Used Drill Radial for sale (5,070)

Condition: good (used), MAS VR8A Arm 2500 mm MC 6 10,000 kg Hodpfx Aasxx Dapemjh

Condition: used, Year of construction: 1990, Radial Drilling Machine Z3050 x 16 I Spindle: Ø 80 mm Spindle exit: 300 mm Spindle speed: from 25 to 2000 RPM Arm travel: 1600 mm Year of construction: 1990 Column diameter: Ø 320 mm Maxi distance spindle nose/table: 1800 mm Mini distance spindle nose/table: 1200 mm Hsdpfsxxax Uox Aamjh Table useful dimensions: 1700 x 1000 mm Tailstock CM5 Hydraulic clamping trolley + arm + column Auto advance non-functional Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2400 x 1200 x 3200 mm Weight: approx 4 T

Condition: good (used), 12 speeds 44–1500 rpm. TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Hsdpfx Aasxxv Rasmsh Transport dimensions: Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm Hjdpop Atipsfx Aamoh distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Hedpfx Aasuxrtfsmoh Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW Hedpoxvzx Djfx Aamjh - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Hsdpexwcyfsfx Aamjh Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Hedpfx Asq E Izmjamoh Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Hedexcf Hfspfx Aameh

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Hodpfx Aaoxcyz Romeh Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Hsdjulz Iwepfx Aameh

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Hjdsxftk Ropfx Aamoh Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min Hsdpjvmtlhsfx Aamsh - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Hedjuix Sgspfx Aamjh Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Hjdpevwbccjfx Aameh Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Shell diameter: 400 mm

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Hedpsvylh Ujfx Aameh Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: good (used), Manufacturer: KOVOSVIT MAS Type: VO 50 / 1600 Year of construction: 1998 Specifications: Metric Metric US Standard Arm length 1600 mm Max. Drill Ø iron 60 mm Max. Tap diameter 42 M Quill stroke 310 mm Max. Distance spindle - table 1505 mm Min. distance spindle - table 320 mm Table / footprint 1470 x 986 mm Spindle speed 2500 rpm Tool holder 6 ISO/Bt/Mk Quill Ø 55 mm Power output 4 kW Dimensions (estimate) length 2900 mm Hodpfx Aor Dr T Ieameh width 1200 mm height 3200 mm weight 4700 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Hodpfx Asxu Icyeameh Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: used, Radial Drilling Machine SCHLUMBERGER type RF6 Manual raising Cone: CM4 Spindle speed: from 35 to 1800 RPM Table size: 1000 x 650 mm Column slide travel along bed: 750 mm Maxi distance spindle nose/table: 700 mm (in high position) Hsdpfx Aexu Icmoamoh Mini distance spindle nose/table: 250 mm (in low position) Manual up/down of table + column Automatic descent Rotation at 360° on column Hydraulic column locking Drilling / tapping function Lubricant pump Voltage: 380 V Width: 1400 mm Depth: 900 mm Height in low position: 2650 mm Height in high position: 3000 mm Weight: approx 3 T

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Hedpfjxu Ibpox Aamsh Weight: approx 3,5 T

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Hjdpfx Aaoxu Iaromeh Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Hjdpfjxu H Uusx Aameh Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm Hodpfx Asg A Inwoamoh table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm weight: 3000 kg

Condition: used, machine/vehicle number: 135, drilling capacity in steel (diameter): 60 mm arm length: 2000 mm min./max. distance between supporting surface and boring spindle sleeve: 525/1690 mm spindle sleeve stroke: 310 mm spindle taper MK: 5 mounting table: 1900 x 1100 mm rotations: 30 - 1250 rpm carriages: 0,08 - 1,35 mm spindle drive: 5,5 kW Hsdpfx Aasb S E H Rjmeh weight: 5700 kg space needed: 2975 x 1100 x 2950 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Hedpfxormkfns Aamoh Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB