Used Edalmatic Tapping for sale (1,009)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Köln
7,000 km
Flame-cutting machine
MicroStepMG 12501.35 Prk MGc + 1.35 BkGG
Call
Condition: used, Year of construction: 2021, machine/vehicle number: 0602-260048, MicroStep Gantry System MG 12501.35PrkMGc+1.35BkGG with two machine gantries
The MicroStep MG series is a CNC-controlled, highly precise oxy-fuel/plasma sheet metal cutting system with a drilling unit and a pin marking unit in a dual-gantry design.
The gantry cutting system is designed for performance and load capacity. Sheet metal with dimensions of 12,000 mm in length, 3,000 mm in width, and 200 mm in thickness can be processed.
The high dynamics of the system result from a low-set machine gantry, digital AC servo motors, and linear guides with helical rack and pinion drives.
The integrated BEUTING belt conveyor table under the sheet metal support in the water basin ensures continuous slag removal.
Working area per gantry: approx. 12,000 × 3,000 mm
Positioning speed up to 40 m/min
Positioning accuracy ≤ 0.06 mm/m
Repeatability 0.05 mm/m
Servo drives with linear guides and rack and pinion drive
Machine gantry 1 equipment:
Plasma rotator for 3D bevel cuts and weld preparation
Kjellberg HiFocus 360i neo plasma source (10–360 A)
Automatic gas console
Fully automatic oxy-fuel torch with collision protection
Pin marking system "MicroPunch"
CCD camera for hole detection and contour adjustment [Description | PDF]
Machine gantry 2 equipment:
Fully automatic drilling spindle MG-40-P26
Drilling up to Ø 40 mm
Tapping up to M30
Tool magazine for 8 tools
Two fully automatic oxy-fuel torches with collision protection
Control and Software
Itedj Akwqijpfx Abwop
The system features the MicroStep iMSNC® control system with:
24" touchscreen
User management
Expert system for automatic parameter generation
Management of cutting programs (MRP)
Machine and production reports
EcoInfo for cost and time calculation
Remote diagnostics and TeamViewer remote maintenance [Description | PDF]
Cutting table and extraction
BEUTING belt conveyor table GFT500 2IAK
Over the full 12.6 m cutting length
Automatic slag removal via conveyor belt
Segmented extraction
Water tank as a spark pre-separator [Description | PDF]
BEUTING cartridge filter system PFM5-10
9,300 m³/h extraction capacity
10 filter cartridges
Dust class M
Separation rate 99.99%
Special technologies of the MG series
PowerHole® for precise hole quality
Adaptive height control
ACTG® automatic calibration of the bevel cutting head
Smart Z movement for higher productivity
Automatic central lubrication
SMS fault message (infoMessage®)
System safety
Light curtains on both gantries
Emergency stop systems
Collision protection
Distance sensor between the two gantries
Tactile shutdown devices on the guide rails
Success:
Your message has been sent.
Listing
Tarnów Grodkowski
6,269 km
MTX 2030 plasma plotter
Martex CncMTX 2030
Call
Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2030
Construction: steel+aluminum
Working field: 3000/2000/200
XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips
Z axis drive: stepper motor ball screw
Travel speed: up to 25m/min
Z axis control system: THC My plasm system
Linear guides: HIWIN
IGUS guideway
Automatic material detection system
Power supply: 240V
Permissible load: 2000kg
Total weight: 800kg net
USB port for opening projects and transferring files using external pen-drives
Sheet metal detection system
THC cutting height control system
Hiwin wire guides
Double-sided gate drive:
X-axis stepper motor and gear rails
Y axis stepper motor and toothed rails
Z axis stepper motor and ball screw
Drives realized with Hiwin brand rails
Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining)
INCLUDED:
-water table
-interchangeable grate
-control software in Polish
-Declaration of Conformity CE
- DTR
- warranty.
Itedpfxenfu Tlo Abwsp
-start-up and training included in the price
The latest control system available in our plotters:
Integrated THC height controller
Anti-diving torch function
Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap)
Integrated CAM module: MyMini CAM -.
Automatic object recognition Ven. External.
Path analysis in advance
Cutting parameter database
Correction of design angle to material
Ability to cut from any point
Possibility of cutting from the end
DXF,PLT import
Automatic generation of paths with offsets, entries and exits
The program can be used with an external CAM program
Separate speed for holes
Parameter database
Project correction to material angle
Soft and Hardware limits
THC anti-diving functions
Game pad control capability
Material detection by touch system, floating head
WHY IT'S WORKING
WE ARE POLISH MANUFACTURER OF PLASMA BURNERS
CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC)
PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING
COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY
OUR STRENGTHS
HIGH CLASS SHIELDED CABLES
INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING
ADVANCED THC MY PLASM SMOOTH BURNER OPERATION
CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES
WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS
WE ASSIST IN ARRANGING LEASES
It is possible to select the appropriate cutting machine to individual needs of the company.
We offer other dimensions of tables.
Success:
Your message has been sent.
Listing
Germany
6,627 km
Bed Type Milling Machine - Universal
Erste Maschinenfabrik AuerbachFBE 1500
Call
Condition: used, Year of construction: 2004, Technical details:
x-travel: 1500 mm
y-travel: 1000 mm
z-travel: 1000 mm
control for program: TNC 530
spindle hours: noch nicht bekannt h
milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min
tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A)
max. torque on the spindle: 1000 Nm
spindle head swivable left - right: 90 °
feed: 1 - 6000 mm/min
feed power: 30 kN kN
rapid traverse: 15 m/min
Number of tools: 1 St.
table clamping surface LxW: 1600 x 800 mm
table load: 40 kN kN
voltage: 400 V / 50 HZ V
total power requirement: 42 kW
Weight approx.: 15,2 t
compressed air: 6,3 bar
Iodpfou Nc Risx Abwjtp
dimension machine xH: 3,1 x 4,7 x 2,6 m
dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm
space requirements approx. LxWxH: ca. 38,5 m² m²
Applications:
Milling, drilling; tapping, boring.
with direct coded length measuring systems
the guideways of the 3 axes are on flat guideways
CTS and external cooling
Milling head position controlled +/-90°
milling spindle nominal drive power 22 kW
with integrated hydraulic power unit up to 100bar operating pressure
with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun
Hinged belt chip conveyor DGS, type SSF 600 P50
Accessories:
Measuring probe SK40
Reference tool SK40
Milling head SEMPUCO
*

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Silvi
6,448 km
3-axis CNC machining centre for Alu/PVC
EmmegiPhantomatic
Call
Condition: used, EMMEGI PHANTOMATIC 3-Axis CNC Machining Centre
The EMMEGI PHANTOMATIC is a vertical 3-axis CNC machining centre designed for programmable machining operations on aluminium, PVC and steel profiles. Steel profiles can be processed up to a maximum thickness of 3 mm.
The machine is suitable for milling, drilling, tapping and through-machining operations. It is equipped with a 5.5 kW electrospindle, reaching a maximum speed of 18,000 rpm, with an ISO 30 tool holder and manual tool change.
The machine is operated through a CNC/PC control system with Cam-Editor-Drill software. It features four standard manually positioned clamps and two stops. Thanks to the workpiece repositioning function, it can process profiles with a maximum length of 4,800 or 6,800 mm, depending on the machine version.
Main technical specifications:
X-axis travel: 2,400 mm
Y-axis travel: 240 mm
Z-axis travel: 230 mm
Maximum X- and Y-axis speed: 20 m/min
Maximum Z-axis speed: 14.6 m/min
X-, Y- and Z-axis acceleration: 1.66 m/s²
Tool change: manual
Maximum milling tool diameter: 50 mm
Maximum tapping capacity: M8
Standard clamps: 4
Stops: 2
Electrospindle power: 5.5 kW
Maximum electrospindle speed: 18,000 rpm
Tool holder: ISO 30
Installed electrical power: 7 kW
Power supply: 380 V
Operating pressure: 6–8 bar
Air consumption: 50 Nl/min
Maximum working length with repositioning: 4,800 mm
Itedoz Aqmwepfx Abwjp
Maximum working width: 240 mm
Maximum working height: 230 mm
Dimensions: 2,800 × 1,150 × 1,850 mm
Weight: 600 kg
Success:
Your message has been sent.
Listing
Austria
6,310 km
Magnet-Drilling-Machine
PROMOTECHPRO-52T
Call
Condition: new, neu
ca. 2 - 4 Wochen ab Auftr
Polen
1595 €
23 mm
Itedpfsyrht Ijx Abwjp
19 mm Weldon
1.6 kW
M20
266 mm
259 mm
500 mm
17 kg
23 mm
50 mm
75 mm
190 mm
160 - 250 / 390 - 580 U/min
8 mm
The PRO-52T drilling machine is suitable for hole cutting and tapping applications.
Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”).
Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.
Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality.
Intelligent speed control system maintains constant motor speed regardless of changing loads.
Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.
Features and benefits:
• powerful motor with heavy duty 2-speed gearbox
• Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes
• tapping of through and blind holes
• milling with TCT or HSS cutters or drilling
• electronic clutch
• both overload and overheat protection
• rigid design extends tool life
• tilt sensor stops the motor if machine breaks away
• 360-degree visual monitoring system indicates current condition of the drill
and gives safety and diagnostic information e.g. worn brushes
• innovative smart magnet with reduced weight
• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials
• Energy Saving Base (ESB) uses only 50% of its power when motor is not running
• Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings
without any expert knowledge or experience
• intuitive control panel at top of the drill
• large coolant container
Standard shipping set:
• Drilling machine
• Plastic box
• Handle (3 pcs)
• MT2 arbor with 19 mm (3/4”)Weldon tool holder
• Safety strap
• Cooling system
• Protective spring for cooling hose
• MT2 drift
• 6 mm hex wrench
• 5 mm hex wrench with a handle
• 2.5 mm hex wrench
• 8 mm combination wrench
• Tool can
• Operator’s Manual
OPTIONS (PRICES ON REQUEST):
Pressure cooling system 2 lt
Vacuumpad
Compressed air ecjector
Pipe attachement
Success:
Your message has been sent.
Listing
Dewsbury
7,573 km
Vertical machining center
HAASTM2
Call
Condition: excellent (used), Year of construction: 2007, Haas TM 2
TRAVELS
X 1016MM
Y 406 MM
Z 406MM
Itodpfxsyftdfs Abwep
Rigid tapping
Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines.
We find the TM2 to be a very capable machine with market leading reliability.
The machine uses Industry standard BT40 tooling.
The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles.
The control interfaces well with CAD-CAM,we will help with setup if required.
This machine would make an ideal entry level machine but at the same time is great for quantity production
of precision cnc machined parts
The machine has been checked by qualified engineers and is ready for work.
We use the machine for occasional toolmaking so we can demonstrate if required.
Success:
Your message has been sent.
Listing
Zuchwil
6,964 km
Turning automatic lathe
CitizenCincom M32-4M5
Call
Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32
Manufacturer: Citizen Machinery Co. Ltd
Model: M32-4M5
Year of manufacture: 2014
Country of origin: Japan
Machine weight: 3,550 kg
Maximum machining diameter: 32 mm
Max. machining length: 320 mm with one chuck
Main spindle speed: 200–8,000 rpm
Main spindle indexing: 1°
C-axis resolution (spindle): 0.001°
Counter spindle speed: 200–8,000 rpm
Max. clamping diameter of counter spindle: 32 mm
Max. drilling diameter front side: 12 mm
Max. tapping diameter front side: M10
Max. tapping diameter rear side: M10
Spindle through-hole diameter: 37 mm
Number of tool positions: up to 25, depending on configuration
Rapid traverse X/Y/Z axes: up to 32 m/min
Bar length: 2,500 mm
Coolant tank capacity: 198 l
Compressed air requirement: 0.5 MPa
Iodpfx Aoydaadebwstp
Noise level: Ø580 dB(A)
Memory size: 5120 m, 2048 kB
Minimum input increment: 0.1 µm
Interface: RS232C
Number of programs: 63
Tool offsets: 32 pairs
X1 travel: 108 mm
Y1 travel: 347 mm
Z1 travel: 325 mm
X2 travel: 120 mm
Y2 travel: 44 mm
Z2 travel: 212 mm
X3 travel: 313 mm
Z3 travel: 430 mm
A3 travel: 150 mm
A4 travel: 1,500 mm
No guarantee is made for the accuracy, completeness or timeliness of the information provided.
Success:
Your message has been sent.
Listing
Contamine-sur-Arve
7,060 km
Vertical machining center
HARTFORDTGV-1612
Call
Condition: used, TECHNICAL DETAILS
- Number of axes : 3
MILLING SPINDLE
- Tool holder type : BT40
- Spindle power : 12.5 [kW]
- Spindle speeds : 15000 [rpm]
LINEAR AXES
- Travels on X/Y/Z axes : 1600 / 1200 / 700 [mm]
- Rapid traverses rates (X/Y/Z) : 30 / 30 / 30 [m/min]
- Cutting feed rates (X/Y/Z) : 20 / 20 / 20 [m/min]
Itodps Ahkz Refx Abwep
TOOL CHANGER
- Auto. Tool Changer type : Bras chargeur
- Tool magazine capacity : 40
TABLE
- Table dimensions : 1800 x 1300 [mm]
- Maximum weight upon table : 4000 [kg]
- Distance table / spindle nose (min./max.) : 900 [mm]
POWER SUPPLY
- Supply voltage : 400 [V]
- Total installed power : 50 [kVA]
WEIGHT & DIMENSIONS
- Machine floor space : 5.340 x 3.710 [mm]
- Machine height : 4.060 [mm]
- Machine weight : 18870 [kg]
EQUIPMENT
- CNC : Heidenhain TNC 640
- Interface : Ethernet / RS232 / USB / PCMCIA
- Interactive programming
- Electronic handwheel
- Linear scales
- Rigid tapping
- Coolant tank
* with high-pressure pump : 20 [bars]
* with paper filtering unit
- Coolant through spindle
- Chips conveyor
- Spindle cooling unit
- Tool probe : Heidenhain TT160
- Workpiece probe : Heidenhain TS460
- Electric transformer
Success:
Your message has been sent.
Listing
Kirchberg
6,784 km
Panel van
MANTGE 3.180 4x2 F SB BF3+ Begleitfahrzeug
Call
Condition: used, mileage: 74,580 km, power: 130 kW (176.75 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Front-wheel drive, start-stop system with brake energy recuperation, LED headlights, rear step, smoker's package, reversing camera, media van package, light & visibility package, digital tachograph, grab handles on the rear pillars, rear wing doors without windows, front bull bar, side wind assist, hill start assist, emergency braking assist, suspension seat (left) and swivel seat (right), seat heating, digital radio reception (DAB+), parking assist front and rear, lane change assist, ACC stop & go, traffic sign recognition system, 4 all-round lights, BF3 + escort vehicle equipment: bed + mattress, kitchen cabinets, tap, 12V water pump, canister, hanging wall cabinet, wardrobe, bench seat and two-part rotating table top, sink with glass cover, refrigerator, windows on the driver and passenger side (450x800 mm), roof window (400x400 mm), 2x 230V socket, 2x USB socket, 2x light switch, LED lighting, voltage converter 12V/230V 2000/1300W, switch for voltage converter.
Iodpfx Abe Ahma Sswjtp
Success:
Your message has been sent.
Listing
Ahaus
7,000 km
Pillar Drilling Machine
ALZMETALLAB 40 SV AUTO DIGIT
Call
Condition: excellent (used), Year of construction: 2005, bore capacity in steel (diameter) 40.0 / 50.0 mm
throat 300 mm
bore stroke 160 mm
threading M 30 in ST
turning speeds 70.0 - 4.000 U/min
table: 615 x 430 mm
bore spindles - Morse Taper 4 Kurzspindel MK
column diameter 145 mm
feed 0.1-0.2-0.3-0.4 mm/U
distance spindle /table 147 / 688 mm
T-slots 2 x 14 x 224 mm
engine output 1.8 / 2.9 kW
weight 450 kg
Machine height 1865 mm
Current new price approx. 22.000 euros
Special price upon request
In well-maintained condition (!!)
Features:
- Robust pillar drilling machine - INDUSTRIAL GRADE -
* Drive: V-belt - VARIO (variable speed) -
Iedpfxo Afp A Hs Abwetp
- Automatic spindle feed
* With electromagnetic feed clutch
* 4 feed rates: 0.1, 0.2, 0.3, 0.4 mm/rev
* Feed overload protection
- Infinitely variable speed adjustment
* Digital speed display
- Tapping (thread-cutting) function
- Emergency stop button (front-mounted)
- Main power switch (front-mounted)
- Original operating manual
Included special accessories:
- Adjustable machine work light
- Tapping attachment with footswitch
- Automatic drilling depth control
* Includes: drilling depth programming, chip-breaking function,
. retract/clearance function (adjustable via digital potentiometer)
. digital display (including drilling depth readout)
- Fine adjustment for drilling depth and fixed stop
* Setting increment: 0.1 mm
- 4x anti-vibration machine mounts
Success:
Your message has been sent.
Listing
Tarnowo Podgórne
6,350 km
Gluing Machine
NEW DGM Technofold with GYRO 90Technofold 1200
Call
Condition: new, Year of construction: 2026, operating hours: 40 h, functionality: fully functional, machine/vehicle number: Technofold, infeed width: 1,200 mm, Offer of the Technofold 1200 SL with Gyro
Ljbmsw Ec D Ao S Ngtheru
Specification:
Machine speed: 400 m/min
Step speed: 20 m/min
Packaging width: 160-1200 mm
Itjdpfx Abj Afbw Nowsp
Machine dimensions: 22x1.88x1.5 m
Machine weight: 9.2t
Max power consumption: 26 kW
Air demand: 6 bar/ max 10m3/h
Machine equipment:
4-6 point machine
Gyro - rotating packages by 90
Side equation section - left/right
Pre-breaking section
Automatic bottom section
Servomotors, 4/6-point rear bending system
Lower circular gluer left/right
KQ cold glue system with 4 guns
Final crimping and closing section
Broadcast section
Ironing section with independent drive
Pneumatic insertion rollers with SQUARING 2 alignment
Tapping block - SPANKER
vacuum on the feeder + vibrator
Camera with monitor on display
Success:
Your message has been sent.
Listing
Radom
6,026 km
Paper cutting machine
Ideal 5222 DigicutHydraulic Guillotine
Call
Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine
The machine is 100% functional and has been serviced.
This model has the most extensive equipment.
The machine was purchased from a government office.
Technical specifications:
Working width: 520mm
Stack height: 80mm
Itjdpfxsz Rk Nte Abwsp
Minimum remnant: 22mm
Maximum distance from the saddle to the knife: 520mm
230V power supply
Key features:
The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N
Electromechanical knife and saddle drive
Automatic pressure synchronized with the knife’s cutting movement
Electronically controlled saddle adjustment knob with adjustable speed
Side tables
Photocells
„SCS” safety system, including:
Electronically controlled two-handed cutting start
Automatic knife return from any position
Transparent cover on the rear table
Laser cutting indicator
Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.
Success:
Your message has been sent.
Listing
Bydgoszcz
6,279 km
KOVOSVIT VO 63 Radial Drilling Machine
Kovosvit MASVO 63
Call
Condition: used, functionality: fully functional, KOVOSVIT VO 63 Radial Drilling Machine – Drilling Capacity 80/100 mm
For sale: used KOVOSVIT VO 63 radial drilling machine, manufactured in the former Czechoslovakia.
Heavy-duty industrial radial drill designed for drilling, boring, countersinking and tapping operations on large and heavy metal workpieces.
The machine features a height-adjustable and swivelling radial arm, a horizontally movable drilling head and a heavy-duty base plate with T-slots.
Technical specifications:
- Manufacturer: KOVOSVIT Holoubkov
- Model: VO 63
- Max. drilling capacity in steel / cast iron (solid drilling): 80 / 100 mm
- Max. tapping capacity in steel / cast iron: M85
- Max. spindle nose diameter: 100 mm
- Spindle travel: 380 mm
- Spindle taper: Morse MT6
- Number of spindle speeds: 16
- Spindle speed range: 11.2–2,000 rpm
- Number of spindle feeds: 16
- Spindle feed range: 0.035–2.8 mm/rev
- Spindle reach min./max.: 386–2,000 mm
- Distance from spindle to base working surface min./max.: 473–1,803 mm
- Base working surface: 1,100 × 2,300 mm
- Number of T-slots: 3
Iedpfjz Rpadjx Abwjtp
- T-slot width: 22 mm
- Distance between T-slots: 250 mm
- Main motor power: 7.5 kW
- Power supply: 3 × 380 V / 50 Hz
- Connected power: 10 kVA
Dimensions and weight:
- Length: 3,700 mm
- Width: 1,380 mm
- Height: 4,050 mm
- Machine weight: 7,100 kg
Equipment and features:
- Height-adjustable and swivelling radial arm
- Horizontally adjustable drilling head
- Mechanical spindle speed and feed selection
- Mechanical spindle feed
- Heavy-duty base plate with T-slots
- Conventional control
Machine condition:
Used machine in the visual condition shown in the attached photographs. Normal signs of age and previous use, including paint wear and areas of superficial corrosion.
Further information available upon request.
Success:
Your message has been sent.
Listing
Cloppenburg
6,932 km
2006 Schneeberger Norma CFG
SchneebergerNorma CFG
Call
Condition: used, Year of construction: 2006, Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader,
Quinto software, version 4.3b,
Software for cylindrical cutters,
Software for conical cutters,
Software for hemispherical conical cutters,
Software for two-flute cutters,
Software for three-flute cutters,
Software for hob cutters,
Software for up-and-down cutters,
Software for wood drills,
Software for tools with an axial angle,
Software for taps,
Software for step drills,
Software for drills, types H and S,
ISO axial software,
ISO spiral software,
Elbaron electrostatic mist extractor,
Hydraulic workpiece clamping,
Renishaw measuring probe,
Automatic fire-extinguishing system,
Automatic centralized lubrication system,
Glass scales on the linear axes,
1 loading pallet,
16 grinding wheel flanges,
4 collets,
1 collet chuck,
1 automatic 5-jaw chuck, PMH.
X-axis longitudinal movement: 380mm
Iedsz Rpnhspfx Abwjtp
Y-axis transverse movement: 280 mm
Z-axis vertical movement: 280 mm
C-axis swivel range: 340°
A-axis rotation range: 360 °
Center height: 210 mm
Workpiece holder: ISO 50
Grinding wheel diameter: Max. 200 mm
Drive power grinding lockers: 7,5 kW
Grinding spindle speed: stepless 0 - 9000 rpm
Connected load: 29 kW (400 V / 50 Hz)
Dimensions W x D x H: 1590 x 1930 x 2550 mm
mass: approx. 4800 kg
colour: turquoise / grey
Success:
Your message has been sent.
Listing
Laarne
7,218 km
Vertical machining center
MakinoD200Z
Call
Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z
Makino Professional 6 (FANUC FS31i-B)
Professional 6 Version
X-axis 350 mm
Y-axis 300 mm
Z-axis 250 mm
B-axis (swivel range) 180° (0° – 180°)
C-axis (rotation angle) 360° continuous
Isdpfx Abo Ah D Twjwstp
Distance table surface – spindle center 160 – 410 mm
Table Max. load capacity 75 kg
Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions)
Chuck EROWA
Speed range 100 – 30,000 min⁻¹
Drive power (25 % ED / continuous) 15 kW / 11 kW
Torque (25 % ED / continuous) 23.8 Nm / 21 Nm
Interface HSK-E50
Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm
Repeatability X/Y/Z ± 0.0010 mm
Positioning accuracy B/C-axis ± 2.0 s
Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s
Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C.
Capacity 20 tools
Max. tool weight 3 kg
Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions)
Max. tool length 200 mm
Interface HSK-E50
Connected load 40 kVA
Compressed air
5 – 8 bar, max. 500 l/min
2,300 × 1,868 × 3,030 mm 4,600 kg
Spindle with 30,000 rpm, HSK-E50 interface
Rigid tapping
Table with EROWA / System 3R chuck (DD motor), high-precision bearings
Linear scales (X, Y, Z)
Tool changer with 20 pockets (ATC 20), HSK interface
Collision Safeguard (CSG)
Robot door, loader interface (A-type)
Chip conveyor with drum filter and downstream cyclone filter
Flushing channel, air blower, coolant nozzles at spindle nose
Fully enclosed work area, safety-guarded operator door
Portable hand pendant
Super GI.5 control, High-speed smooth TCP, GI-Smoothing
Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining
3-dimensional cutter compensation, tilted working plane
Dynamic fixture compensation for rotary table, VP control
Adaptive control (AC Control), energy saving function
2 GB part program memory, Data Center 1 GB, 1,000 programs
Tool compensation memory: 400 offsets, type C
54 workpiece coordinate systems (6 + 48)
User macro programming with 1,100 variables
MRDF sensor (Machine Relocation Detection Function)
EROWA Power Chuck
Loader interface (A-type) instead of (L-type)
Coolant temperature control unit (constant coolant temperature, with heating)
Workpiece wash gun (operator side)
Coolant shower
Connection for oil mist extraction (Ø 125 mm)
Air dryer
Tool length measurement by BLUM laser, incl. tool breakage detection
3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point)
i-Set-up (additional operator panel for easy workpiece alignment)
MML interface (fast Ethernet card)
Network integration
Remote diagnostics setup (VNC/EDM viewer, installation and training)
OPC UA interface for Professional 6 (35 readable tags)
Tool retract and re-approach function
3D model of the working area
Success:
Your message has been sent.
Listing
Freising
6,652 km
Microbrewery
Diverse
Call
Condition: used, Year of construction: 2018, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of ...
Isdpfxe Ahxytj Abwstp
Success:
Your message has been sent.
Listing
Düsseldorf
7,012 km
CNC lathe
DMG MORINZX2000/800SY
Call
Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017
CNC controller: Fanuc FS31iB (MAPPS IVS)
Isdpfx Abs Ah Iq Rswotp
Capacity
Turning length mm: 800
Max. turning diameter mm: ø 320
Bar work capacity mm: 65
Upper turret
X-axis travel mm: 210
Y-axis travel mm: 110
Z-axis travel mm: 810
Number of tool slots St .: 16
Speed driven tools RPM: 6000
Lower turret
X-axis travel mm: 210
Z-axis travel mm: 810
Number of tool slots St .: 16
Speed driven tools RPM: 6000
Main spindle
Speed spindle rpm: 5000
Drive power spindle kW: 25/22
Spindle bore mm: 73
Chuck type: 8"
Manufacturer: KITAGAWA
Counter spindle
Speed spindle rpm: 5000
Drive power spindle kW: 25/22
Spindle bore mm: 73
Chuck type: 8"
Manufacturer: KITAGAWA
Coolant system
High-pressure bar: 10
Equipment
Chip conveyor
Mist collector
Chuck foot switch (double) for main and counter spindle
Program restart
Synchronized tapping
Paper band filter
Automatic door
Robot
Automation interface
Messenger V4
Working time hours
Under power: 7349
Spindle 1: 1370
Rated power kVA: 94
Basic machine dimensions / weight
Weight kg: 8800
Success:
Your message has been sent.
Listing
Germany
6,946 km
DONAU Danumeric 440
DONAUDanumeric 440
Call
Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 5,500 W, number of axes: 4, Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details.
- Drilling Capacity in Solid Steel (St 60): 40 mm dia.- Drilling Capacity in Cast Iron (GG 22): 50 mm dia.- Tapping Capacity (Steel St 60): M 36- Tapping Capacity (Cast Iron GG 22): M 45- Tool Taper: SK 40 (DIN 69871, Form A)- Spindle Speed Range: 15 – 2,800 rpm (infinitely variable)- Spindle Motor (AC, frequency-controlled): 5.5 kW- Spindle Torque: max. 250 Nm (constant from 15 to 200 rpm)- Gearbox: 2-step automatically shifting (i_max 1:7)- Quill Feed (Z-Axis): 5 – 2,000 mm/min (infinitely variable)- Quill Travel / Stroke (Z-Axis): 200 mm- Quill Feed Force / Pressure: 12,000 N- Column Elevation / Hub (W-Axis): 410 mm- Column Diameter: 195 mm- Radial Arm Travel: 750 mm- Drilling Radius: min. 540 mm / max. 1,290 mm- Standard Work Table Dimensions: 600 x 1,200 mm (with 4 T-slots 18 mm, pitch 125 mm)- Table Height: 900 mm- Distance Spindle Nose to Table: 95 – 705 mm- Distance Spindle Nose to Floor: 995 – 1,605 mm- Maximum Workpiece Dimensions: L 2,950 mm x W 1,050 mm x H 1,350 mm- Rapid Traverse (X / Y Axis): 7.5 m/min- Rapid Traverse (Z-Axis): 5.0 m/min- Rapid Traverse (W-Axis): 3.0 m/min- Positioning Accuracy (X, Y): ± 0.075 mm- Repeatability (X, Y): ± 0.030 mm- Positioning Accuracy (Z, W): ± 0.05 mm- Repeatability (Z, W): ± 0.03 mm- Control System: 32-Bit CPU CNC Control (4 axes: X, Y, Z, W)- Screen: 9" Electroluminescent Display (EL, illuminated)- Program Memory: 2,000 NC blocks- Interfaces: V.24 / RS-232-C- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 13.0 kVA- Machine Weight: approx. 2,610 kg (with 600 x 1,200 mm table)
Itodpfxe Agm Iaj Abwsp
Technical Specification
Taper Size SK 40
Success:
Your message has been sent.
Listing
Germany
6,627 km
Pillar Drilling Machine
ALZMETALLAlzstar 40 SV
Call
Condition: used, Year of construction: 2008, Technical details:
bore capacity in steel (diameter): 40 mm
throat: 293 mm
Itedpfo Afhqisx Abwjp
bore stroke: 120 mm
thread cutting up to max.: Stahl M24
thread cutting up to max.: Guss M30
drill capacity in cast iron: 45 mm
spindle taper MT: MK3
spindle speed:: 160-2250 Stepless U/min
feed: 0,10 +0,20 automatic mm/U
Distance spindle/table max.: 117/701 mm
table clamping surface:: 514 x 360 mm
column diameter: 115 mm
total power requirement: 1,9 kW
weight of the machine ca.: 285 kg
dimension machine approx.LxWxH: 0,7 x 1,8 x 1,8 m
- Infinitely variable spindle speed adjustment
- Digital spindle speed display
- Automatic quill feed
- Feed lever for engaging and disengaging the automatic feed
- Adjustable feed rate
- Adjustable drilling depth
- Clockwise and counterclockwise rotation for thread tapping
- Latching emergency stop mushroom push button
- Motor protection switch
- Electrically interlocked spindle guard
- Height-adjustable drilling table with table clamping and 360° rotation
- Protection class IP54
*
Success:
Your message has been sent.
Listing
Hungary
6,946 km
Citizen B16
CitizenB16
Call
Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details.
Machining capacity
• Maximum machining diameter: Ø16 mm
• Maximum machining length: 135 mm
• Main spindle through-hole diameter: Ø20 mm
• Maximum front drilling diameter: Ø6 mm
• Maximum front tapping: M6Travels
• A2/back-spindle axis travel: 200 mmRapid feeds
• X-axis: 21 m/min
• Y-axis: 21 m/min
• Z-axis: 15 m/min
• A2-axis: 15 m/minMain spindle
• Speed range: 200–10,000 rpm
• Maximum speed with rotary guide bushing: 8,000 rpm
• Motor: 2.2 / 3.7 kWCounter spindle (back spindle)
• Maximum chucking diameter: Ø16 mm
• Speed range: 100–6,000 rpm
• Maximum drilling diameter: Ø5 mm
• Maximum tapping: M3
• Motor power: 1.0 kWDriven tooling
• Maximum drilling diameter: Ø5 mm
• Maximum tapping: M4
• Tool spindle speed: 100–4,500 rpm
• Drive motor: 0.5 kWTooling
• Total mountable tools: 15
• Cutting tools: 5
• Secondary machining tools: 2
• Front drilling tools: 4
• Back drilling tools: 4General
• Input power capacity: 5.2 kVAUnits available and hours
• Unit 1
• Manufacture date: 05/2013
Itjdpfo Afxqqsx Abwop
• Power On: approx. 82,600 h
• Run Time: approx. 31,847 h
• Cutting Time: approx. 22,613 h
• Unit 2
• Manufacture date: 06/2013
• Power On: approx. 81,474 h
• Run Time: approx. 31,403 h
• Cutting Time: approx. 20,127 h
Additional equipment
• Bar feeder: FMB Minimag 20 / 3200 C
• Unit 1 bar feeder year: 2014
• Unit 2 bar feeder year: 2013
Technical Specification
Counter Spindle Yes
Driven Tools Yes
Success:
Your message has been sent.
Listing
Austria
6,310 km
Drilling Machine
ERLOA 40
Call
Condition: new, neu
ca. 8 Wochen ab Auftragse
Spanien
16960 €
325.63 €
40 mm
MK 4
360 mm
61 - 1.169 (9) U/min
2.2 kW
Itjdpfx Abowiq Htswjp
M33
550 mm
950 mm
2363 mm
610 kg
0,1 / 0,2 / 0,3 / 0,4 mm/U
200 mm
175 mm
35 - 835 mm
1240 mm
550 x 550 mm
950 x 550 mm
ERLO(MADE IN SPAIN)
FOR MANUFACTURING USE
automatic feed
gear drive
fixed machine table
tiltable turntable
front wheel for sensitive fine feed
coolant equipment
lighting
OPTION (PRICE ON REQUEST):
Manual tapping system
ALTERNATIVE:
ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Austria
6,310 km
Drilling Machine
ERLOGP.50
Call
Condition: new, neu
ca. 8 Wochen ab Auftragse
Spanien
12570 €
241.34 €
50 mm
MK 4
350 mm
93 - 152 - 204 - 298 - 44 U/min
3 kW
M35
480 mm
755 mm
2265 mm
435 kg
0,1 / 0,18 / 0,24 mm/U
180 mm
150 mm
ERLO (MADE IN SPAIN)
FOR DEMANDING WORKSHOP USE
Gear drive
3 aut. feeds
sliding machine table
solid drill head
tiltable turntable
front wheel for sensitive fine feed
Itedpfx Ajwiq Hyjbwop
(sample photo)
OPTIONS (PRICES ON REQUEST):
lighting equipment L
coolant equipment and machine base with T-slots ERB
Reverse for tapping IR/RS
Success:
Your message has been sent.
Listing
Austria
6,310 km
Drilling Machine
ERLOAX.40
Call
Condition: new, neu
ca. 8 Wochen ab Auftragse
Spanien
12910 €
247.87 €
40 mm
MK 4
350 mm
132-194-277-319-466-666-8 U/min
2.2 kW
M33
755 mm
480 mm
2280 mm
490 kg
0,1 - 0,2 - 0,3 mm/U
150 mm
80 - 880 mm
1225 mm
480 x 480 mm
175 mm
Automatic feed with mechanical clutch
Geared drive
Hardened and ground high quality steel gears
Speed plate and selecting levers on head front.
Depth scale and adjustable depth stop
Automatic tool ejector
Emergency STOP push button
Spindle reversing switch
Electric equipment integrated on machine’s head
Machined base with coolant tank
Worklight
MGI: Rotating and tilting table for model 40
Safety drill guard with microswitch
CE mark
ALTERNATIVE:
VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUEST
OPTIONS (PRICES ON REQUEST):
Isdpswiq Tmofx Abwstp
Electronic speed variato with speed digital reader(VE+TAK)
A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746
F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963
Depth digital reader (LBC)
Manual tapping system (IR/RS)
Manual tapping system for models with variator(IR/RS-VE)
Success:
Your message has been sent.
Listing
Austria
6,310 km
Drilling Machine
ERLOGP.32
Call
Condition: new, Year of construction: 2024, neu
2024
3984
prompt, Zwischenverkauf v
Spanien
10090 €
193.73 €
1
32 mm
MK 3
250 mm
65 - 125 - 185 - 365 - 54 U/min
M24
665 mm
640 mm
2100 mm
260 kg
Automatisch 0,10 - 0,20 - mm/U
100 mm
Ijdpowirzxjfx Abwetp
85 - 635 mm
1.170 mm
300 x 270 mm
665 x 400 mm
120 mm
ERLO (MADE IN SPAIN)
FOR DEMANDING WORKSHOP USE
geardrive machine
3 aut. feeds
left-right drilling
table with t-slots
depth adustable end
tool ejector
drill guard
CE norms
user manual in GERMAN
Incl. following optional equipment:
lighting equipment
coolant equipment and machine base with T-slots
(symbol photo)
OPTION (PRICE ON REQUEST):
reverse for tapping
Time of delivery with options: approx. 8 weeks
Success:
Your message has been sent.
Listing
Пловдив
5,573 km
Aluminum / PVC automatic cutting saw
Tronzadoras MGGAA-350-90+CNC+TR12
Call
Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium.
Tronzadoras MG - GAA-350-90+CNC+TR12
• Automatic cycle.
• 700 mm ballscrew feeder.
• OMRON controller.
• 10 programs with 30 lines.
• 20 parts in memory.
• Emergency stop.
• Adjustable feeding and cutting speeds.
Itsdpfxsvl Eahe Abwsp
• Automatic adjusted cutting length with multiple advances.
• Cut to 90º.
• Automatic air-oil cooling.
• Semi-automatic or fully automatic operation.
The machine is inspected, serviced and ready for work.
We make it easier for you to find: "edalmatic tapping"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Edalmatic Tapping (1,009)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
- Aluminium Milling Machine
- Baler Vertical
- Dmg Milltap 700
- Drilling And Tapping Machine
- Edalco Tapping
- Edging Machine
- Edm Die Sinking Machine
- Edm Drilling Machine
- Edm Machine
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month









































































































































































































































