Used Dry Air Dryer for sale (28,748)

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Iodpsinur Asfx Aiysig

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek Dryer Iiodjvrubnopfx Aiyjg Type: DDM 60 ALB Labotek CON-EVATOR material handling system Type: PGT 4/DDM Power: 0.5 kW PRICE REDUCTION FROM 1150 TO 750 EUR!!!

Condition: repair required (used), Two desiccant dryers in need of repair. Suitable for a hobbyist or as a source of spare parts. Type MDC 800 Capacity: 42 kW Year of manufacture: 1990 and 1994 PRICE REDUCED FROM 2850 TO 1200 EUR FOR BOTH!!! Iijdpfx Ajxtvb Ijiysg

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Iijder A El Eepfx Aiysg Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C Iijdpfx Aijzlxq Njyog - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, volume flow: 858 m³/h, total width: 1,060 mm, total length: 1,530 mm, total height: 1,513 mm, pressure: 16 bar, overall weight: 600 kg, operating pressure: 16 bar, input voltage: 400 V, type of cooling: air, pressure (max.): 16 bar, power: 1 kW (1.36 HP), input frequency: 50 Hz, Equipment: type plate available, compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Iedpfeyfpbtsx Aiysig Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

Condition: like new (used), Year of construction: 2015, COMPAIR F 0260 HS refrigerant dryer CAPACITY: 26 m3/min Iisdjzpbtnspfx Aiyog Year of manufacture: 2015 DRYER IS IN FULLY OPERATIONAL CONDITION.

Condition: new, Year of construction: 2026, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Isdpfoi Hplrjx Aiyoig Weight: 615 kg

Condition: used, Manufacturer: STT Type: Dryer 1500 Factory/Manufacturer number: 930671 Device type: Refrigerant dryer / Compressed air dryer Supply voltage: 400 V Phases / Frequency: 3-phase / 50 Hz Control voltage: 230 V Power consumption: 5,505 W Current consumption: 10 A Isdpjzx Tiyofx Aiyjig Refrigerant: R134a Refrigerant charge: 830 g Design: Stand-alone unit

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Desiccant dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 4 insulated granular material silos, each with a capacity of 200 L Iiedpox Na Itsfx Aiyjg With additional heating 3 material separators Manufacturer: Colortronic This system has been checked for all functions and is fully operational! PRICE REDUCTION FROM 6450 TO 6200 EUR!!!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer: Fasti GmbH Type: ERD 65 B Rated power: 0.9 kW Isdpfx Aiovzwrboyoig PRICE REDUCTION FROM 700 TO 550 EUR!!!

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Iedpfx Aow Dppvjiyjig Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Used Atlas Copco FX6 refrigerant dryer Isdpfozrtbiex Aiyeig 2.34 m3/min 14 bar Year of manufacture: 2019

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1.8009.40010, Available immediately Loading possible Net price Isdpfov Sx Rysx Aiysig

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Iiedey R Tdwepfx Aiyog

Year of construction: 2018, condition: used, Motan dryairtank LBA 400 – H-O-O-Z year: 2018 price: 3.450 € Isdpotphhcsfx Aiyoig contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON Isdpfxeyh Uvxj Aiysig MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. Iedpfxeq Nfuzs Aiyeig 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: repair required (used), Year of construction: 1996, Desiccant air dryer in need of repair. Suitable for a hobbyist or as a source of spare parts. Type CTT 342 Capacity: 39 kW Iedjxtvcfspfx Aiyjig Year of manufacture: 1996 PRICE REDUCED FROM 1500 TO 1200 EUR FOR A HOBBYIST!

Condition: good (used), functionality: fully functional, Labotek dryer Type: DDM 120 ALB Iisdpfx Aevtxmweiyjg Power: 8.9 kW Labotek material conveying system CON-EVATOR Type: PGT 4/DDM Power: 0.5 kW PRICE REDUCTION FROM 1150 TO 850 EUR!!!

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE TH371 S/N 1002 YEAR 2013 POWER (kW) 4.3 CAPACITY (m3/min) 32 Isdozu Rvcopfx Aiyjig PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER R404a 14kg HEAT EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS CONNECTION NEW/USED USED

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Iiedpozunvaefx Aiyeg Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Year of construction: 2004, condition: used, Koch dryair tanks 2x200 L 2x100 L with auxiliary heating Regulator Art.-Nr.: 2295 Iedpfx Ajxltf Usiysig year: 2004 price: 7.900.00 contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Power supply: 400 V. Frequency: 50 Hz. Electrical power: 17.4 kW. Phases: 3 Ph. Maximum compressed-air pressure: 14 bar(e). Maximum compressed-air temperature: 70°C. Permissible ambient temperature: min. 0°C / max. 40°C. Refrigerant: R410A. Refrigerant charge: 10.5 kg. Refrigerant GWP: 2,088. Maximum high-side refrigerant pressure: 40.6 bar. Maximum low-side refrigerant pressure: 30 bar. Certifications: CE / EAC. Indicative airflow for this model: approximately 1,750 l/s, equivalent to around 105 m³/min or 6,300 m³/h. Ijdpjzvcdbjfx Aiysig Approximate dimensions: Length: 1,474 mm × Width: 1,579 mm × Height: 2,295 mm. Approximate weight: 910 kg.

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm Ijdpfxezv Tfpe Aiysig - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps