Used Drill Chuck for sale (8,411)

Condition: good (used), Work table 54 cm x 135 cm Blodpow N N D Ajfx Anyep Shipping dimensions: Width: 135 cm Length: 160 cm Height: 230 cm

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Bodpswz Rifsfx Anyslp Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive -Drill head: 18 spindles -Drill bit spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Bjdpfovmw H Asx Anyslp Price: per piece -Overall dimensions: 800/200/H575 mm -Weight: 67 kg/unit

Condition: excellent (used), Four-jaw lathe chuck Bljdpfx Aetuvnyonyjp (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Chuck height 110 mm

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Diameter 250 mm Bledpfx Aovx Acysnyep Through hole 68 mm Weight 20 kg

Condition: excellent (used), 1. Permanent-magnet chuck, D = 315 mm, with mounting flange according to DIN 55027, size 6. Blsdpfed Eaaujx Anyop

Condition: used, Two Forkardt faceplates Diameter 200mm 2 BHE 200 Bedpfx Aocurfysnyolp Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Bledpfed Th I Tox Anyjp Year of manufacture: estimated

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Bedofimg Hspfx Anyelp Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Manufacturer: Röhm Diameter: 315 mm Bolt circle: 120 mm Bsdpfx Asfklf Usnyslp Individually adjustable jaws Centering bore: 120 mm Pitch: 625/4 threads per inch

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Bsdpofrbtdsfx Anyelp Misc accessories MARCELS MASCHINEN CH

Condition: used, Three-jaw chuck (223/5) Diameter 190 mm Bsdpfsddym Rex Anyelp Height 130 mm

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm Blodpfozk Nuisx Anyop - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH) Bledozldqujpfx Anysp

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock. Blodpfx Anjzgvmqsyjp

Condition: used, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308 h, diesel engine operating hours: 8,002 h, 5x drilling rods, drilling head, dust collector, immediately ready for use, in good condition, German machine. Upon request, we will provide a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = Further information = Year of manufacture: 2011 Intended use: Construction Blodpfx Anjzm Eq Ejyep Please contact Tobias Ebert for further information.

Condition: used, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Year of manufacture: 1987 Colour: Green Empty weight: 700 kg - Year: 1987 - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive Blodozkq Auspfx Anyjp - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5650 operating hours. We specialize in importing and selling these Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. Bsdpfx Aezumt Ronyolp Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid pump/mixer from 2021, which is a great match for this model and provides a practical set for small and medium-sized drilling projects. Ditch Witch FT5 – key data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Option to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid pump. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: Bsdpfx Aezrybpenyelp - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Bodpezrytlefx Anyjlp Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz

Condition: used, 1 kW // 2,700 rpm Foot-operated Technical data: Bjdsztvx Hepfx Anyjlp - Engine: 1

Condition: good (used), bore capacity in steel (diameter) 28 mm arm length 700 mm workpiece height max. 1300 mm tool taper MK3 feeds 0,1-0,3 mm/U Bedpfx Anszfqmcsyjlp spindle turning speed range 100-1.220 U/min total power requirement 1,4 kW weight of the machine ca. 1,3 t dimensions of the machine ca. LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Coolant system. Blodsy Av Ebopfx Anyop Table dimensions: 2080x390 mm Minimum distance from drill chuck to table: 300 mm Maximum distance from drill chuck to table: 700 mm Drill with manual elevation. Drill elevation travel: 400 mm

Condition: excellent (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment Blodpfjyxcu Isx Anyop vice available at extra cost

Condition: excellent (used), two speed with switch Blsdoyxcxaepfx Anyep belt gear motor power 0,8kW clamp connection 380V