Used Dz 750 for sale (7,959)

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Bedpfx Abjmqtzcjzsww With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, machine/vehicle number: PZEWL 160 R / HK, overall weight: 26,000 kg, Year of construction: 2001, Machine model: Zweiständer - Exzenterpresse Type: PZEWL 160 x 1 750 R / HK Serial number: A01006-03 Year of manufacture: 2001 Factory: Müller Type: PZEWL 160 R / HK Year of manufacture: 2001 Machine number: A01006-03 Included: Strap feed line, including: Strap width: 400 mm Strap thickness: 7.0 mm Compact unwinder Technical documentation (DE) Compatibility with EU directives: Machinery Directive 89/392/EEC (amended by 91/368/EEC, 93/44/EEC, 93/68/EEC) Low Voltage Directive 73/23/EEC Harmonized standards used: EN 292 Part 1 and 2 EN 60204 Part 1 EN 692 National specifications: VBG 7n5.1 ZH1/456 ZH1/457 General parameters: Height: approx. 4.70 m Width: approx. 3.41 m Depth: approx. 2.64 m Weight: approx. 26,000 kg Power consumption: 25 kW Technical parameters: Max. pressure at 6.7 mm before UT: 1,600 kN Torque at 120 strokes/min: approx. 9,350 Nm Torque at 40 strokes/min: approx. 10,700 Nm Gap under the piston guides: 1,750 mm Width between guides: 1,450 mm Table-piston distance (at max. stroke and top position): 560 mm Bwsdpfx Abowmmzuozsw Worktable: Dimensions: 1,700 x 1,050 mm Thickness: 160 mm Table hole: 1,200 x 240 mm T-slots: 7 pcs., width 22 mm, thread M20 Piston: Stroke: 8–160 mm Number of strokes: 30–120/min Height adjustment: 100 mm Clamping surface: 1,400 x 800 mm Compensation pressure: For the machine: 3.60 bar For a tool weight of 100 kg: 0.32 bar Drive - Flywheel: Speed: 171–685 min⁻¹ V-belt size: SPB x 4500 mm Number of belts: 4 Run-down time at max. speed: 90 s Engine: Power: 22 kW Type: B3 Speed: 1 500 min⁻¹ Voltage: 400/690 V Hydraulic clutch: Type: 0-123-010-80-001-846 Working pressure: 60 bar Hydraulic unit power: 2.2 kW

Condition: excellent (used), Year of construction: 2019, operating hours: 834 h, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,150 mm, Lifting capacity: 1.200 kg Technical condition: very good Bwodpfx Aboxp Azaszow Visual appearance: very good Serial number: 91128871 Please contact PEDRO GÓMEZ for more information

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 91207576A, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, torque: 45 Nm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 2,700 mm, total width: 3,000 mm, table width: 520 mm, table length: 770 mm, table load: 455 kg, rotational speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, overall weight: 3,300 kg, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, number of spindles: 2, number of slots in tool magazine: 21, tool diameter: 160 mm, tool weight: 680 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The CINCINNATI ARROW 750 CNC machining center was manufactured in 1995. And in England . Distributed by the Polish company MTI from Rybnik(documentation) Bwsdpfxsugn Eds Abzjw - CNC control: FANUC-OMC - number of axes: 4 - feed in X/Y/Z axis: 762x510x510 mm - working table area (L x W): 950 x 520 mm - maximum workpiece weight: 350 kg - maximum spindle speed: 6000 rpm - spindle power: 5.5 kW - 21-position tool head - tool holder: SK40 - maximum tool weight: 6.8 kg - number of T-slots: 3 -positioning accuracy +/- 4 microns -repeatability +/- 1 micron - connection power: 15.5 kW -maximum current at full load :24A -net weight :3300kg -maximum height from the ground : 2.8m -total area occupied : 2,7m(width) x 3,0m(depth) - data transmission : RS232 + LAN(TRANSMISSION ON THE NETWORK) - rotary table smoothly controlled (4 axis) model NC10B -Renishaw MP12 measuring probe (attached to the tool magazine) The machine is in excellent condition, connected to the power supply can be tested, the machine without failure (it has a Fanuc system - it has never broken down for us!) We sell because we bought a new one also on the FANUC system.

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Bwjdpfxst H Nbuj Abzjw Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: used, Year of construction: 1986, Manufacturer : OLSA Bsdpewxzbtjfx Abzjww Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 – 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm – lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Bwjdpfx Aok Abcrebzjw The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2179, The Diskus DDS 750 XRE is a double-sided surface grinding machine from Diskus's DDS series, designed for precision flat and plunge grinding. Although the exact year of manufacture (2012) is not specified, the technical data for the XRE variant are as follows: Technical Data of the Diskus DDS 750 XRE * Grinding wheel diameter: 750 mm * Maximum workpiece diameter: * Through-feed grinding: 420 mm * Plunge-cut grinding: 300 mm * Grinding width: * Through-feed grinding: up to 180 mm * Plunge-cut grinding: up to 300 mm * Maximum material thickness: * Through-feed grinding: 30 mm * Plunge-cut grinding: 80 mm * Grinding spindle drive power: * Spindle 1: 48 kW * Spindle 2: 48 kW * Feed system: rotary feed * Feed rates: * Maximum: 20 mm/min * Minimum: 240 mm/min * Dimensions: Bwjdswnrv Tjpfx Abzew * Required floor space (L × W): 4900 mm × 5000 mm * Total height: 3100 mm * Weight: approx. 13,000 kg * Control system: Siemens 840 D CNC * Measuring control: Diskus IONIC 17A This machine is particularly suitable for machining workpieces made from corundum, CBN, or diamond and is used in sectors such as the automotive industry, gearbox manufacturing, hydraulics and pump technology, as well as the bearing industry. For further information or specific inquiries regarding the year of manufacture 2012, I recommend contacting Diskus Werke Schleiftechnik GmbH directly.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,782 h, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,100 mm, Lifting capacity: 1.000 kg Technical condition: very good Bodpfx Abjxp Ay Nezsww Visual appearance: very good Serial number: 91073762 Please contact PEDRO GÓMEZ for more information

Condition: used, mileage: 88,307 km, power: 81 kW (110.13 HP), first registration: 11/2012, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, loading space width: 1,950 mm, loading space length: 3,240 mm, loading space height: 1,950 mm, Year of construction: 2012, Equipment: ABS, air conditioning, tail-lift, = Additional options and accessories = Bwsdpfxjxm Sy Te Abzjw - Tailgate = More information = Front axle: Steering Rear axle: Double wheels Tail lift: D`Hollandia, tail lift, 750 kg Serial number: ZCFC357170F484238

Condition: good (used), Ecoca MT-312/750 CNC Lathe FANUC 21iTB, 12″ Chuck, 2006 Year: 2006 Control: FANUC 21iTB Chuck Size: 12″ (305 mm) – 3-Jaw Bsdpfoxpnl Dox Abzjww Swing Over Bed: 600 mm Swing Over Cross Slide: 330 mm Max Turning Diameter: Over Bed: 450 mm (17.7″) Over Cross Slide: 330 mm (12.99″) Z-Axis Travel (Turning Length): 730 mm (28.74″) Spindle Power: 24.8 HP (18.5 kW) Spindle Speed: Up to 3,200 RPM Tool Turret: 12-station Tailstock: Included Tool Arm: Included

Year of construction: 1998, condition: used, Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm Bedsvly D Uspfx Abzeww   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Condition: used, Year of construction: 1999, Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec Bodpfx Aok Aa E Rebzjww without supports without Guide other conveyor speed frequency converter .. Please ask if needed Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2013, operating hours: 3,114 h, lifting height: 9,020 mm, fuel type: electric, mast type: triplex, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,200 mm, Lifting capacity: 1.400 kg Technical condition: very good Visual appearance: very good Bwedpoxpd Tqefx Abzow Serial number: 91086805 Please contact PEDRO GÓMEZ for more information

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Bodpfek Aa T Rox Abzjww Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm Bwsdpfok Aba Tox Abzow belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1992, Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Bwodpfortalnsx Abzow Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 20520-750-600 RA2276 Bsdpfxsrupuxj Abzjww Technical data: Conveyor length (NL): 20520 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Bedpfx Abek Aa T Hjzeww Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 15320-750-600 RA2126 Technical data: Conveyor length (NL): 15320 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Bwsdpfx Asrudb Aebzjw Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 15980-750-600 RA2134 Technical data: Conveyor length (NL): 15980 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Bwsdpfx Aerudb Robzew With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 1465-750-600 RA2130 Technical data: Conveyor length (NL): 1465 mm frame width (NB): 750 mm Bwjdpfx Aerudb Uebzew belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R17 DR63L4/TH Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 28100-750-600 RA2142 Technical data: Conveyor length (NL): 28100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Bwjdpfsrupu Rox Abzew For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 19100-750-600 RA2247 Technical data: Conveyor length (NL): 19100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Bwjdperknt Dsfx Abzew Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 7920-750-600 RA2253 Technical data: Bwsdorrxcvjpfx Abzjw Conveyor length (NL): 7920 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik