Used Eddy Current for sale (6,971)

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm Nwodpofhmmxsfx Airon

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. Nwodpoz Slqvefx Airon The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: new, For sale: Bernard Controls DEUFRA SQ10 electric valve actuator The device is brand new, unused, from warehouse stock. Nwjdpfez Slr Hjx Airen Ideal for industrial applications, process installations, automation, and valve or damper control. Technical data: Manufacturer: Bernard Controls DEUFRA Model: SQ10 Power supply: 230 V Phase: 1-phase Power: 0.02 kW Frequency: 50 Hz Current: 0.5 A Torque: 100 Nm Speed: approx. 0.43 rpm Industrial-grade design Condition: New, unused, warehouse stock No signs of use Fully functional Additional information: The price is for one unit

Condition: new, For sale: brand new three-phase electric motor from renowned German manufacturer Motore Ehlert GmbH. The motor is factory new, kept in storage, never used. Visual and technical condition is perfect, ready for installation. Technical specifications: Manufacturer: Motore Ehlert GmbH Type: 1TZ9003 1AB53 4AB4 Z Power: 3 kW Rotational speed: 1460 rpm Voltage: 400V 50Hz Current: 6.2 A Efficiency class: IE3 Protection rating: IP55 Insulation class: F Size: 100L Mounting: IM B3 Weight: approx. 27 kg Application: Designed for industrial use, ideal for pumps, fans, production machinery, and other industrial applications. Condition: Njdpfx Aijz Slvlsrjwn New

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. Nwodpfoz Sk Hvex Airjn - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Nwjdpfxez Sli Es Airen Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: new, For sale is an electric motor from the renowned company ATB Motorentechnik GmbH, manufactured in Germany. Model CD160M-4, explosion-proof design ATEX II 2G, suitable for operation with a frequency inverter. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection class: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with a risk of gas explosion • Shaft: diameter 42 mm, multi-spline Nwjdez Slftspfx Airen

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Series: SIMOTICS Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) Nwodpfx Aisz Sl Dioron 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Nsdpfo Advcqox Airewn TECHNICAL DETAILS GENERAL DATA Manufacturer: Haulick + Roos Type: HPV28EP Machine number: 110 Machine type: Punching machine PERFORMANCE DATA Punching force: approx. 28 t Rated current: 6.7 A WORK TABLE Table dimensions: 600 × 340 mm Number of slots: 3 MACHINE DETAILS ELECTRICAL DATA Operating voltage: 380 V Control voltage: 220 V DIMENSIONS AND WEIGHT Length: 1,100 mm Width: 600 mm Height: 2,000 mm Weight: 2,000 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nedpfx Ao Adzp Noirown Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD32-540 Year of manufacture: 1983 Machine number: 282047 Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Speed: 30–400 rpm Drive power: 18 kW Ram adjustment: 0–50 mm Table dimensions: approx. 740 mm (?) Feeder Nwedpfx Ae Adzq Hoiron Feed length: 160 mm Material width: 160 mm Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schubert Type: WM0/150 Year of manufacture: 1981 Machine no.: 7.20230 Machine type: Straightening machine STRAIGHTENING RANGE Band width: approx. 150 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Nsdpo Adurwefx Airjwn Rated current: 16 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 1,000 mm Weight: 150 kg

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Nwjdpfxsvrvq De Airen Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: new, Year of construction: 2020, RegloChill RC2E 30/C – Air-cooled water chiller (Regloplas) Manufacturer: RegloChill / Regloplas Model: RC2E 30/C Serial no.: Year of manufacture: 2020 Made in: Italy Nwedpfx Aoz Rvyqeiren Cooling capacity: approx. 28 kW (to be confirmed) Refrigerant: R407C, 6.5 kg Main power supply: 400 V / 3 PE / 50 Hz Rated current: 25 A Short circuit current: 10 kA Auxiliary power supply: 110 V / 24 V Water pressure: 3.5 bar (nominal) Design pressure: 18 barg (HP) / 30 barg (LP) PED category: II Set point temperature: -10 °C to +25 °C Max. ambient temperature: +40 °C Tank volume: 200 l Fan capacity: 15,500 m³/h Dimensions (W x H x D): approx. 900 x 1680 x 1500 mm Weight: 475 kg Wiring diagram: SA 095F-00A

Year of construction: 1989, condition: excellent (used), Bobst Autoplatine 142 E Year: 1989 Max. speed: 6500 sheets/hour Max. size: 1420 x 1020 mm Min. size: 700 x 500 mm Max. force: 600 tons Stripping function Nwedpfo Aa Ivzsx Airon Currently in production Available immediately

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. Nsdpfx Ao Adyv Uoirjwn -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Condition: used, Year of construction: 2003, operating hours: 10,000 h, machine/vehicle number: PAL48, Used palettizer KEBER AXO4 700 bph General System Description The Used palettizer KEBER AXO4 700 bph delivers a robotic palletizing solution for high-volume operations in demanding industrial environments. KEBER built this model in 2003. The unit currently operates  under stable and verifiable conditions, with 10,000 recorded hours of use confirming its reliability. Moreover, the machine has shown consistent mechanical performance, which adds value to its operational lifespan. Production Capacity and Format Flexibility The Used palettizer KEBER AXO4 700 bph handles 4 to 6 cycles per minute, achieving an output of approximately 700 bottles per hour. As a result, it fits medium- to high-capacity bottling lines. The machine processes up to 20 container formats, allowing operators to switch between different product types with minimal reconfiguration. Consequently, production teams can meet varying packaging requirements without costly downtime. Nwsde Adyvuepfx Airen Robotic Handling System The palletizer uses a neck-gripping clamp system to transfer containers with precision and care. Unlike conventional palletizers, this robotic design eliminates mechanical limitations, improving adaptability across various layout configurations and container types. In addition, its gripping system maintains stability throughout the transfer cycle, reducing potential damage. Therefore, the unit ensures safe and accurate palletizing, even under continuous operation. Safety Features and Technical Documentation KEBER equipped the Used palettizer KEBER AXO4 700 bph with compliant safety protections, ensuring operator safety and adherence to current industrial standards. Importantly, the machine meets the safety requirements for CE-certified environments. The manufacturer also provides a complete set of technical manuals, enabling technicians to install, configure, and maintain the system effectively. Furthermore, these documents facilitate preventive maintenance scheduling and error diagnostics. Production Line Integration The palletizer incorporates a floor-level slip-sheet dispenser and a pallet magazine, both integrated into the frame. Thanks to this configuration, the system requires no elevated structure or platform. The unit supports 1200×800 mm and 1200×1000 mm pallet sizes, allowing users to align it with common European and international logistics platforms. As such, integration into existing layouts becomes straightforward. Automation and Process Control The automation system relies on a Siemens S7-300 PLC, which offers seamless integration into SCADA and HMI environments. Consequently, engineers can control, monitor, and adjust operations from central control systems. The unit operates on 400V / 50Hz and draws 15 kW of electrical power, ensuring compatibility with standard industrial infrastructures. Moreover, the powe...

Year of construction: 2023, condition: used, Welding System Manufacturer: TRASKO Type: CMT 1 Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 63 A Technical features: - Robotic MIG welding of individual components onto a cooling plate - Automatic torch cleaning and wire cutting - Rotary table with 2 stations for loading/unloading during the welding process In our assessment, the robotic welding system is in mint condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Nedpfx Aiszbvnfsrewn

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Nwjdpfxezq Hkne Airjn

Condition: new, Year of construction: 2026, CW-5200TH Water Chiller by S&A — Stable Cooling for CO₂ Laser Plotters The S&A CW-5200TH chiller is an industrial water cooling system designed for cooling CO₂ laser tubes in laser cutting plotters, laser engravers, and other devices requiring a stable coolant circulation system. S&A is a well-known brand in the laser cooling industry, recognized for reliable chillers, stable operation, and effective protection of CO₂ laser tubes against overheating. Nwjdpfeg Nkvrex Airen Thanks to its active cooling system, the CW-5200TH maintains coolant temperature at an appropriate level, improving laser tube safety, operational stability, and the repeatability of cutting and engraving results. Why choose the S&A CW-5200TH chiller? Stable coolant temperature control The chiller reduces the risk of laser tube overheating during extended operation and intensive workloads. CO₂ laser tube protection Proper cooling helps extend the service life of the laser tube and reduces the risk of failures caused by excessive operating temperatures. 8-liter coolant reservoir The larger tank capacity improves temperature stability and supports consistent coolant circulation. Maximum pump lift height of 12 m The built-in pump ensures efficient coolant circulation throughout the laser cooling system. Compact design The unit requires little installation space and can be easily positioned next to a laser plotter or workstation. 220–240 V power supply The chiller is designed for standard single-phase electrical supply. Applications The S&A CW-5200TH chiller is suitable for cooling: CO₂ laser cutting plotters, CO₂ laser engraving machines, water-cooled laser tubes, equipment requiring precise coolant temperature stabilization. It is particularly recommended for users who rely on laser plotters as everyday production equipment and require stable, uninterrupted operation. Technical specifications Parameter Value Model S&A CW-5200TH Device type Industrial water chiller Power supply AC 1P 220–240 V Frequency 50/60 Hz Current consumption 0.5–3.8 A Reservoir capacity 8 L Maximum flow rate 13 L/min Connections (inlet/outlet) 10 mm Rated cooling capacity 1.43 kW Refrigerant R-134a Maximum pump lift height 12 m Net weight 28 kg Dimensions (L × W × H) 580 × 290 × 470 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 4, color channels: 4, resolution (max.): 1,200 dpi, total length: 3,400 mm, total width: 5,280 mm, total height: 1,450 mm, type of input current: AC, The printer was covered by an Enhanced Service Program (ESP) through the end of 2025. The contract was not renewed because the printer was taken out of production and placed in our warehouse after a newer model was installed. The printer was retired from service due to a production upgrade, not because of any major technical issues. During our five years of ownership, the printer delivered reliable performance with no major technical problems. Maintenance was limited to routine servicing and the replacement of standard wear-and-tear components, including filters, ink tubes, and four printheads. Before being placed into storage, the printer was inspected by an EFI-certified technician, who confirmed that it was in excellent condition. The printheads currently installed in the machine are also in excellent condition, as shown in the attached photos. The white printheads were removed because white ink was no longer required for our production needs. Since white printheads require regular maintenance even when not in use, removing them was a practical decision to avoid unnecessary maintenance and operating costs. Nsdoza Rtaepfx Airswn To protect the printer during downtime, it was properly prepared for long-term storage, with storage fluid introduced into the printheads and ink system to help preserve critical components. Why this printer is worth considering: Proven reliability: Five years of ownership with no major technical issues. Verified condition: Inspected by an EFI-certified technician before storage. Well-maintained: Routine maintenance and wear-and-tear components addressed throughout ownership. Carefully preserved: The printer was prepared for long-term storage using storage fluid in the printheads and ink system. Transparent maintenance history: Clear information about the printer's service, printhead configuration, and reason for being taken out of production. This is an opportunity to acquire a well-maintained EFI printer with a documented ownership and maintenance history. Its removal from production was driven by the installation of a newer machine, making it a potential fit for a buyer looking to add printing capacity or upgrade their existing equipment.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. Nsdpfxjycfw Es Airswn After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 Nwjdpfjzi D Izjx Airen - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 - Rotating table RT Full design specifications available.

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Nsdpfou Nfttox Airown Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min * Nedpfx Aju Nkxheirown