Used Drying Furnace for sale (2,627)

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Isdoxfcdyopfx Aabetn Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CE Glass 2100mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New water suction rubber, new bearings. Working direction: from right to left Max glass height: 2100mm Number of brushes: 4 (also for Low-e glass) Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor The machine is fully inspected, cleaned and in perfect working order and can be viewed on our premises! Iodexb N Rfjpfx Aabjtn

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Chamber furnace, very good condition. 12 months warranty. With pull-out base, fully refurbished. The furnace is not suitable for hot removal, but stress-relief annealing is possible! Tmax 1320°C Capacity: 330 liters Internal dimensions (W x D x H): 590 x 720 x 800 mm External dimensions (W x D x H): 930 x 1310 x 1840 mm Controller: TC 707 (99 programs with 48 segments each) SIC plates on bogie hearth (new) 5-sided heating (new) Manual intake and exhaust damper (new) Load weight: 40 kg per 100 liters (total 132 kg with all plates etc.) Power: 22 kW 3/N/PE 400V AC CEE 32 A connection Documentation, CE declaration Refurbished / New Parts: Ijdpfx Asu Tqzzoabstn Contactors, complete heating system, bogie hearth lined with lightweight refractory bricks, bogie hearth SiC plates, seals, manual intake and exhaust damper. Inspection at our facility by appointment. Call us! Furnace, furnaces, industrial furnace, chamber furnace, kiln, drying oven, tempering oven, laboratory furnace, ceramic kiln, hardening furnace.

Year of construction: 1996, condition: good (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic Iedpew R Szgefx Aabjtn

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy Ijdpfow Ifl Tsx Aabotn Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Year of construction: 2025, condition: new, Drying container WISSMATEC Drying floor Hydraulic moving floor Year of manufacture 2025 Optional: - Discharge and dosing screw conveyor - Rotary valve Isdoxd Uznspfx Aabjtn - Hydraulic lid - Manual lid - Cyclone - Ventilation system

Condition: excellent (used), Year of construction: 1990, 8 heating sections 1 cooling section Iodpfx Aasw Em Ekjbstn Pres dryer

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, Iodpfx Aajw Tm Tijbotn including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording Itsdpfx Aaotbq Eqoben - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) Ijdpow R Sy Njfx Aabjtn - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace Ijdpjm E Tvhefx Aabetn YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V Ijdpfx Asi Db Dbeabjtn total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Year of construction: 2025, condition: new, Equipment: CE marking, A single-chamber kiln, type EKOPOL 1/78, with air circulation, computer-controlled, designed for a net load of approximately 78 m³ of timber (at a 36% chamber fill rate). ===== Itsdpfxow U Ayne Aaben Product in stock Condition: NEW Year of manufacture: 2025 Control system with a lifetime license – available in the following languages: English, German, French, Polish, Russian, and Ukrainian. Remote access: android/ios/windows/macos 2-Year Warranty ===== Loading space dimensions: - Loading width: 13 m - Loading depth: 4 m - Loading height: 4.1 m - Gross loading capacity: 214 m³ - Net loading capacity: 78 m³ (with 36% fill rate) ===== Single-chamber kiln, type EKOPOL 1/78 + Heat distributor with fittings. Includes equipment, installation (self-sufficient team of four fitters, a service technician, an electrician team, and an electronics technician – all equipped with complete tools), commissioning, training, and start-up: €108,000 ===== Optional equipment: 1) Heat recovery system + €25,000 2) Control room + €7,500 3) Inverter + €7,000 Drying kilns manufactured by EKOPOL meet the requirements of the New Approach directives and bear the CE marking, confirming compliance with Polish and EU legislation. EKOPOL chamber dryers are certified with the EU EC declaration of conformity issued by an independent product certification body. The manufacturer provides an EC declaration of conformity. To ensure the highest quality of products and services, EKOPOL has implemented an ISO 9001:2015 quality management system certified by TUV Rheinland Polska. Currently, more than 1,455 wood drying kilns produced by our company are operating across Europe.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Itodpfx Asxdanteabsn

Year of construction: 2024, condition: as good as new (ex-display), 12-month warranty, in-stock item, new device - Model on castors - Maximum temperature: 300 °C - Oven chamber volume: 1,050 liters - External dimensions: 1,470 x 970 x 1,920 mm (W x D x H) - Oven chamber dimensions: 1,200 x 670 x 1,400 mm (W x D x H) - Controller C550 with 10 programs, each with 20 steps Additional equipment: - Port for thermocouples: inner diameter 44 mm - VCD process documentation (CD): Analysis via Nabertherm VCD software with Ethernet port, software for visualization, control, and documentation - Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/- 5 °C in the empty usable space (with exhaust flap closed) - Maximum batch weight: 250 kg with distributed load - Maximum load per rack: 30 kg with distributed load - Reinforced floors and rails for 80 kg distributed load available on request - Supplied racks: 4 pieces - Maximum number of racks: 14 pieces, available at short notice - Connected load: max 9.3 kW - Fan capacity: approx. 500 m³/h - Connection: 380-415V 3/N/PE 50 Hz - Net weight: 450 kg - Documentation, CE Declaration Iedpsiqkr Iofx Aabstn Packaging on pallet: 170 x 135 x 210 cm, 450 kg Inspection in our warehouse possible at any time! The oven is not to be used for solvent-containing substances, or for heating food, animals, wood, grain, etc. Oven, ovens, industrial oven, heating cabinet, thermal oven, laboratory oven, drying oven, tempering oven, test chamber

Year of construction: 2002, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures. Itjdpew R Sy Asfx Aabon

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace Itjdpfx Aevkhl Djabon TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. Iedewcznbjpfx Aabjtn The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Condition: used, Drying machine ROUSSELET Iodpfx Aasxdnwvobetn

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW weight of the machine ca. 100 kg control "Thermocomputer TC 5040" Isdpfow Rrf Sjx Aabotn

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm Itedjp H Tb Tjpfx Aabjn - Power consumption: 240 kW - Current consumption: 350 Amps - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Screen recorder: JUMO Logoscreen 601 - Includes cable entry and 6 additional sockets for logging customer type K thermocouples - Multi-zone design (3 zones) - Control cabinet with solid-state relays - Climate control for switching cabinet - Automatic supply and exhaust air dampers - Exhaust air dampers controlled automatically: - Minor cooling (2 dampers open) - Major cooling (all 6 dampers open) - Regulated cooling system (includes frequency inverter, controlled via temperature control system) with supply air fan - Electrically driven bogie hearth on rails - Max. loading capacity 3.5 t; reinforcement available on request! Metal loading platform for bogie hearth available on request! - Swing door - Documentation, CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer on-site installation, commissioning, and staff training. Please contact us! Keywords: bogie hearth furnace, furnace, annealing furnace, kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Isdpfew R Sypjx Aabotn Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Itedpfx Aoun R Ufeabsn Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Itodpfx Aaew R Sx Sjbjn All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm Itjdpfx Ajw R Srroabsn batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen