Radial drilling machine

BREDA R 60-2000

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Nkedpfx Adjtt Nd Rswot Machine LxWxH: 190 x 120 x 135 cm

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos). Nkjdpfx Adeiv S Avowjt

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with Nkjdpfx Aefrzvledwot - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² Nedpfofrvzvjx Adwskt casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Nkedpfx Adowki Apewet Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table Nedovz Aydspfx Adwjkt 4500 x 1,000 x 1,000 mm stroke 19-ton weight

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Njdpfx Adju Sn Hzowskt Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

Condition: new, prebending: 6,0sheet length: 3100sheet thickness: 8,0total power requirements: 11,0weight approx.: 6,7messurements (LxWxH): 4,88x1,16x1,18 Njdpsd Ab H Hefx Adwekt

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Nodpfx Aswk D Efjdwjkt Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. Nkedpfx Adoul Efmewot The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data