Used Eddy Current for sale (5,676)

Condition: used, tank capacity: 32,000 l, GENERAL Design: vertical Notes: Electric heating cables around parts of the tank; manway diameter (cylinder) 600 mm; insulation with large cut-outs in insulation and insulation jacket; tank is currently fitted with transport bracing; 1 pipeline inside the tank (see photos) External diameter: 2,480 mm Internal diameter: 2,300 mm Total height: 9,150 mm Heating/Cooling: available Insulation: available Location: Bremen Technical documentation: drawing, static calculations Volume: 32,000 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 7,250 mm Last application: Chemical industry TANK Support type: legs Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manway / access port: in cylinder, in top head (DN 600) Outlet: available Note: Manway cover plated MATERIAL SPECIFICATION Foot material: steel TECHNICAL DATA / DIMENSIONS Top head wall thickness: 6 mm Lhedpfx Adsyckwwewsb

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Lhedpfx Adsycku Ajwob Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 3,640 l, GENERAL Design: suspended Speed: 194 rpm Inner diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 0.49 bar Agitator: beam agitator Location: external storage Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,640 liters Jacket volume: 132.0 liters Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,450 mm Lodoycivlepfx Adwohb Last use: chemicals VESSEL Heads: dished ends Support design: lug support HEATING / COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head Outlet: available Outlet: 25 / 80 mm AGITATOR Voltage: 380 V Current interrupter: Agitator arrangement: centrally on the top head

Condition: excellent (used), Manufacturer: REHM Type: Synergic. PRO 2 450-4 Ledpfsv Nrfxox Adwjhb Machine condition: very good used ///// Price given for 1 pc ///// Welding current setting range 45A/16V - 450A/36.5V Weight ca.130kg SMC technology - Smart Machine Control A unique regulation concept for step-adjustable devices developed by Rehm: The welding arc length is regulated not only by measuring the welding voltage and current intensity but also by digitally determining the wire feed speed. This allows for achieving excellent welding effects and makes operation easy and safe. - SDI - Stepless Dynamic Induction The smoothly adjustable coil automatically takes care of the exceptional arc ignition properties and its high stability during welding. Adjustment can be done manually using the SDI knob. This allows for the regulation of the heat input, which can have a positive effect on the amount of necessary post-welding processing. - RSC – Realtime Speed Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. By using RSC, changes in the arc length are compensated faster and more effectively. - CCM – Characteristic Curie Memory A database of welding parameters integrated in the device with expert knowledge. By selecting a set of wire type and diameter and welding current voltage level, the previously set welding parameters are synergistically selected. During welding, the current parameter values are compared with the set parameters and, if necessary, immediately corrected. - RMI – Rehm Machine Interface The control panel of the device is extremely simple and guarantees the avoidance of erroneous selection. Simple selection of parameters facilitates the welder's work and allows for minimizing errors and minimizing the time of setting the device.

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V Lhedpfxextfqxe Adweb • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Lodpfx Aoxld Awodwjhb

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Lsdpfsxbd U Eex Adwehb

Condition: excellent (used), Rowatec MM 33 -Transformer welder -Transformer on thick copper -Power 330A-60% 250A-100% -Voltage range 15.8V-33V -Current protection 22A 400V -Step voltage adjustment( 10 fine positions, 2 coarse positions) -Smooth adjustment of wire feed Lhjdpfxeuyg Imj Adweb -Wire feed 4 rollers -Welding mode : 2 bar , 2 bar spot, 2 bar time, 4 bar , 4 bar spot , 4 bar time - Infinitely adjustable break time and welding duration -Wire discharge time after welding

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Ljdeulc Ixopfx Adwjhb Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, number of axes: 9, This 9-axis Hanwha XDI32-N was manufactured in 2021, featuring a dual spindle system with a maximum speed of 6,500 rpm and power of 2.2/5.5 kW each. It supports a maximum work diameter of 32 mm and includes a 315-liter cooling tank. Ideal for precision Swiss-type turning, this machine ensures efficient and reliable performance. If you are looking to get high-quality turning capabilities, consider the Hanwha XDI32-N machine we have for sale. Contact us for more information. • Power supply: 3-phase 200/220 VAC • Current: 60 A • Frequency: 50/60 Hz • Short-circuit nominal current: 20 kA • Press operation (compressed air): 4–6 kg/cm² (3.9–5.9 bar) • Pallet height: 1120 mm • Main spindle max work diameter: 32 mm • Secondary spindle motor type: integrated Lodpfx Ajx D Rn Dedwshb • Secondary spindle max work diameter: 32 mm • Secondary spindle bore diameter: 32 mm • Cooling tank capacity: 315 liters • Cooling pump power: 1.1 kW • Lubrication tank capacity: 1.8 liters • Lubrication pump power: 5 W • Lubrication consumption: 8 cc / 30 min • Pneumatic air consumption: 20–30 liters/min • X1-axis external diameter travel: 64 mm • Y1-axis external diameter travel: 383 mm • X2-axis external diameter travel: 100 mm • Y2-axis external diameter travel: 383 mm • X3-axis external diameter travel: 404 mm • Y3-axis external diameter travel: 283 mm

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers Lodpfxsx Tgvrj Adwohb - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Year of construction: 1990, condition: ready for operation (used), controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis Nicolas Correa A-16 was manufactured in 1990. It features a CNC-controlled X, Y, and Z axis, a horizontal spindle, and a fixed table suitable for heavy-duty milling operations. The rigid cast-iron structure is designed for high stability. Although the CNC control has a fault, the machine is in good mechanical condition with a complete overhaul of the headstock motor carried out in 2024. Contact us for more information about this machine. • Operation mode: Manual/automatic operation (depending on configuration) • Spindle: Horizontal spindle • Table: Fixed table; suitable for heavy-duty milling operations Lodpoyctg Ujfx Adwjhb • Construction: Rigid cast-iron structure; designed for high stability and accuracy • Condition: • Machine is in good mechanical condition • Headstock motor completely overhauled in 2024 • Paintwork in good condition (including push-button panel and general appearance) • CNC / Control: • CNC control has a fault • Control model: Heidenhain TNC 415 (no longer supported by manufacturer) • Control unit and monitor are currently dismounted • Machine requires a control retrofit / control replacement to be operational Additional equipment • No additional equipment mentioned (e.g., robots, automation, chip conveyor, bar feeder).

Condition: used, Year of construction: 2024, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, · Max. Tragkraft 6000 kg · höhe 25.90 m · Maximale seitliche Reichweite 21.70 m · Gesamtlänge mit Gabeln 9.28 m Lhedpjya Ixgjfx Adwob · Länge bis zur Vorderseite der Gabeln 8.08 m · Gesamtbreite 2.50 m · Gesamthöhe 3.10 m · Gesamtbreite der Kabine 0.96 m · Bodenfreiheit Maschine 0.38 m · Radstand 3.05 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Drehung des Oberwagens 360 ° · Gewicht 18000 kg · Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 100 mm x 60 mm · Reifenmodelle 445/65 R22,5 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FHT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung 156 Hp / 115 kW · Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Kühlsystem des Motors Wasserkühlung · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatisch · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 8600 daN · Parkbremse Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Fassungsvermögen des Kraftstofftanks 270 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 68 dB · Umgebungsgeräusch (LwA) 108 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2000, machine/vehicle number: A 00 12 006 / 0100, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm Ledpfxsx Ihvpo Adwehb - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump Lhjdpfx Aox Ihvvsdwjb - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction Lsdpfxox Ihvio Adwehb - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, The KNWP H 100 is a robust Motorized Workshop Press, part of the Workshop Presses category by KNUTH. This hydraulic workshop press features a torsionally rigid welded gantry-style frame, making it ideally suited for professional use in technical workshops and maintenance departments. Its stable portal design includes an adjustable open support table that allows for versatile applications, such as pressing in and out bearings, assembly work, and testing workpieces. The press boasts a finely adjustable press force of up to 100 tons and a long piston stroke of 400 mm, ensuring efficiency and adaptability for various tasks. Operators can monitor the current working pressure via the built-in gauge, while the horizontal adjustment of the working cylinder simplifies setup without needing to reposition the workpiece. To enhance reliability, the KNWP H 100 is equipped with premium components and includes a motorized hydraulic drive, movable working cylinder, and height-adjustable work table. For anyone seeking a dependable Motorized Workshop Press, the KNWP H 100 is an excellent choice—request a quote today to add this essential tool to your lineup. Lhjdpfx Adjuyh A Eewjb

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Lhodpoycyblofx Adwob Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 1,532 h, load capacity: 3,500 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,240 mm, fork length: 850 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 9,300 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,100 mm, total width: 2,200 mm, color: green, motor model: V2003-M-T-ES01, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 🏆 Years of experience | 🛠️ In-house service & paint facility | 💡 Professional consultancy | 🚛 Own transport fleet | 🤝 Comprehensive after-sales support ❓ Looking for a forklift you can trust? We are a recognized supplier of new and used forklifts with a long-standing track record. We serve clients throughout Europe – from small enterprises to major industrial operations. Our forklifts are not just machines – they are your assurance of reliable and efficient intralogistics. 🌟 Why choose us? ✅ Every forklift receives a full technical inspection (comprehensive check, testing, filter and oil replacement, reconditioning of main components) 📄 UDT certificates available upon request 🎨 In-house paint and service workshop – each truck is brought to top visual and technical standards 🚛 Pan-European delivery – performed by our own trained drivers 👨‍🏫 Operator briefing and functional demo at your site upon delivery 🔧 After-sales service & technical support – we stay with you beyond the sale 👀 Machine viewing and test drives available at our headquarters – you are invited! 🌍 Hundreds of satisfied customers across Europe – join those who already trust us 💶 Financing solutions – partnerships with major leasing firms 🧾 Invoice in EUR or PLN – as preferred by our clients 🔥 CURRENTLY IN STOCK: COMBILIFT C3500 – Four-Way / Multi-Directional Forklift 📅 Year: 2008 ⏱️ Hours: 1,532 ⛽ Power: Diesel 📦 Load capacity: 3,500 kg 📏 Mast: Duplex – 4,100 mm lift height 🔩 Hydraulic fork positioner 1,240 mm | Forks 850 mm 🛞 Superelastic tyres – 100% tread condition ⬆️ Free lift: 2,000 mm ⚙️ Condition: Excellent – thoroughly serviced ✨ Appearance: Very well-kept, rust-free, fully operational 📐 Dimensions: Overall height: 2,400 mm Length: 2,100 mm Width: 2,200 mm Positioner width: 1,240 mm Cabin height: 2,800 mm 📦 Ideally suited for: 🏭 Warehouses with narrow aisle layouts 🌲 Timber, steel, and tube handling applications 📏 Long load handling Lsdpfx Aeycx Uwodwjhb 🏢 Both indoor and outdoor use 🚀 FT Logistics – Dependable quality. Trusted service.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,446 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 400 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 800 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: superelastic tires (black), rear tire size: 23 X 10 - 12, overall weight: 7,200 kg, empty load weight: 4,700 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,950 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of Experience | 🛠 In-house Service & Paint Facility | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Are you seeking a forklift you can rely on? We are a reputable dealer of new and used forklifts, backed by many years of experience and tradition. We serve clients across Europe – from small enterprises to major international industrial sites. Our forklifts are not just machines – they are your assurance of smooth and dependable logistics. 🌟 Why choose us? ✅ Each forklift undergoes a thorough technical overhaul (inspection, testing, oil and filter replacement, refurbishment of key components) ✅ Optional full safety certification (UDT) upon request ✅ In-house paint shop and service workshop – forklifts finished to the highest technical and visual standards ✅ Europe-wide transport, handled by our own fleet and trained drivers ✅ Operator training upon delivery + full onsite functionality check at your location ✅ After-sales and technical support – we stand by our customers post-sale ✅ On-site viewing and testing of machines – you are always welcome! ✅ Hundreds of satisfied clients across Europe – join those who already trust us ✅ Financing available – we work with leading leasing companies ✅ Invoice available in EUR or PLN – at your preference 🚀 Currently available: Lhedpfoycx H Tex Adweb COMBILIFT C2500 – 4-Way Compact Forklift ✅ Year of manufacture: 2012 ✅ Operating hours: 2,446 ✅ Fuel: LPG ✅ Lifting capacity: 2,500 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1200 mm | Telescopic forks 800 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – fully serviced ✅ Visual condition: Clean, rust-free, ready to work ✅ Free lift: 1,500 mm 📐 Dimensions: Height: 2,350 mm Overall length: 1,900 mm Width: 1,950 mm Positioner width: 1,200 mm Overall height: 2,350 mm 🏭 Ideal for: Narrow aisle warehouses Wood, steel, and pipe industries Handling long loads Indoor and outdoor use ✨ FT Logistics – Quality you can rely on. Service you can trust.

Year of construction: 2008, operating hours: 26,580 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6, overall weight: 4,600 kg, screw diameter: 40 mm, This Battenfeld HM 100/525 was manufactured in 2008. A hydraulic injection moulding machine with a screw diameter of Ø40 mm and injection volume of 251 cm³. It features tie bar spacing of 470 x 420 mm and has been operating for approximately 26580 hours. Currently used with a Battenfeld UNIROB R10S robot for producing polypropylene containers. Net weight is 4600 kg. Contact us for more information about this machine. • Total operating hours: approx. 26,580 h • Current application: Producing PP (polypropylene) containers; currently running with a robot (see Additional equipment) • Injection unit: Ljdeychvqspfx Adwjhb • Injection volume: 251 cm³ • Clamping unit: • Tie bar spacing: 470 x 420 mm • Number of core pulls: 1 Additional equipment • Robot: • Manufacturer: BATTENFELD • Model: UNIROB R10S • Year of manufacture: 2007 • Type: Cartesian handling robot

Year of construction: 2014, operating hours: 36,714 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6P, overall weight: 6,500 kg, screw diameter: 50 mm, This Battenfeld HM 150/750 UNILOG B6P was manufactured in 2014. It features a screw diameter of Ø50 mm and an injection volume of 441 cm³. The tie bar spacing is 520 x 470 mm, and it has operated for approximately 36714 hours. Ideal for polystyrene processing, this hydraulic injection moulding machine weighs 6500 kg. If you are looking to get high-quality injection molding capabilities, consider the Battenfeld HM 150/750 UNILOG B6P machine we have for sale. Contact us for more information. • Injection volume: 441 cm³ • Clamping unit: • Tie bar spacing: 520 x 470 mm • Number of cores: 1 • Operating data: • Total operating hours: approx. 36,714 h • Hydraulics & electrics: • Hydraulic system pressure: 277 bar Lhsdpfjychiqox Adwob • Type of current: 3-phase + N • Frequency: 50 Hz • Rated voltage: 400 V • Current application: • Material: Polystyrene (PS)

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23.03.2026 and 27.03.2026! TECHNICAL DETAILS Maximum tensile strength (stainless steel): 600 N/mm² Sheet thickness (stainless steel): 0.5 mm - 1.25 mm Typical sheet thickness (stainless steel): 1.0 mm Maximum tensile strength (steel): 410 N/mm² Sheet thickness (steel): 0.5 mm - 2.0 mm Typical sheet thickness (steel): 1.5 mm Maximum tensile strength (aluminium): 265 N/mm² Sheet thickness (aluminium): 0.5 mm - 3.0 mm Typical sheet thickness (aluminium): 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Max. diagonal: 2,800 mm Max. centring measurement: 2,500 mm MACHINE DETAILS Hydraulic system Oil capacity (main machine): approx. 500 dm³ Oil capacity (scissor lift table): approx. 20 dm³ Ljdpjycqucefx Adwshb Cooling system (closed) Cooling unit R81: approx. 175 litres Cooling unit R101: approx. 260 litres Power supply connections Mains voltage: 400 V Frequency: 50/60 Hz Cable cross-section: 4 × 25 mm² Main fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / monitor / power supply units: 220 V AC Open cooling system Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Machine tolerances Angular accuracy: ±1° Dimension tolerance of bent parts: ±0.2 mm Repeatability: ±0.1 mm Centring positioning accuracy: ±0.1 mm Straightness of bent parts: ±0.1 mm/m Tool setup time: Automatic during loading/unloading Length setting: Via bending program and in increments of 4 (5) mm Dimensions & weight Footprint (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Presumably up to 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Type: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot converted to magnetic lifter EQUIPMENT Various spare parts in wooden crates

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: Ljdpfx Adjxvdryowohb • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. • Cutting capacity: • Cutting length: 3,050 mm • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² • Hydraulic system: Lsdpfx Asycfq Sjdwjhb • Oil volume: 300 liters • Electrical data: • Current type: AC • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796