Used Dry Kiln for sale (3,910)

Year of construction: 2013, condition: used, Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction capacity: 250/300 m³/h Final pressure: approx. 100 mbar (abs.) Hedpfx Aaocfw Tnebjnu Accessories: Suction filter; Operating instructions Delivery time: short term

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Hnedpfxewbqrts Aabsu Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: used, Smoking Kiln Make: Afos Model: Double Maxi Hnedpowp R Nhsfx Aabeu Capacity: upto 127kg per cycle Hot and cold smoke Separate smoke producer Floor standing, lifts as one piece. Ex Fish factory

Condition: ready for operation (used), Condition Used Hodpsvyvm Uofx Aabenu Stock Number 58760 This listing is for a Thermo Scientific Drybath Adv 2blck Dry Bath/Block Heater. The unit is in full working condition and is ready for immediate release. This unit is supplied with heat blocks. The Thermo Scientific Drybath Adv 2blck Dry Bath/Block Heater is a top-tier laboratory device for precise temperature control and uniform heating. You can find it for sale on LabX and auction platforms like HGP Auctions, ensuring you have options for purchasing this essential instrument. Perfect for various lab applications, it guarantees reliability and accuracy in your experiments. Key Features:Digital controls and display of time and temperatureAdvanced internal temperature sensing probe for outstanding temperature accuracy and controlPrecise temperature control with PID circuitTemperature calibration allows the user to offset the temperature to desired valueTimer allows the user to accurately monitor the heating timeWide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfectingPowder-coated steel body construction ensures durabilityBuilt-in over-temperature protection device ensures sample and user safetyTemperature deviation adjustment Applications:Sample preparationEnzyme preservationEnzyme-substrate reactionsDNA amplificationElectrophoresis gel degenerationSerum coagulation

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: Econored II, EconoRed II-54 drying tunnel - Vastex - Year 2011 - Good condition. Hnjdpfxswbd A Es Aabju Equipped with 2 x 7200-watt infrared panels. Dryer for curing plastisol ink, water-based screen printing ink, and more. Numerous settings: - Adjustable belt speed with digital display - Adjustable temperature on digital display - Infrared height adjustable from 5 to 17 cm using a dial - Teflon belt with exclusive patented drive system Technical specifications Power: 14,400 watts Total length: 221 cm Belt width: 137 cm

Year of construction: 2010, condition: used, Claw vacuum pump Dry Manufacturer: Busch Hnedpjdkaf Uofx Aabsu Type: Mink MM 1322 AV Motor: DS 400V Suction capacity: 300 m³/h Final pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: As good as new Accessories: Suction filter; Instruction manual Delivery time: short term

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Hnsdpfx Aajd Spx Dsbou Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Condition Used Stock Number 8A This listing is for the Grant QBD2 Dry Block Heater The unit is in full working condition and is ready for immediate use The QBD2 Grant block warmer is a versatile, general purpose dry block heating system with 2 custom made blocks Hnsdpfx Aaswf S Uqsbeu The Grant QBD2 is a high-performance digital dry block heater designed for accurate and consistent sample heating in a wide range of laboratory applications. Ideal for molecular biology, clinical, and general lab use, it offers flexibility with interchangeable blocks and customizable features.

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek finish Gas chamber furnace Type G.11.01 With loading trolley Maximum temperature 200 ° C BJ. 1991 3 x 380V 54 kW Approximate inside dimensions (B1900mm x T2940mm x H1965mm) Hedpfx Ajd Spxvsabsnu More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), machine/vehicle number: 140916011, Condition Used Stock Number 412964 This listing is for a Star Lab N2400-4002 Dry Bath System. The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Weight: The system weighs 2.8 kg. Applications: Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies Hjdpfxsvi Arpe Aabsnu In situ hybridisation Hot Start thermocycler reactions

Condition: new, Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Hjdopgq Dkepfx Aabsnu Condition: unused item, but shows slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's technical data:Hydraulic dataMinimum efficiency index (MEI)0,4Minimum. Fluid temperature T min-20 °CMax. Fluid temperature T max140 °CMax. Ambient temperature T max40 °CMax. operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWRating current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87, 6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kW-Motor winding from 4 kW-Isolation classFShield type motorIP55Motor protectionNEINYou can find more pumps (Wilo and other manufacturers) and other products for industrial needs in our stores. PSH3R6Cright approx. 100 kg

Condition: ready for operation (used), machine/vehicle number: J11422004, Condition Used Stock Number 41741 This listing is for a Grant QBD1 Digital Dry Block Heater. The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: Hnedpfeuybfaex Aabeu High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Year of construction: 2017, condition: like new (used), Hobart 305 GTP Dry steam fast cooker  Gentle, healthy cooking: Steaming, stewing or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food being cooked Extremely short cooking times Individual temperature programme as standard: 50° - 99°C Electronically controlled programme sequences Compact table-top unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm deep or 1 x 1/1 GN up to max. 200 mm deep Multi-setting, the connected load can be reduced to 18.2 kW with hot water connection (capacity then approx. 550 portions/h) Hsdohtriwjpfx Aabonu Automatic defrosting Water level control with display Fully electronic control for time input Self-diagnosis with error display Chamber pressure is displayed digitally Steam destruction with built-in vapour condensation Automatic boiler emptying with drain pump after end of operation Automatic self-cleaning of the exhaust steam destroyer at the end of operation Electronics pre-equipped for cooking with core temperature sensor Potential-free contacts for connection to power optimisation system Dokuset: Documentation system according to the HACCP concept, data storage and output via infrared interface (Data can be read out with a conventional pocket PC, not included in the scope of delivery) Technical data: Portions / hour: approx. 650 Dimensions: W 600 x D 700 x H 950 mm Soft water connection for steam generator: R 3/4". Drain connection: R 1 Electrical connection: 400 Volt / 50 / 3 / N / PE - 27,2 kW - Fuse protection: 3 x 50 A Year of manufacture: 2017 Condition: almost unused/ as new UVP: 23.800,00 € Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. Hnodpfjq Igyvjx Aabeu B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Hnedpfsrp D Uxsx Aabsu Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Hnodpewx E Nbefx Aabou Do not hesitate to contact us for a personalised price quote.

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage Hnedpsxlppijfx Aabju -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximate 0.75 sqm drying area. It features three individual drying compartments, each 500mm wide x 500mm deep x 160mm high. The unit includes a hot oil recirculation system and one Leybold vacuum pump. It also comes with an electrical cabinet and a separate control cabinet. The main unit is mounted on a mild steel frame. Hodpfx Aaexnl Srobenu

Year of construction: 2024, condition: new, functionality: fully functional, controller manufacturer: Siemens, conveyor belt length: 2,200 mm, Equipment: CE marking, Drying Mate Belt Conveyor Dryer No. 10093 – New, Unused, In Stock (Vilnius, Lithuania) Belt dryer designed for mealworm larvae and other porous, non-fluent products suitable for conveyor drying. Hnodoxfrxgspfx Aabeu Purchased in 2024, never installed (solved the need via outsourced services) – still in original packaging, unused, CE-marked, and ready to ship. Includes complete operation manuals and technical documentation. Key specs: Max. drying temperature: 200 °C Evaporation capacity: 4 kg/h Conveyor belt: 2.2 m length × 300 mm width (woven glass fiber, Teflon coated) Adjustable drying time: 15–100 min Electrical heating: 4.6 kW (expandable) Siemens PLC with HMI touchscreen Full stainless steel AISI 304, hygienic design, EC 1935/2004 compliant Dimensions: 1.6 × 0.6 × 2.4 m Power: 400 V, 50 Hz Condition: New, unused, in original packaging. Availability: Ready to ship immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. Hnsdpsq Nfuzofx Aabeu When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar Hjdpfx Aast A Uwtobjnu level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: used, Year of construction: 2010, operating hours: 75,774 h, functionality: fully functional, Used Mark compressor with dryer. Used, in working condition. Available at the end of July 2025. Hedpfxowprvie Aabjnu

Condition: used, Year of construction: 2017, functionality: fully functional, FST Drytec 2x dryers type VE Hnodpfexl Rtpjx Aabou

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Factory consists of: Conveyor dryer: Hnsdsvt Rmvepfx Aabju • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

Condition: like new (used), Chanber size: Hnedped Sm Disfx Aabju 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °