Used Varnish Dryer for sale (1,853)

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Hsdpfxoyzaame Airew Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Hedpsyy U I Nefx Airow Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Hodpfx Aiezw Apgerow Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m Hjdpfozg Iw Isx Airsw - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Hjdpfx Ajzf Ivujirew Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Scott AST Air Swept Tubular Dryer Hsdpozvgiujfx Airow Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Hsdpfx Aieq Igyvorow Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling units Manufacturer: ICEVA Type: GS-4mD Hsdezaum Dspfx Airow Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3250 TO 2900 EUR!

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Hsdjy R Tdwepfx Airjw

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Dry air dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 Hjdpfx Aiex Na Iterow 4 insulated granular material silos, each with a capacity of 200 L Equipped with an additional heater Material separator, 3 units Manufacturer: Colortronic This system has been inspected for all functions and is fully operational! PRICE REDUCED FROM 6200 TO 5500 EUR!!!

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 500 h, Equipment: CE marking, documentation/manual, FrostX 50 Freeze Dryer – 2026 – Very Low Operating Hours For sale is a FrostX 50 freeze dryer, manufactured in 2026, from our food processing business. The machine was delivered in May 2026 and has only been used for a limited number of production and test runs. It is in very good condition and fully operational. Equipment / scope of supply: - FrostX 50 freeze dryer - Year of manufacture: 2026 - Very low operating usage - Original product trays - Tray transport cart - Silicone mats - Manufacturer documentation and operating instructions available The unit is suitable for freeze-drying food products and other suitable materials. Further technical specifications are available in the manufacturer documentation. The machine can be inspected and demonstrated by appointment. Reason for sale: Reorganisation of our production concept as part of a planned capacity expansion. Price: EUR 34,900 net, negotiable Location: Germany Loading can be organised or assisted by prior arrangement. Transport can be arranged by the buyer or discussed individually. Further photos, technical documentation and additional information are available upon request for serious enquiries. Hedpfx Ae Agpgmeirsw

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Hedpfjy Iplfjx Airsw Very little use Ex Pharma Facility

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Equipment and scope of delivery: - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring Hedpfx Aio Afb Alorow - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Hodpfoyvfkrox Airjw Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Hedjz Rz Dnepfx Airow Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: good (used), Year of construction: 2001, Digicolor dryer Year of manufacture: 2001 10,000 watts Hodpfxj Ag Svvo Airow With container, approx. 200 liters Model: DT 204 M

Condition: good (used), Year of construction: 2018, temperature: 95 °C, inner dimension length: 7,700 mm, inner dimension width: 10,000 mm, inner dimension height: 3,200 mm, total length: 10,026 mm, total width: 10,230 mm, total height: 4,710 mm, number of chambers: 3, control type: manual, actuation type: electric, fuel type: electric, # For Sale – Hamech SK-185 Industrial Wood Drying Kiln Complex (3 Chambers) For sale: Complete Hamech SK-185 industrial wood drying kiln complex, consisting of 3 drying chambers. The installation was commissioned in 2018 and is CE certified. The drying kiln complex is still in continuous operation and can be inspected while running at our facility. ### General Information - Manufacturer: Hamech - Model: SK-185 Hodpfxe Afx Nqj Airjw - Number of drying chambers: 3 - Year of commissioning: 2018 - CE certified ### External Dimensions (per chamber) - Width: 10.23 m - Depth: 10.26 m - Height: 4.71 m ### Internal Chamber Dimensions - Width: 10.00 m - Depth: 10.03 m - Height: 3.20 m ### Maximum Loading Space Dimensions - Width: 10.00 m - Depth: 7.70 m - Height: 3.20 m ### Technical Specifications (per chamber) - Maximum drying temperature: 95°C - Maximum heating system pressure: 0.6 MPa - Humidification system pressure: 0.2–0.3 MPa - Average thermal power consumption: 345 kW - Electrical power consumption: 25.5 kW - Humidification system capacity: 210 l/h - Loading volume: 148 m³ Detailed technical specifications are available upon request. Location: Andrychów, Poland Feel free to contact us for more information or to arrange an on-site inspection. The drying kiln complex can be viewed during operation.

Condition: good (used), Year of construction: 2005, Drying machine, DIGICOLOR Year of manufacture: 2005 Hsdpfx Aie Ag Sygjrow Model: D 204 10100 W

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: Hjdpfx Aie Ad Ey Eorew - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Hjdpfxs Agr Ewe Airew Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Hodpfx Asrp D Uxsirew Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. Hedpfx Aisua D U Iersw A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: good (used), Year of construction: 2011, Refrigerant dryer, Kaeser, TE 91 – used: Hodpfx Ajz Sd Iyoirsw Price ex-works: €1,750 (net) plus dismantling costs, etc. Manufacturer: Kaeser Type: TE 91 Year of manufacture: 2011 Article number: 1.8008.50010 Serial number: 3027 Refrigerant: R134a Refrigerant charge: 1.950 kg Operating pressure: 18 bar, or 16 bar Max. operating pressure, air system: 16 bar 400V/3/50Hz Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer Manufacturer: Motan Type: ADC 200/10/20 Connection value: 5.6 kW Dry air volume: 200 m3/h Hsdpfx Aisyvfiberow 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 liters Heating capacity: 4.5 kW Fan power: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Hodsy N T Utepfx Airew Transport height: up to approx. 3000 mm Device weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available PRICE REDUCTION FROM 1350 TO 1200 EUR per unit!