Used New Bench Drill for sale (26,201)

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Nsdpfx Aszmuntokxslh Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: good (used), Work table 54 cm x 135 cm Shipping dimensions: Nlsdpfx Aow N N D Aokxoh Width: 135 cm Length: 160 cm Height: 230 cm

Condition: used, functionality: fully functional, Bench drill press Manufacturer: IXION, Type: BT 13 Technical specifications: Manufacturer: IXION Type: BT 13 Year of manufacture: Speed: 480 – 850 – 1400 – 2300 - 4000 rpm Drilling capacity: max. 13 mm in steel Table size (lower): 230 x 170 mm Table can be swivelled: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Overhang: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m Nedpfxoz R Twuj Akxelh All specifications are subject to change without notice. A live demonstration is possible at any time in our showroom.

Condition: ready for operation (used), H. Hartkämper Coordinate Drilling Machine -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel in X: approx. 350–450 mm -Travel in Y: approx. 180–250 mm -Base: integrated steel frame with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg Nledpfx Aeztc A Eokxoh Errors and omissions excepted.

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable Nlodpsu Id Dzefx Akxoh *

Condition: good (used), Storage location: 3132 Manufacturer: WMW Machine number: 1984 Type / Model: BT 2 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,400 / 2,800 rpm Stroke: 100 mm Overhang: 210 mm Table: 340 x 470 mm Head adjustment: 120 mm Total power consumption: 1.1 kW Nljdpozx Rtpjfx Akxoh Accessories / Equipment: Drill chuck Condition: very good Weight: 165 kg Dimensions: 480 x 550 x 1,150 mm

Condition: excellent (used), IM Very good condition. Nledpfew N Nzhsx Akxsh

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5122, Offer 26250 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling capacity in steel ST 60: 40 mm Long spindle, MK 3 Drilling spindle speeds, continuously variable: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Nsdpsz I Sd Sefx Akxjlh Emergency stop button Space requirement: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand

Condition: good (used), Manufacturer: WMW Type/Model: BT 10 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,000 / 2,000 rpm Table: 600 x 400 mm Overhang: 200 mm Stroke: 100 mm Head height adjustment: Motor speed: 1,400 / 2,780 rpm Power rating: 0.8/1.0 kW Accessories/Equipment: Condition: good Weight: 135 kg Nledpfxoz Tc R Ij Akxeh Dimensions with base: 470 x 600 x 1,800 mm

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Njdpfxoz Smpmj Akxjlh Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Nedpfx Akjzrytloxslh Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz

Condition: good (used), Year of construction: 1974, machine/vehicle number: 571, Offer 25456 Technical Data: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - 8 spindle speeds: 100 – 1120 rpm - Table area: 400 x 400 mm - Drilling unit height adjustable via handwheel - Minimum / maximum distance table / drill-milling spindle: 300 / 600 mm - Drilling spindle stroke: 120 mm - Drilling spindle outreach: 260 mm Nlsdpsyfn Npjfx Akxsh - Coolant system - Machine base cabinet with door - Drive: 400 V / 1.5 / 2.3 kW - Space requirements approx.: W 500 x H 1800 x D 950 mm - Weight approx.: 200 kg

Condition: good (used), 1 x Bench drill with threading attachment. Solid TB 13 in good technical condition. Nljdpfx Ajwyw Apokxeh Technical data: Chuck: BT 16 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: 1 x Röhm drill chuck 1 - 13 mm with key 1 x Threading chuck The machine can be inspected while powered on.

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Nodpfx Ajxtu D Ujkxolh Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5123, Offer 26251 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling diameter in steel ST 60: 40 mm Long spindle, MK 3 Drilling spindle speeds, stepless: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Electric foot switch Space required: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand Nsdpfez Df Shox Akxjlh

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Type / Model: BT18STP Drilling capacity: 30 mm Threading capacity: M25 Spindle mount: MK 2 Speed range: 120 to 2,160 rpm, continuously variable Overhang: 230 mm Vertical adjustment: 300 mm Table: 600 x 600 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table - spindle nose: 40 to 310 mm Vertical adjustment: 270 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 160 kg Dimensions with table: 600 x 600 x 1,200 mm Nodpozcuypefx Akxjlh

Condition: good (used), Storage location: 3092 Manufacturer: WEBO (presumably) Nljdpfozx Rxrox Akxoh Type/Model: B3 Drilling capacity: 6 mm Spindle mount: Drill chuck Speed range: 1,600 to 9,000 rpm Overhang: 100 mm Table: 230 x 180 mm Stroke: 50 mm Total power consumption: kW Motor: FDM120/40.3401/2, 2,880 rpm Accessories/Equipment: Condition: good Footprint: 230 x 270 mm Weight: Dimensions: 230 x 440 x 400 mm

Condition: good (used), Storage location: 3111 Manufacturer: IXION Year of manufacture: 1998 Nedpfxozcuzas Akxslh Type / Model: BT 15 Machine number: 186477 Drilling capacity: up to 16 mm Spindle mount: Drill chuck B16 Speed range: 480 to 3,800 rpm Table: 290 x 350 mm Overhang: 225 mm Stroke: 100 mm Head height adjustment: 300 mm Distance table-chuck: 70 to 370 mm Footprint: 290 x 440 mm Connection: 0.8/1.0 kW Accessories/Equipment: Drill chuck Condition: good Weight: Dimensions: 290 x 440 x 700 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 530640, Offer 26203 Nlodpfxjz Dgbde Akxeh Technical data: - Drilling capacity - in steel: 16 mm - Drilling capacity - in aluminum: 20 mm - Drill spindle connection: MK 2 - Drilling depth: 100 mm - Spindle/column overhang: 215 mm - 6 drill spindle speeds, stage 1: 200 - 1600 rpm - 6 drill spindle speeds, stage 2: 400 - 3200 rpm - Drive: 400 V / 0.7 kW - Drilling table with T-slot: B 250 x D 320 mm - Max. distance drill chuck / table: approx. 220 mm - Space required: approx. W 300 x H 1050 x D 450 mm - Weight: approx. 100 kg - Quick-change drill chuck: 1 - 13 mm - Coolant system - Original machine base cabinet

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm Nlodpfx Asrwl Nnjkxjh - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm Nljdporwmbgjfx Akxjh - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Nlodpfx Akjzff A Eexjh Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: ready for operation (used), functionality: fully functional, TOS Varnsdorf WHN 13 Year of manufacture: 1979 Travel ranges: 3000 x 2000 x 800 mm Table load capacity: approx. 18 tons Table size: 1800 x 1800 mm Heidenhain 310 TNC control Nlodpfez Dxq Dox Akxsh 37 kW Spindle: Diameter 130 / SK 50 / S800

Condition: ready for operation (used), functionality: fully functional, Union table drilling machine BFT 105 Heidenhain TNC 155 Year of manufacture: 1988 Njdpfxsz Ei Ucj Akxelh Table load capacity: approx. 4 tons 24 kW spindle: diameter 105 / SK 50 / S2000 Travel distances: 1750 x 1100 x 800

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available Njdou N E Evjpfx Akxelh *