding wheel diameter: V8 = 300 mm Grinding wheel thickness: 6 – 20 mm Grinding wheel drive: 3.2-4.0 kW electric motor Water pump: 120–350 l/min Grinding wheel is directly driven, reducing vibration and allowing for very substantial material removal Grinding wheel with large diameter (300 mm) for enhanced grinding wheel profile stability All mechanical guides are located at the rear of the machine to protect them from moisture Electric feed adjustment for tooth face and tooth back via touch panel Built-in grinding wheel dressing device

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 32300-16, grinding wheel diameter: 400 mm, grinding wheel width: 104 mm, overall weight: 1,500 kg, TECHNICAL DETAILS Grinding wheel diameter: 400 mm Max. grinding wheel width: 104 mm Grinding worm diameter: 270 - 400 mm Max. grinding worm width: 62/84/104 mm Grinding worm speeds during profiling: 18/35/70 rpm Max. module: 7 Min. module: 0.5 Pressure angle: 10 - 30 degrees Longitudinal travel of dressing unit: 156 mm MACHINE DETAILS Ndedpfxoxvr A Tj Aanjf Electrical data Total connected load: 3 kW Electrical specification - voltage/frequency: 380 V / 50 Hz Dimensions & Weight Space requirement approx.: 1.5 x 1.4 x 1.3 m Machine weight approx.: 1,500 kg

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB2600ID-15/1.85 IRC5 (RW6), load capacity: 15 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, This robot will be delivered as an IRS Robotics® Refurbished industrial robot. Includes our warranty and a detailed 77-Point Protocol evaluation, carried out by our in-house robotics engineers. Nodpewr Ei Ujfx Aanedf Brand: ABB Type: IRB2600ID-15/1.85 Controller: IRC5 (RW6) Payload: 15 kg Reach: 3.1 m Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our dedicated test benches, new oil/grease, new batteries, fully cleaned, painted in your required RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About us: Our daily reliable business is the delivery of refurbished A-brand robots: ABB – KUKA – YASKAWA. Est. 2002. We ship worldwide.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Ndjdexb Ufuspfx Aanef Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Njdpfsid Iymsx Aansdf Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm Ndodot N Ivcspfx Aanef • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m Nsdsuy Ifgspfx Aanodf The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Condition: good (used), Year of construction: 1977, functionality: fully functional, Deckel SOE tool grinder with accessories Technical data: >> Machine no. SOE 77-3997 Year built 1977 >> Motor speed 2800 rpm >> Grinding spindle speed 4500 rpm >> Motor power: 0.55 kW / 380 Volt >> Weight approx. 200 KG Ndedpfx Aaswrm Nvsnsf Accessories and equipment: >> Collets >> Grinding wheels >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction About the machine: Offered is a Deckel SOE tool grinder with accessories. Mechanically and electrically tested. A beautiful and fully functional machine. Take the opportunity to view and try out this machine under power on site.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB1660ID-6/1.55 IRC5 (RW6), load capacity: 6 kg, arm reach: 1,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB1660ID-6/1.55 Typical welding robot, but can also be used for other applications! Controller: IRC5 Payload: 6 kg Ndodpfx Ajwvuh Ueansf Reach: 1.55 m Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: used, Year of construction: 2000, grinding diameter: 340 mm, workpiece weight between centers: 80 g, controller manufacturer: GE FANUC, controller model: 16IT, CONTROLS .. CNC controls GE FANUC 16IT WORKING RANGE CYLINDRICAL GRINDING .. swing diameter (max): 340 mm .. workpiece weight between centers (max): 80 kg WORKING RANGE EXTERNAL GRINDING .. grinding diameter (max): 340 mm .. grinding length: 650 mm WORKPIECE SPINDLESTOCK .. c-axis: yes TAILSTOCK .. distance betw. centers (max): 650 mm SPINDLESTOCK GRINDING SPINDLE .. X-axis travel: 370 mm .. Z-axis travel: 800 mm .. tilting range (B-direction) min: -30 ° .. rotating range B-axis up to: 225 ° .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 1500 /min GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 500 mm .. borehole: diameter: 203 mm .. width: 63 mm SPINDLESTOCK INTERNAL GRINDING .. spindle revolutions (max): 30000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 20 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5000 mm .. total weight approx.: 9500 kg ATTACHMENTS (GRINDING) .. internal grinding spindle: yes Nedpoxun E Usfx Aanodf Equipment: 2 external grinding spindles 1 internal grinding spindle Fischer MFV 1230, 30000 1/min - C-axis for curve or polygon grinding (incl. HSM option) - Dressers: 1x fixed diamond on the tool holder, 1x dressing spindle on the tool holder, 1 swivel dresser - Studer Quickset, - Movomatic ES400 connection for measuring unit, (without measuring probe) - 1 tailstock, - 1 swivel dresser, - The machine can be converted to a jaw chuck - No water treatment, as it is installed on a central system

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min total power requirement 146 kW work piece spindle speed 700 U/min weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears Ndsdsvxww Sjpfx Aanof No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) Ndedpfxovpalao Aansf ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Year of construction: 2024, operating hours: 37 h, functionality: fully functional, machine/vehicle number: 2411975-2236754, overall weight: 655 kg, load capacity: 40 kg, arm reach: 2,503 mm, pivoting range: 340 °, controller manufacturer: C5G, controller model: C5G Plus, teach pendant manufacturer: TP5, teach pendant model: C5G Control Unit, control cabinet width: 800 mm, control cabinet height: 1,100 mm, input voltage: 480 V, input current: 12 A, type of input current: DC, repeat accuracy: 0.06 mm, Equipment: documentation/manual, 6-axis industrial robot, 40 kg wrist payload, 2.503 m reach, ±0.06 mm repeatability. Supplied with Comau C5G Plus (Rel.3.0) control unit and TP5 teach pendant. Foundry protection (IP65/IP67 options) and hollow wrist/forearm dressing. Mains 400–480 VAC, 50/60 Hz. Nsdpfjxtm H Uex Aansdf

Condition: used, Year of construction: 1993, table-size 1500 x 550 mm Ndjdpfexukn Eex Aanef grinding range 1250 x 500 mm workpiece height 500 mm grinding width 550 mm grinding length 1250 mm voltage 400 V weight of the machine ca. 10 t Machine has cooling arrangement, dressing arrangement and auto. vert. feed. We supply a magnetic plate along with the machine 1500 x 500 mm and a rotary table.

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. Ndodpfx Aaogb Ec Henef The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Nedjxzk Niopfx Aanodf Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2360 mm Dressing table adjustment: lever Gap removal indicator: scale Indication hollow - pointed joint: - Dressing fence angle adjustable: yes Motor power: 4,4 kW Nodpfx Aegqwx Aeanjdf machine length: 2360 mm Machine width: 860mm Weight: 475 kg

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg Ndsdpfx Ajvb Dl Uoansf work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: used, Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 1,50,000 g, workpiece diameter between centers: 300 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 5,600 kg, Equipment: rotational speed infinitely variable, The machine is fully operational and can be inspected under power. OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Grinding wheel: diameter x width x bore: 455 x 75 x 127 mm Wheel speed: stepless Peripheral speed: 45 m/sec Grinding spindle head (X-axis): max. travel 300 mm Swivel angle of workpiece table: not swiveling Workpiece table (Z-axis): travel: 1,150 mm Swivel angle: 0 – 10° Workpiece spindle head: fixed/rotating type Spindle mount: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle of grinding spindle: not swiveling Tailstock type with manual fine taper adjustment Quill stroke: 30 mm Mount: MT 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x width x height approx. 4,243 x 2,490 x 1,860 mm Machine weight approx. 5,600 kg Standard equipment: - Complete FANUC keyboard with radius compensation for creation of ISO programs - Shop floor programming graphical software for grinding and dressing cycles with teach-in function - GAP eliminator - Shoulder positioning - Lamp - Documentation - Leveling screws and mounting plates Accessories: - Marposs measuring control Ø 8 – 92 mm - Various flanges Nsdpfjxy Hvpox Aanedf - Various grinding wheels - Band filter All information subject to change; intermediate sale reserved. Prices: plus VAT Terms of payment: net, payment before loading

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Nodoxwp A Hopfx Aanjdf Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Year of construction: 2019, condition: excellent (used), Machine capacity CAPACITIES · Height of centre points Max. diameter for cylindrical grinding Distance between centres Max. length for cylindrical grinding Max. workpiece weight without steadies | Metric | |---|---| | 335 mm | | 450 mm | | 2150 mm | | 2100 mm | | 260 kg | TECHNICAL DATA Metric GRINDING SPINDLE UNIT Cylindrical grinding spindle 1: Electric spindle Max. grinding wheel dimensions: 610 × 50 × 203.5 mm Peripheral speed of grinding wheel: 30 - 125 m/sec Max. grinding spindle speed: 4420 min⁻¹ Cylindrical grinding spindle 2: Electric spindle Max. grinding wheel dimensions: 350 × 20 × 127 mm Peripheral speed of grinding wheel: 70 - 110 m/sec Max. grinding spindle speed: 6000 min⁻¹ X & Z AXES X & Z axes movement: ball screw Ndedpoxr I Anefx Aanjf X-axis traverse path: 460 mm X-axis speed range: 0-5000 mm/min X-axis resolution: 0.0001 mm Z-axis traverse path: 2590 mm Z-axis speed range: 0-5000 mm/min Z-axis resolution: 0.0001 mm B AXIS Swivel angle: 0 - 180° Type: automatic via torque motor C AXIS Workpiece speed range: 0-750 min⁻¹ Coupling type: headstock and tailstock TM 5 Tailstock sleeve diameter: 80 mm Tailstock sleeve stroke: 80 mm Tailstock adjustment accuracy: +/- 200 μm EQUIPMENT DETAILS GRINDING WHEEL DRESSING DEVICE Type: dressing station with fixed points for cylindrical grinding + electric spindle for diamond dressing roll COOLANT SYSTEM Type: magnetic separator and filter paper Flow rate / output: 50-200 l/min Tank capacity: 2000 litres Pump pressure: 5-20 bar OIL MIST EXTRACTION UNIT Volume flow / exhaust quantity: 2000 m³/h Max. power: 2.3 kW CNC CONTROL Brand: Siemens Model: Sinumerik 840 SL Unit system: metric MEASURING SYSTEMS FOR X & Z AXES Type: linear encoder

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm Nodpfx Ajvbgr Rsanjdf workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW Ndsdjwc A Snspfx Aanof swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Njdpfjvc Apbsx Aanedf Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 500 mm workpiece height: 500 mm table surface area: 1000 x 450 mm magnetic plate size: 1005 x 500 x 84 mm table speed: k.A. m/min table adjustment: längs: 1100 mm table adjustment: quer: 500 mm grinding spindle speed: 1420 - 2840 U/min grinding head vertical adjustable: 700 mm dimensions of grinding wheel: Ø 280 x 50 mm weight of the machine ca.: 2,7 t dimension machine xH: 3,1 x 2,0 x 2,4 m dimension coolant device LxWxH: 3,0 x 1,1 x 0,85 m dimensions of hydaulic: 750 x 600 x 850 mm dimension control panel: 0,65 x 0,85 x 1,3 m Equipment: Dressing device Holder for dial gauge Coolant filter system Ndjdevc Aw Eepfx Aanof Hydraulic unit Manual control unit *