Used Edge Machine for sale (92,629)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Blsdexl Ufvopfx Abzjp Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: new, Year of construction: 2025, Bandwidth: 200mm Bljdehy Iyvspfx Abzjp Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm veneer sanding device: yes oscillation: yes sanding unit swiveling: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Bedsxf Ewvepfx Abzjlp Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: excellent (used), Year of construction: 1993, Klein - Edge banding machine KTD51 for moldings And straight edges, with direct glue application. Workpiece length min. 160 mm, workpiece thickness 10 - 40 mm Edge thickness 0.5 - 1 mm, inner radius approx. 25 mm Year of manufacture 1993, feed adjustable 4 - 9 m/min, 2.6 kw, 400 Volt Bodsvf H I Tepfx Abzjlp

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Bsdexh Spkspfx Abzolp Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min.

Condition: used, Edge beveling machine, edge milling machine ACKERMANN & SCHMITT Type ZL 1104 Edge breaking machine, deburring machine, edge deburring device For aluminum and plastic processing and small chamfers on steel. Year of manufacture: approx. 1995 Chamfer size: 0-4 mm Chamfer angle: 45° Cutter head: Ø approx. 40 mm Material support: 90° x 400 mm Speed: 4500 rpm Motor power: 700 watts Power supply: 220 volts, 50 Hz - Infinitely adjustable chamfer size, 0-4 mm - Built-in milling cutter with carbide indexable inserts - Milling motor with 8 mm collet chuck - Workpiece support 90° Blodjxcbmuopfx Abzep - Workpiece support mount defective, needs repair - Motor runs well Net weight: 3 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Bledpfx Abevm Efaozsp

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Bedpfx Ajw I U Rfjbzelp Location: Flörsheim

Condition: used, Year of construction: 2009, No. 04487 Edge banding machine Format4 Perfect 50 Used, year of construction 2009 Bledpfxsxbf S Ej Abzsp 114 operating hours Touchscreen color display Panel thickness 10 - 55 mm Minimum panel width 60 mm Minimum panel length 140 mm Edge thickness 0.4 - 8 mm Edge height 12 - 63 mm Variable feed speed from 12.5 m/min Spraying of release and cleaning agents - Workpiece chain conveyor - Glue roller and glue unit, Teflon-coated, for EVA hot melt adhesive - Pressing unit - Impact shears for precutting - Cross-cut saw unit, pneumatically controlled, inclination 0° - 15° - Combination trimming unit for flush and radius trimming, inclination up to 15° - Scraper unit - Polishing unit - Blow-drying unit Suction connection diameter 2 x 120 mm Operating instructions and electrical circuit diagram available Transport dimensions approx. 4250 x 1100 x 1700 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Blodsvnwf Ujpfx Abzsp Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: new, Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Bedsxh Spdepfx Abzslp Feed speed 12 m/min.

Condition: used, OTT Pacific V12 - Edgebanding SPS-compatible control with LCD display Pre-milling unit with plunge control Fully automatic roll magazine / crosscut shear High-speed gluing station Automatic pressure unit Pneumatic trimming 0-10° Flush milling/chamfer milling 15/30/45° - 8 mm Radius milling R-2, R-5 Corner rounding Radius scraper Bodpfx Aew Nqg Ejbzjlp Surface scraper - will be converted to Schwabbel unit Soundproof cabin with central extraction Machine is WORKSHOP OVERHAULED in VERY GOOD CONDITION Available from stock Lieboch

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Bloded Tb U Sspfx Abzop

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in a single pass. There are 2 brush sanding heads installed on both the left and right sides. Process: Bedpjwpwukefx Abzjlp 1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. 3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm - Year of manufacture: 2002 - A new Siemens S7-1200 will be installed for material control. - Location: in stock

Condition: good (used), Year of construction: 1989, Machine with full equipment Bedjf Ua R Hepfx Abzolp Length approx. 9 m Edge gluing Edge sawing Pre-milling Rounding milling Corner copying Pull scraper Buffing Corner copying

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding Machine HolzHer 1321, in very good and fully functional condition, regularly in operation, edging programs available, solid industrial machine. Bsdexiv Efopfx Abzjlp - Pre-milling unit/jointing with spare DIA cutter - Glue application unit upgraded approx. 2-3 years ago to continuous slot nozzle pressure track - Glue height and edge thickness fully controllable via display, supports cartridges or granulate, PU glue possible - Panel preheating - Top and bottom pre-milling with separate units - Motorized rounding milling up to 2 mm - End trimming unit, straight/angled - Radius scraper - Corner copying unit - Surface scraper - Buffing unit Machine is in ready-to-use condition. Still regularly in use until approx. CW42/43, can be tested on site.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 14,360 h, Felder G580 edge banding machine, pre-milling units, roller glue application, pneumatic pre-cut guillotine, pressure rollers, end-trim saws, top-bottom milling unit R1-R2, corner rounding unit, profile scraper, flat scraper, polisher, edge thickness 0.4-5 mm, maximum panel height 60 mm, feed speed 11 m/min, total power required 7.22 KW, machine length 410 cm, well-maintained machine, ready for testing, net price, Bljdpfx Absxcg Nzszjp

Condition: used, OTT Tornado - TOP Blodpfowcymcex Abzep Control - via a 15-inch color touchscreen monitor for full automation and maximum ease of use CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules Joining unit for joining chipboard Automatic roller magazine Automatic edge magazine Double end mill with automatic tilting 0° / 3° Flush milling unit - for flush milling - 12mm Fine milling RADIUS - radius milling - profile knives R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius - chamfer Surface scraper unit Lubricant spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tooling included Machine is in EXTREMELY MINT CONDITION WELL-MAINTENANCE First commissioned in 2011, very few operating hours, approximately 1200 Machine from lease / leasing option from Lieboch warehouse

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications Bodpfx Abed N Tdmszelp working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in a single pass. There are 2 brush sanding heads installed on both the left and right sides. Process: 1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. 3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. Bedpfx Aewpwuqsbzjlp - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm - Year of manufacture: 2002 - A new Siemens S7-1200 will be installed for material control. - Location: in stock

Condition: excellent (used), Year of construction: 2012, Stefani Evolution C double-sided edgebanding machine Year of production: 2012 Technical condition: very good The Stefani Evolution C is designed for precision veneering of straight and profiled edges of furniture panels made of various materials, such as particleboard, MDF or plywood. Thanks to its advanced features and high quality workmanship, the machine provides excellent results in the production of office furniture, kitchen furniture, bathroom furniture and other home furnishings. Working width max: 3200 mm Working width min: 225mm PC control Stefani Winedge plus software v06.14.000 Longitudinal machining Bledpfxou U N Ago Abzsp Transverse machining

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Bjdexix Hxspfx Abzjlp Radius milling unit: Yes Radius scraper: Yes

Condition: good (used), Year of construction: 2007, Used edge banding machine - Model KAL 310 - Year of manufacture 2007 Bodpfx Abjxhc Siszolp - Including return conveyor - In good and fully operational condition - Photos & video available

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Blodpfx Aow Igg Sjbzjp Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, OTT Atlantic Bsdpfx Absw Np Dpozolp SPS-based control system High-speed gluing unit Automatic roll and edge magazine Automated swivelling flush-trimming unit Flush milling Chamfering and radius milling Scraper unit Finish buffing unit All units are controlled via SPS from the operator panel Soundproof enclosure with integrated central extraction The machine is WORKSHOP-TESTED and FULLY FUNCTIONAL Ex stock Lieboch, net €3,000.00