Used Duplo 4000 for sale (3,841)

Condition: new, impact length 4000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm Hjdpjvkiv Rofx Aabonu weight 137 kg length in width 620 mm length in total 4400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Torque 76,4 Nm Hsdpsua Ituefx Aabonu current 38 A Unused grinding spindle for Höfler Rapid 1250

Condition: ready for operation (used), Spindle speed: 9000rpm, spindle tilt: -5°/45°, spindle stroke: 1000mm, spindle diameter: 30mm, table dimensions X/Y: 750mm/600mm, table height: 880mm, weight: approx. 300kg. An on-site inspection is possible. Hnjdpfsxfviijx Aabou

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 10/2026, Rondostar 4000 Dough Sheeter Dough Sheeter Rondo Model: SFI 660 Computer control / touch panel Suitable for sheeting and laminating all types of dough With right-side dough winder Stainless steel design with base frame Adjustable rolling thickness from 0.2 to 45 mm Hsdpfxow U Iwle Aabenu Electric flour duster Mobile machine Power supply: 400V, 16A-CEE plug Dimensions: 3700 x 1235 mm (W x D) Used machine, cleaned With warranty & spare parts service Quality from a specialist workshop! Benefit from over 35 years of experience! Options: - Maintenance contract - Service package - Delivery service - E-Box for enhanced safety - Training & commissioning Visit our large showroom!

Condition: excellent (used), Year of construction: 2011, Mechanical swing bending machine Fab. Schröder Typ. MAK 3 4000 x 1,5 Year 2011 Hnjdsmkidvspfx Aabsu Technical data Make: Schröder Type: MAK 3 Year of manufacture: 2011 working length: 4020 mm Power at 400 N/mm²: 1,5 mm stroke upper beam: 250 mm lowering of bending beam: 80 mm angle: 0 - 180 power requirement: 6,0 kW weight: 4860 kg Dimension: L 5,2 x W 1,2 x H 1,7 m Equipment - Control POS 400 NC - piece counter - foot switch - rail quick clamping system - manual back gauge 750mm, optional - 1x set of split cutting tools 90mm - 2 pcs. bending rails 10mm, 25mm - hydraulic upper tool clamping All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2015, Technical Data: Capacity Max. Swing Diameter: Ø 600 mm Max. Turning Diameter and Length: Ø 370 x 750 mm Spindle Bore: Ø 82 mm Spindle Center Height from Floor: 1,140 mm Spindle Bearing/Bore Diameter: Ø 140 / Ø 90 mm Spindle Nose: A2-8 Spindle Speed: 4,200 rpm C-Axis Resolution: 0.001° Sub-Spindle Center Height from Floor: 1,140 mm Spindle Bearing/Bore Diameter: Ø 90 / Ø 53 mm Spindle Nose: F-140 Spindle Speed: 6,000 rpm C-Axis Resolution: 0.001° Travel and Rapid Traverse Travels X-Axis: 267 mm, Z-Axis: 840 mm Y-Axis: -50 to +70 mm, A-Axis: 780 mm Rapid Traverse X-Axis: 30 m/min, Z-Axis: 30 m/min Y-Axis: 10 m/min, A-Axis: 30 m/min Power Hnodpfx Aajwp Uhhebsu Spindle Motor (30 min. / 100% duty cycle): AC 22 / 15 kW Max. Torque: 618 Nm (S3 25%) Driven Tools Number of Turret Stations: 15 Max. Tool Speed: 6,000 rpm Drive Power (30 min. / 100% duty cycle): 7.5 / 3.7 kW Max. Torque: 48 Nm Tooling Live Tool Stations: 15 Tool Cross Section: 25 x 25 mm For Boring Operations: Ø 40 mm LNS Short Bar Loader Servo III Dimensions Height: 2,300 mm Depth (without chip conveyor): 2,140 mm Width (without chip conveyor): 3,000 mm Net Weight: 6,200 kg

Condition: good (used), Year of construction: 2007, Koenig Mini Rex 4000 bun roll machine 2-pocket drum and pistons SKG54-AKG70 weight range 25-140 grams cap. pcs/h 4000 Hnedovpvv Ijpfx Aabsu year of build 2007

Condition: good (used), Year of construction: 2008, functionality: fully functional, ALFA 4000 FGDMV/FGDL – Semi-Pneumatic Drum Dryer Type: Semi-pneumatic rotary drum dryer Application: Drying of wood residues and chips Condition: Used, industrial-scale equipment Location: — (Ukraine / EU border region – specify for listing) Technical Data Operation with Gas Burner (natural gas as fuel) Feed capacity: 17,500 kg/h Initial moisture content: 52% Final moisture content: 12% Water evaporated: 7,955 kg/h Thermal power required: 7,310,023 kcal/h (8.50 MW) Completely dried product: 9,545 kg/h Natural gas consumption: 860 m³/h Installed power: 210 kW Operation with Biomass Furnace (dry wood waste as fuel) Feed capacity: 17,500 kg/h Initial moisture content: 52% Final moisture content: 12% Water evaporated: 7,955 kg/h Thermal power required: 7,310,023 kcal/h (8.50 MW) Completely dried product: 9,545 kg/h Wood waste consumption (furnace): 2,284 kg/h Hjdpfx Aoxa Du Ajabenu Net dried product weight: 7,261 kg/h Main Components Special wood-fired furnace with refractory lining, secondary air fan, and 12 kW drive motor. Gas direct-fired furnace FGDMV 8000 (natural gas) with modulating burner, pressure stabilizers, flame control system, 8 kW motor, and central control box. Heavy-duty supporting frame made of carbon steel. Rotary drum (3 coaxial sections, internal lifters, flanged head with inspection hatches, support rings, 4 support rollers, geared group drive, 30 kW motor). High-efficiency fan with 166 kW drive motor. Cyclone filter group (4 × USA 1400 type) with distribution duct. Automatic lubrication line with electric pump, dosing nozzles, oil reservoir, and electronic drip system. Main electrical control cabinet equipped with Siemens S7-200 PLC, Siemens color touch panel, frequency converter Danfoss, Omron controllers, spark detectors, safety relays, and local operator devices. Highlights High-capacity industrial drum dryer designed for large-scale wood residue and chip drying. Flexible operation: natural gas burner or biomass furnace. Designed thermal capacity: 8.5 MW. Output of up to 9.5 t/h dried product. Complete with auxiliary equipment (fans, cyclones, control system).

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 Hsdjxak H Espfx Aabenu (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 1960, total height: 1,500 mm, total length: 1,400 mm, total width: 6,050 mm, Empty weight: 4.500 kg Price: On request - Drive system: Conventional - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 71 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 Hnedownhpiepfx Aabeu - Options: Removable bed - Swing over removable bed [mm]: 880 - Year: 1960 - Documentation available: No - Serial number: - Control: Conventional - Transport dimensions: 1400mm x 6050mm x 1500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2019, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2196028, Gerätetyp: Vollautomat Betriebsart: elektrisch Material: Edelstahl Produktkennzeichnungen: Hersteller-Art.-Nr: VA 4000/AT Gewichtsinfo: Gewicht: 130 kg Hnsdpfx Aaev Acm Tsbju Geräteanschluss: Anschlusswert: 600 Watt Netzspannung: 400 Volt Schnittstärke maximal: 10 mm Messergröße: 330 mm Länge (Breite): 1270 mm Tiefe: 853 mm Höhe: 1330 mm

Condition: used, Year of construction: 2016, Year: 2016 Condition: excellent Counter condition: approx. 91 thousand bindings Configuration * manual loading (possibility of purchasing an automatic loader) * automatic format adjustment * sewing and folding unit * 2x Rapid sewing head (sewing from staples, 5000-folder) * front trimming + delivery Technical specifications: * max. /min..format - 210 x 120 mm* up to 460 x 320 mm (*min. 148 x 210 mm with accessories) * programs - memories - 13 (10 preset, 3 custom) * sewing - 2 heads (center, block, corner) * sewing method - using staples (5000-folder staples) * folding without sewing - yes * speed - up to 2400 booklets per hour * paper capacity (80 g/m2) - booklets: up to 25 sheets Hnjdpfxsww Hyrs Aabou

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm Hodpfjhcnhmox Aabenu - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 20.4007.08/208-030, working range: 3,000 mm, sheet thickness (max.): 60 mm, total length: 13,000 mm, table length: 12,500 mm, table width: 3,000 mm, The non-functional machine can still be restored to working order with various repairs. The following machine components are defective and must be repaired: - Computer defective (computer not included) - Height control defective - Cable break in control wiring The flap extraction table was renewed around 2017 and is operational. Power source: Kjellberg Fine Focus 800 (last operated in 2024) Hnodpfxexfki Ds Aabju IHT PCS 2100 Linear Drive The machine must be dismantled and loaded on site by the buyer. An existing fully functional extraction system can be purchased separately if required (price negotiable).

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg Hedpfx Aexak Hxjabenu - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey Hnsdpfjv N Iuiex Aabou

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Hodpfsgb Rq Ssx Aabjnu Späneförderer , Bandfilteranlage

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter Hsdpov I Tfdsfx Aabenu - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm Hnsdpfx Aaoxak D Robeu - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - cutting gap adjustment - stroke rate depending on cutting length approx. 20 - 25 per/min - backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - hydraulic hold-down Hedpjibmaxofx Aabjnu - front angle stop - front support arms laterally movable - drive 400 V / 15 kW - foot switch - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg

Condition: used, Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm Hjdpfx Aaexabh Tebenu travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: used, Year of construction: 2008, machine/vehicle number: 1779, Offer 25027 Technical data: Hsdpfx Aaewptpdjbonu - Load capacity 5 t - Useful height 900 mm - Load pickup in the middle - Traverse beam HEA 260 6050 mm - Crossbeam HEA 180 with adjustable swivel hooks 4050 mm - Weight approx. 850 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: Hsdpfx Asxabc Roabsnu - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 4042, Offer 25216 Technical Data: - Max. turning diameter over bed: 1025 mm Hodewpfm Uspfx Aabjnu - Max. turning diameter over support approx.: 760 mm - Distance between centers: 4000 mm - Spindle bore: 180 mm - Spindle speeds: 70 to 450 rpm - 300 to 630 rpm - Feeds longitudinal / cross - Tailstock: MK 6 - Tailstock quill travel: 370 mm - Chuck: 1000 mm - Quick-change tool holder with various inserts - 2 x steady rest - Digital display HEIDENHAIN - Drive: 400 V / 20 kW - Space required approx.: W 6500 x H 2250 x D 2350 mm - Weight approx.: 11000 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: S 2560, Offer 23461 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 4 mm - hydr. cutting angle adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per/min - Motor backgauge 10 - 1000 mm - Cutting length adjustment - Hydraulic hold-down device - Front angle stop - Front support arms - Backspace protection - Pneumatic connection 6 bar - Drive 400 V / 9 kW - foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2100 mm - Weight approx. 9000 kg Hnedema Dcijpfx Aabju