Used Deckel G1L for sale (667)

Condition: good (used), Year of construction: 1969, Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm Nwsdpfxeidckfe Aqveg longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm Nwjdjy Szq Uspfx Aqvsg B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW Nodsy Raluopfx Aqvewg weight of the machine ca. 5,7 t

Condition: ready for operation (used), Year of construction: 2001, operating hours: 44,134 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: HEIDENHAIN TNC426/430, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,150 mm Travel range, Y-axis: 710 mm Travel range, Z-axis: 710 mm Spindle speed, max.: 12,000 rpm Table dimensions: 1,500 x 800 mm Table load capacity: 1,100 kg C-axis: 0 - 360° Tool interface: SK40 Number of tool magazine positions: 32 MACHINE DETAILS Operating hours: 44,143 h Control system: HEIDENHAIN TNC426/430 Total connected load: 62 kVA Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,800 x 3,000 mm Nodpey Uk Hwofx Aqvewg Machine weight: 9,700 kg EQUIPMENT Coolant system NC rotary table mounted on the machine table Chip conveyor Electric handwheel Manuals / Documentation

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 4,550 h, Controller SIEMENS SINUMERIK 810/840D Table size 800 x 500 mm Table load 500 kg X travel 630 mm Y travel 500 mm Z travel 500 mm Spindle speed 8000 rpm Tool holder type SK40 ATC magazin 24-fold Repid speed 30 m/min Weight 4500 kgs Dimensions LxWxH = 3100 x 2100 x 2400 mm Accessories - Coolant tank Nwodpfxsy T I Aye Aqveg - Manuals The machine was used barely. Good condition.

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t Nodou Idffopfx Aqvswg dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h Nwodpfou Idgcox Aqvog operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA Nwedpfx Aqou Nc Twjvsg machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h Nwedpfx Aow A I Uusqvog operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head Nwsdpfx Aqju U E T Ievog joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit Nedju Ndcmspfx Aqvjwg *

Condition: not inspected (used), This top cover for a Maho DMU 60T machining center, including accessories, will be auctioned off in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." Nwsdpfxsy Ux N Ho Aqvog You will find this and many other items from the fields of injection molding technology, production and workshop equipment, temperature control units, lifting equipment, eroding machines, measuring instruments, transport and social area equipment, and more on our RESTLOS auction platform!

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nwsdpfx Ajy Umhdjqvjg Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min Nwjdpfx Aqetumqvovog tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit Nodpfjy Uvnyox Aqvowg

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Nwsdpfewrdu Aex Aqveg Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. Nsdpfxjhvz Iio Aqvswg For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: good (used), Year of construction: 1980, Engraving machine and copy milling machine Manufacturer DECKEL Type: GK 21, year approx. 1980 Maximum cutter diameter: 10 mm Spindle speeds 475 - 20,000 rpm Travel paths: 160 mm Y300 mm Z 365 mm Table: 200 mm X 360 mm Nsdpfx Aovk D A Eeqvswg Machine cabinet with lots of accessories and machine documentation available. Weight: 620 kg.

Condition: excellent (used), Year of construction: 1988, Tool grinding machine, manufacturer MICHAEL DECKEL, model S0, year of manufacture 1988. Comes with accessories and operating manual. In very good original condition. Nwsdpfeyxgm Iox Aqveg Further data can be found in the specification sheet.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need. Nwodpfxsdtdahs Aqveg

Condition: used, x-travel 1.000 mm y-travel 800 mm z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min table dimensions 1.250 x 800 mm Nodpfx Ajy T Sb Teqvswg number of tool places 30 Pos. In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1997, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout, Tool magazine - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Nwedpfx Aqey Uv U Hjvsg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Nwedsyay D Uspfx Aqvjg Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Nedoyaywbspfx Aqvjwg Weight approx. 6.5 t

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm Nedpfx Aqeyf Hymsvewg