Used Drill Bit Sharpening Jig for sale (6,015)

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Crjdpfsw Hanhox Af Aed Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22 Cedpfx Afsyqxxre Asrd

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Crjdpfxsv If T Tj Af Aod Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base - Coolant system with tank and pump Crjdpfx Afjzg Hfwe Aod - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Csdpfx Aoyyxkhef Asrd

Condition: used, functionality: fully functional, Comec FMC 900 Drilling Machine Automatic loading from a magazine Number of spindles: 4 Main motor power: 4 kW Maximum element length: 900 mm Maximum element width: 100 mm Maximum drilling distance: 800 mm Application: Suitable for large-scale production of chairs, beds, cots, and components for other furniture. Codpfxozga Eqo Af Aerd

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Credjyhbhwjpfx Af Aod

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm Crjdpfxjzip I Ho Af Asd throat 345 mm bore stroke 220 mm tool adaptor MK 4 machine weight ab. 400 kg

Condition: new, 40 mm Cedpfxoyvvq Ds Af Aerd M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min Crjdpfx Aoxwzg Rjf Aod ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions. Crjdpfxeyl Rm Ro Af Aod

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L Cedov T Rkhspfx Af Aord • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM Cedpfsy Ivbajx Af Ajrd WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition Credpjzinz Sjfx Af Asd

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm Crjdpjzinzxsfx Af Aed - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Year of construction: 1999, 50MM GRINDING ARBOR 300 MM MAX. GRINDING LENGTH 330 MM MAX. TOOL DIAMETER GRINDING MOTOR 1,1 KW FEEDMOTOR 0,045 KW COOLING PUMP 0,08 KW DEVIDING DISK FOR AUTOMATIC HEAD ROTATION Crodpfx Aozfy Sbof Ajd DIMENSIONS ARPR. 1,40 X 0.9 X 1,40 M WEIGHT APPR. 375 KG

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Crodpoziny Iefx Af Aod Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: good (used), Code: 0431 Credpfxezipq Io Af Aed Brand: GRIGGIO Model: GF 27 - CE Standard Multiple boring machine with 27 spindles for furniture, custom-made furniture, kitchens, joinery, panels, bathroom furniture and various – CE Standard Technical specifications: N° 27 quick-change spindles Centre-to-centre distance between each spindle 32 mm Total centre-to-centre distance between the first and last spindle 832 mm Max drilling depth 85 mm Table dimensions 1050 x 380 mm Motor 2 Hp N°2 pneumatic workpiece clamps Squares on the worktable Drill bit holder Pneumatic head tilting from 0 to 90°, allowing drilling in any position Extension rods for stop holders Quick Dept Overall dimensions mm 1200 x 780 x 1300 h Weight kg 360

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm Cedoyv N Dqepfx Af Ajrd throat 232 mm bore stroke 150 mm Spindle Speed 115 - 2470 U/min. tool adaptor MK 3 weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 Cjdpfezizqgex Af Aerd - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Codpfxjudpc So Af Aord

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, Crjdpfx Aoy Nm A Rof Asd • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Csdsudl Ikopfx Af Ajrd Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: good (used), Code: 0311 Brand: CIT MECCANICA Crsdpfoynkt Asx Af Asd Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Weight 115 kg

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Credjzhualepfx Af Asd Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck